Fast delivery within 72 Hours
B&R X67AM1223
€ 603,14
3 in stock
2 analog inputs, 2 analog outputs, ±10 V eachOpen circuit detection on the inputsConfigurable digital input filtersVery short cycle timesOptimal shield grounding on all channels…
3 in stock
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
2 analog inputs, 2 analog outputs, ±10 V eachOpen circuit detection on the inputsConfigurable digital input filtersVery short cycle timesOptimal shield grounding on all channels
The module is equipped with 2 inputs and 2 outputs with 12-bit digital converter resolution. The range of the input/output signal is ±10 V.
Specification
| I/O module | 2 analog inputs, 2 analog outputs, each ±10 V |
|---|---|
| B&R ID code | 0x1465 |
| Status indicators | I/O function per channel, supply voltage, bus function |
| Inputs | Yes, using LED status indicator and software |
| I/O power supply | M8, 4-pin |
| X2X Link | M12, B-coded |
| Inputs/Outputs | 4x M12, A-coded |
| Internal I/O | 3 W |
| X2X Link power supply | 0.75 W |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| ATEX | Zone 2, II 3G Ex nA IIA T5 Gc IP67, Ta = 0 – Max. 60°C TÜV 05 ATEX 7201X |
| UL | cULus E115267 Industrial control equipment |
| HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| KC | Yes |
| Nominal voltage | 24 VDC |
| Voltage range | 18 to 30 VDC |
| Integrated protective function | Reverse polarity protection |
| Sensor/Actuator power supply | Max. 12 W |
| Voltage | INT 0x8001 – 0x7FFF / 1 LSB = 0x0010 = 4.882 mV |
| Voltage drop for short-circuit protection at 0.5 A | Max. 2 VDC |
| Summation current | Max. 0.5 A |
| Short-circuit proof | Yes |
| Input | ±10 V |
| Input type | Differential input |
| Digital converter resolution | 12-bit |
| Conversion time | 400 µs for both outputs |
| Output format | INT 0x8001 – 0x7FFF / 1 LSB = 0x0010 = 4.882 mV |
| Input impedance in signal range | 20 MΩ |
| Input protection | Protection against wiring with supply voltage |
| Permissible input signal | Max. ±30 V |
| Undershoot | 0x8001 |
| Overshoot | 0x7FFF |
| Conversion procedure | Successive approximation |
| Gain | 0.15% |
| Offset | 0.05% |
| Max. gain drift | 0.012%/°C |
| Max. offset drift | 0.015%/°C |
| DC | >50 dB |
| 50 Hz | >50 dB |
| Common-mode range | ±11 V |
| Crosstalk between channels | <-70 dB |
| Nonlinearity | <0.15% |
| Insulation voltage between channel and bus | 500 Veff |
| Cutoff frequency | 300 Hz |
| Slope | 40 dB |
| Output | ±10 V |
| Settling time on output change over entire range | Approx. 1 ms |
| Switch on/off behavior | Internal enable relay for startup and errors |
| Output protection | Protection against wiring with supply voltage, short-circuit proof |
| Load per channel | Max. ±10 mA, load ≥ 1 kΩ |
| Output filter | First-order low-pass filter / cutoff frequency 2.5 kHz |
| Error caused by load change | Max. 0.01%, from 10 MΩ → 1 kΩ, resistive |
| Output response when the power supply is switched on/off | An enable relay is switched on at a defined value ≠ 0, default setting = 10 kΩ to GND |
| Current limiting | ±40 mA |
| To GND | Yes |
| To sensor or I/O power supply | Yes |
| Electrical isolation | Channel isolated from bus Channel not isolated from channel |
| Any | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP67 |
| Operation | -25 to 60°C |
| Derating | – |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Width | 53 mm |
| Height | 85 mm |
| Depth | 42 mm |
| Weight | 195 g |
| M8 | Max. 0.4 Nm |
| M12 | Max. 0.6 Nm |
Reviews
Clear filtersThere are no reviews yet.