Fast delivery within 72 Hours
B&R X20cCP1301
Intel x86 200 MHz compatible with integrated I/O processorOnboard Ethernet and USB1 slot for modular interface expansion30 digital inputs/outputs and 2 analog inputs integrated in the device1 GB onboa…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
Intel x86 200 MHz compatible with integrated I/O processorOnboard Ethernet and USB1 slot for modular interface expansion30 digital inputs/outputs and 2 analog inputs integrated in the device1 GB onboard flash drive128 MB DDR3 SDRAMFanlessNo batteryBacked-up real-time clock
The X20 Compact controller series is characterized by 3 integrated I/O modules. The device is equipped with 30 different digital inputs/outputs and 2 analog inputs. 1 analog input can be used for Pt1000 resistance temperature measurement. The X20CP1301 is equipped with an Intel x86 200 MHz compatible processor, 128 MB RAM and 1 GB built-in flash drive. The FRAM for storing remanent variables has 16 kB available. A fanless and battery-free design ensures maintenance-free operation. The controller is equipped with one Ethernet, one USB and one RS232 interface. Various bus and network systems can be flexibly integrated into the X20 system via a freely usable slot for X20 communication modules.
Specification
| Interfaces | 1x RS232, 1x Ethernet, 1x USB, 1x X2X Link |
|---|---|
| System module | Controller |
| B&R ID code | 0xEB58 |
| Cooling | Fanless |
| Status indicators | CPU function, Ethernet, RS232, PLC power supply, I/O power supply, I/O function per channel |
| Outputs | Digital outputs: Yes, using LED status indicator and software (output error status) |
| CPU function | Yes, using LED status indicator |
| RS232 data transfer | Yes, using LED status indicator |
| Inputs | Analog inputs: Yes, using LED status indicator and software |
| Ethernet | Yes, using LED status indicator |
| I/O power supply | Yes, using LED status indicator |
| Supply voltage monitoring | Yes, using LED status indicator |
| Temperature | Yes, using software register |
| Controller redundancy | No |
| ACOPOS support | Yes |
| ReACTION-capable I/O channels | No |
| Visual Components support | Yes |
| Power consumption without interface module and USB | 4.3 W |
| Power consumption for X2X Link power supply | 0.8 W |
| Internal I/O | 2.3 W |
| Additional power dissipation caused by actuators (resistive) [W] | – |
| Type of signal lines | Shielded lines must be used for all high-speed digital inputs/outputs, line length: Max. 20 m |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | Evaluation ongoing |
| ATEX | Zone 2, II 3G Ex nA nC IIA T5 GcIP20, Ta (see X20 user’s manual)FTZÚ 09 ATEX 0083X |
| UL | cULus E115267Industrial control equipment |
| HazLoc | cCSAus 244665Process control equipmentfor hazardous locations Class I, Division 2, Groups ABCD, T5 |
| DNV | Temperature: B (0 to 55°C)Humidity: B (up to 100%)Vibration: B (4 g)EMC: B (bridge and open deck) |
| LR | ENV1 |
| KR | Yes |
| ABS | Yes |
| BV | EC33BTemperature: 5 – 55°CVibration: 4 gEMC: Bridge and open deck |
| Input voltage | 24 VDC -15% / +20% |
| Input current | Max. 1 A |
| Fuse | Required line fuse: Max. 10 A, slow-blow |
| Reverse polarity protection | Yes |
| Nominal output power | 2 W |
| Parallel connection | Yes |
| Redundant operation | Yes |
| Nominal output voltage | 24 VDC |
| Permissible contact load | 10 A |
| Real-time clock | Retention for at least 300 hours, typ. 1000 hours at 25°C, 1 s resolution, -18 to 28 ppm accuracy at 25°C |
| FPU | Yes |
| Type | USB 1.1/2.0 |
| Clock frequency | 200 MHz |
| Data code | 16 kB |
| Program code | 16 kB |
| L2 cache | 128 kB |
| Integrated I/O processor | Processes I/O data points in the background |
| Modular interface slots | 1 |
| Remanent variables | 16 kB FRAM, retention >10 years |
| Shortest task class cycle time | 2 ms |
| Typical instruction cycle time | 0.0419 µs |
| RAM | 128 MB DDR3 SDRAM |
| Data retention | 10 years |
| Guaranteed | 40 TB |
| Results for 5 years | 21.9 GB/day |
| Guaranteed erase/write cycles | 20,000 |
| Error-correcting code (ECC) | Yes |
| Signal | Ethernet |
| Variant | Standard outputs and mixed channels: Current-sourcing FETHigh-speed outputs: Push-Pull |
| Max. distance | 900 m |
| Transfer rate | 10/100 Mbit/s |
| Line length | Max. 100 m between 2 stations (segment length) |
| Physical layer | 10BASE-T/100BASE-TX |
| Half-duplex | Yes |
| Full-duplex | Yes |
| Autonegotiation | Yes |
| Auto-MDI/MDIX | Yes |
| Max. output current | 0.5 A |
| Fieldbus | X2X Link master |
| Quantity | 4 standard outputs, 4 high-speed outputs and 4 mixed channels, configuration as input or output using software |
| Nominal voltage | 24 VDC |
| Input current at 24 VDC | X1 – Standard inputs: Typ. 3.5 mAX2 – Standard inputs: Typ. 2.68 mAX2 – High-speed inputs: Typ. 3.5 mAX3 – Mixed channels: Typ. 2.68 mA |
| Input circuit | Sink |
| Hardware | Standard inputs and mixed channels: ≤200 μsHigh-speed inputs: ≤2 μs, when used as standard inputs: ≤200 μs |
| Software | Default 1 ms, configurable between 0 and 25 ms in 0.1 ms increments |
| Connection type | 1-wire connections |
| Input resistance | X1 – Standard inputs: 6.8 kΩX2 – Standard inputs: 8.9 kΩX2 – High-speed inputs: 6.8 kΩX3 – Mixed channels: 8.9 kΩ |
| Additional functions | X2 – High-speed digital inputs:2x 250 kHz event counting, 2x AB counter, ABR incremental encoder, direction/frequency, period measurement, gate measurement, differential time measurement, edge counters, edge times |
| Low | <5 VDC |
| High | >15 VDC |
| Encoder inputs | 24 V, asymmetrical |
| Counter size | 32-bit |
| Input frequency | Max. 10 kHz |
| Evaluation | 1x |
| Encoder power supply | Module-internal, max. 300 mA |
| Overload characteristics of encoder power supply | Short-circuit proof, overload-proof |
| Signal form | Square wave pulse |
| Counter frequency | 250 kHz |
| Possible measurements | Period measurement, gate measurement, differential time measurement, edge counter, edge times |
| Measurements per module | Each function up to 2x |
| Timestamp | 1 µs resolution |
| Input | Resistance measurement with constant current supply for 2-wire connections |
| Input type | Differential input |
| Voltage | <0.025% |
| Current | <0.05% |
| Conversion time | Only temperature input enabled: 200 µsTemperature and analog input enabled: 400 µs |
| Data type | INT |
| Input protection | Protection against wiring with supply voltage |
| Output of digital value during overload | Configurable |
| Conversion procedure | SAR |
| Input filter | First-order low-pass filter / cutoff frequency 7 Hz |
| Gain | 0.3% (Rev. <C0: 1.93%) |
| Offset | 0.15% (Rev. <C0: 0.32%) |
| DC | 70 dB |
| 50 Hz | >60 dB |
| Common-mode range | 1 V |
| Crosstalk between channels | <-70 dB |
| Digital converter resolution | 13-bit |
| Output format | INT or UINT for resistance measurement |
| Pt1000 | -200 to 850°C |
| Resistance measurement range | 0.1 to 4000 Ω |
| Temperature sensor resolution | 1 LSB = 0x0005 = 0.16°C |
| Resistance measurement resolution | 1 LSB = 0x0005 = 0.49 Ω |
| Sensor standard | EN 60751 |
| Linearization method | Internal |
| Measuring current | 1 mA |
| Permissible input signal | Short-term max. ±30 V |
| Max. gain drift | 0.023 %/°C |
| Max. offset drift | 0.012%/°C |
| Nonlinearity | <0.05% |
| Standardized range of values for resistance measurement | 0.1 to 4000.0 Ω |
| Switching voltage | 24 VDC -15% / +20% |
| Nominal output current | Standard outputs and mixed channels: 0.5 AHigh-speed outputs: 0.2 A |
| Total nominal current | Standard outputs and mixed channels: 4 AHigh-speed outputs: 0.8 A |
| Output circuit | Standard outputs and mixed channels: SourceHigh-speed outputs: Sink or source |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit (see value “Short-circuit peak current”)Internal freewheeling diode for switching inductive loads (see section “Switching inductive loads”) |
| Period duration | 5 to 65535 µs corresponds to 200 kHz to 15 Hz |
| Pulse duration | 0 to 100%, minimum 2.5 µs |
| Resolution for pulse duration | 0.1% of the configured frequency |
| Diagnostic status | Standard outputs and mixed channels: Output monitoring with 10 ms delayHigh-speed outputs: Output monitoring with 10 µs delay |
| Leakage current when the output is switched off | Standard outputs and mixed channels: 5 µAHigh-speed outputs: 25 µA |
| RDS(on) | 140 mΩ |
| Residual voltage | Standard outputs and mixed channels: <0.1 V at nominal current 0.5 AHigh-speed outputs: <0.9 V at nominal current 0.1 A |
| Peak short-circuit current | Standard outputs and mixed channels: <3 AHigh-speed outputs: <20 A |
| Switch-on in the event of overload shutdown or short-circuit shutdown | Standard outputs and mixed channels: Approx. 10 ms (depends on module temperature)High-speed outputs: No switch-on |
| 0 → 1 | Standard outputs and mixed channels: <300 µsHigh-speed outputs: <3 µs |
| 1 → 0 | Standard outputs and mixed channels: <300 µsHigh-speed outputs: <3 µs |
| Resistive load | Standard outputs and mixed channels: Max. 500 HzHigh-speed outputs: 50 kHz, max. 200 kHz (see section “Switching frequency derating for high-speed digital outputs”) |
| Inductive load | See section “Switching inductive loads”. |
| Braking voltage when switching off inductive loads | Standard outputs and mixed channels: Typ. 45 VDC |
| Electrical isolation | Ethernet (IF2) and X2X (IF6) isolated from each other, from other interfaces and from PLCChannel isolated from busChannel not isolated from channel or PLC |
| Horizontal | Yes |
| Vertical | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
| Horizontal mounting orientation | -25 to 60°C |
| Vertical mounting orientation | -25 to 50°C |
| Derating | See section “Switching frequency derating for high-speed digital outputs”. |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
| Operation | Up to 100%, condensing |
| Note | X20 end cover plate (right) included in delivery3 X20 terminal blocks (16-pin) included in deliveryInterface module slot cover included in delivery |
| Width | 164 mm |
| Height | 99 mm |
| Depth | 75 mm |
| Weight | 300 g |
Reviews
Clear filtersThere are no reviews yet.