Fast delivery within 72 Hours
B&R 8I86T400400.00-000
Base device for ACOPOSinverter P86, 3x 380 to 480 V, 4.0 kW, EMC filter and brake chopper.Order number – ACOPOSinverter P86:8I86T400400.0P-100: Inverter with POWERLINK communication card
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
Base device for ACOPOSinverter P86, 3x 380 to 480 V, 4.0 kW, EMC filter and brake chopper.Order number – ACOPOSinverter P86:8I86T400400.0P-100: Inverter with POWERLINK communication card
Specification
| CE | Yes |
|---|---|
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| UL | cULus E225616Power conversion equipment |
| Specified on nameplate | 4 kW (5 HP) |
| Mains input voltage | 3x 380 VAC -15% to 480 VAC +10% |
| Frequency | 50 to 60 Hz ±5% |
| Apparent power (at 480 VAC) | 8.8 kVA |
| Max. assumed short-circuit current (Isc)(short-circuit current at connection point) | 5 kA |
| Inrush current | Max. 36.1 A |
| At 380 VAC | 13.4 A |
| At 480 VAC | 10.6 A |
| External cooling | 136 W |
| Integrated EMC filter | Yes |
| Motor cable length per IEC/EN 61800-3 Cat. C2 environment 1 (public power network) | C2 level at 4 kHz with 50 m cable |
| Motor cable length per IEC/EN 61800-3 Cat. C3 environment 2 (industrial power system) | C3 level at 4 kHz with 100 m cable |
| With add-on filter | 8I0FT025.200-1 |
| Motor cable length per IEC/EN 61800-3 Cat. C1 environment 1 (public power network) | – |
| Nominal output current | 9.3 A |
| At nominal clock frequency (4 kHz or 2.5 kHz with higher inverter power) | No derating (up to 50°C) |
| Other clock frequencies | The derating curves are included in the installation instructions, which can be downloaded from www.br-automation.com. |
| Starting at 1000 m above sea level | 1%, per 100 m |
| Max. transient current for 60 s | 14 A |
| Max. transient current for 2 s | 16.7 A |
| Output frequency range | 0.1 to 599 Hz |
| Nominal clock frequency | 4 kHz |
| Min. | 2 kHz |
| Max. | 16 kHz |
| Shielded cable | 100 m |
| Non-shielded cable | 100 m |
| Induction motor | Sensorless vector control:1. Voltage controlled with constant torque→ Default mode2. Voltage controlled with variable torque→ Energy-saving mode, e.g. for fans and pumpsVector control with encoder:1. Current-controlled with constant torque→ Default modeSensorless slip control:1. With V/f characteristic curve for constant torque→ Default mode2. With V/f characteristic curve for constant torque (up to 6 f ranges)→ Mode for individual special applications3. With V/f characteristic curve for quadratically increasing torque→ Energy-saving mode, e.g. for fans and pumps |
| Synchronous motor | Sensorless vector control:1. Voltage controlled with constant torque→ Default modeVector control with encoder:1. Current-controlled with constant torque→ Default mode |
| Main protective functions of inverter | Thermal protection against power stage overheatingProtection against short circuits between motor phases, overcurrent between output phases and ground, overvoltages on the DC bus, exceeding the speed limit. Safety function for: Overvoltage and undervoltage of the mains supply, mains phase failure with 3-phase power supply |
| Integrated dynamic brake transistors | Yes |
| Min. resistance value (external) | 31 Ω |
| Input voltage | 24 VDC (min. 20.4 VDC, max. 27 VDC) |
| Current | 500 Ω |
| Output voltage 24 VDC | 24 VDC (min. 20.4 VDC, max. 27 VDC) |
| Max. output current at 24 VDC | Max. 200 mA |
| Output voltage 10 VDC | 10.5 VDC ±5% |
| Max. output current at 10 VDC | Max. 10 mA |
| Type | Type 3 |
| Quantity | 1 |
| Nominal voltage | 30 VDC / 250 VAC |
| Input circuit | Source |
| Low | <0.6 V |
| High | >2.5 V |
| Input - ACOPOSinverter | Yes |
| Input - Input | No |
| Sampling time | 5 ms ±1 ms |
| Input impedance | 2.2 kΩ |
| Input frequency | 0 to 30 kHz |
| Nonlinearity | ±0.2% |
| Basic accuracy | ±1% with temperature fluctuation of 60°C |
| Voltage | 470 Ω |
| Resolution | 10-bit |
| Max. voltage | 30 VDC |
| Output circuit | Source or sink |
| Max. current | 100 mA |
| Switching current range | Min. switching current: 5 mA at 24 VDCMax. switching current:R1: At cos φ = 1: Max. 3 A / At cos φ = 0.4: Max. 2 AR2: At cos φ = 1: Max. 5 A / At cos φ = 0.4: Max. 2 A |
| Relay 1 | 1 changeover contact |
| Relay 2 | 1 normally open contact |
| Output - ACOPOSinverter | Yes |
| Output - Output | No |
| Response time (max.) | 5 ms ±0.5 ms |
| Output | 0 to 10 VDC or 0 to 20 mA |
| Power dissipation relative to continuous apparent power | IE2 (10, 25): 1% (3x 380 VAC), 0.7% (3x 480 VAC)IE2 (50, 25): 0.9% (3x 380 VAC), 0.7% (3x 480 VAC)IE2 (10, 50): 1.2% (3x 380 VAC), 0.9% (3x 480 VAC)IE2 (50, 50): 1.1% (3x 380 VAC), 0.9% (3x 480 VAC)IE2 (90, 50): 1.2% (3x 380 VAC), 1% (3x 480 VAC)IE2 (10, 100): 1.8% (3x 380 VAC), 1.3% (3x 480 VAC)IE2 (50, 100): 1.7% (3x 380 VAC), 1.4% (3x 480 VAC)IE2 (90, 100): 2% (3x 380 VAC), 1.7% (3x 480 VAC) |
| Nominal losses in standby mode | 15 W (3x 380 VAC), 16 W (3x 480 VAC) |
| Degree of protection per EN 61800-5-1 | IP20 |
| Degree of protection per EN 60529 | IP20 |
| Max. relative humidity per EN/IEC 60721-3-3 class 3K3 | 5 to 95%, non-condensing |
| Maximum installation elevation | ≤1000 m without derating1000 to 3000 m with Derating |
| Max. pollution degree per IEC/EN 61800-5-1 | 2 (non-conductive pollution) |
| Ambient conditions per IEC 60721-3-3 | Class 3C3 and 3S3 |
| Operating position | Vertical mounting orientation ±10° |
| Operation | -15 to 50°C without derating50 to 60°C with derating |
| Storage | -40 to 70°C |
| Max. vibration resistance | 1 gn 9 to 200 Hz EN/IEC 60721-3-3 class 3M31.5 mm peak to peak 2 to 19 Hz EN/IEC 60721-3-3 class 3M3 |
| Max. shock resistance | 15 gn (duration = 11 ms) per EN/IEC 60721-3-3 class 3M3 |
| Width | 85 mm |
| Height | 270 mm |
| Depth | 232.5 mm |
| Weight | 2.3 kg |
Reviews
Clear filtersThere are no reviews yet.