Fast delivery within 72 Hours

Wago 753-1631

The SMI Master is a standard interface to SMI-compliant electrical drives.The SMI Master operates up to 16 SMI LoVo drives. Several SMI Masters may be operated within a node.Communication between appl…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

The SMI Master is a standard interface to SMI-compliant electrical drives.The SMI Master operates up to 16 SMI LoVo drives. Several SMI Masters may be operated within a node.Communication between applications and SMI LoVo drives is performed via special IEC function blocks. These function blocks support both single and group addressing, as well as status monitoring.The SMI function blocks can be used with the 750 Series Programmable Fieldbus Controllers.Alternatively, the fieldbus coupler mode provides simple function calls for control without complex PLC programming.The SMI configurator is suitable for addressing, configuring and commissioning SMI LoVo drives.Additional functions: The programmed commands can be overwritten by an external sensor or switch via additional digital input.The drive can be switched off by a relay via additional digital output to save energy. The drive is automatically switched on again by the output before the next drive command. About SMI: SMI stands for Standard Motor Interface, a standard interface for electrical drives. SMI was developed to connect drives with integrated electronic circuitry for applications in shutters and sunshade systems. SMI is a protected word/image mark of the SMI Standard Motor Interface e.V. VR380 995 District Court Freiburg.

Specification

Technical data

Device specificationSMI Master Interface per “SMI Data Format and Framework Protocol” Specifications Rev. 3.0.2BF and “HMI Hardware Specification” Rev. 3.0
Number of digital inputs1
Number of digital outputs1
Number of SMI channels1 (1 … 16 SMI LoVo slaves per channel)
Input characteristicType 1
Input voltage (max.)31.2 VDC
Output current (per channel)0.5 A; per digital output
Data width12-byte data
Commissioningvia WAGO SMI Configurator or IEC libraries
Supply voltage (system)5 VDC; via data contacts
Current consumption (5 V system supply)34 mA
Supply voltage (field)24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission (field side supply voltage only) via spring contact)
Current consumption, field supply (module with no external load)10 mA
Isolation3 kVAC RMS, 4 kV surge (system/SMI); 1.5 kVAC RMS, 2.5 kV surge (system/field)
IndicatorsLED (A, C, D, G, H) green: local bus status, TxD (data transmission), digital input, RxD (data reception), digital output; LED (B, E) red: undervoltage, error; LED (F) yellow: operating mode
Number of incoming power jumper contacts2
Number of outgoing power jumper contacts2

Connection data

Connection technology: I/O8 x CAGE CLAMP®
Connectable conductor materialsCopper
Connection typeInputs/Outputs
Solid conductor0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor0.08 … 2.5 mm² / 28 … 14 AWG
Strip length8 … 9 mm / 0.31 … 0.35 inches
Connection requirement (permissible cable length)350 m
Connection requirement (permissible cable type)2-line, unshielded

Physical data

Width12 mm / 0.472 inches
Height100 mm / 3.937 inches
Depth69.8 mm / 2.748 inches
Depth from upper-edge of DIN-rail62.6 mm / 2.465 inches

Mechanical data

Mounting typeDIN-35 rail
Pluggable connectorPluggable

Material data

Colorlight gray
Housing materialPolycarbonate; polyamide 6.6
Fire load0.827 MJ
Weight53.9 g
Conformity markingCE

Environmental requirements

Ambient temperature (operation)0 … +50 °C
Ambient temperature (storage)-40 … +85 °C
Protection typeIP20
Pollution degree2 per IEC 61131-2
Operating altitude0 … 2000 m / 0 … 6562 ft
Mounting positionHorizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom
Relative humidity (without condensation)95 %
Vibration resistancePer IEC 60068-2-6
Shock resistance15g per IEC 60068-2-27
Exposure to pollutantsPer IEC 60068-2-42 and IEC 60068-2-43
Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 %10 ppm
Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 %25 ppm

Commercial data

PU (SPU)1 pcs
Packaging typebox
Country of originDE
GTIN4055143592307
Customs tariff number85389099990

Product Classification

UNSPSC32151705
eCl@ss 10.027-24-26-08
eCl@ss 9.027-24-26-08
ETIM 9.0EC001604
ETIM 10.0EC001604
ECCNNO US CLASSIFICATION

Environmental Product Compliance

RoHS Compliance StatusCompliant,With Exemption
SCIP notification number (Austria)960fa716-0662-4edc-a613-30a99ad29a5b
SCIP notification number (Belgium)cbd816f9-095d-4915-b0a1-e3c5c7c691aa
SCIP notification number (Bulgaria)a6729924-d605-4485-a7b6-c2a4cb20fb98
SCIP notification number (Czech Republic)3cc98fc4-b2c1-4b0c-b2db-aba6d14d4ec7
SCIP notification number (Denmark)e91aa4d4-d2b4-4334-a5bb-ea6f1b9e5e97
SCIP notification number (Finland)88f822b7-49ad-4632-ae99-ebac97b58d1a
SCIP notification number (France)4e5308ce-7760-4c67-81a7-bd8e9d751712
SCIP notification number (Germany)f6fb02f9-8358-47a8-8851-4a2e1d134651
SCIP notification number (Hungary)82d4ef30-ba2c-4da9-b1dc-4aaf823a170c
SCIP notification number (Italy)00f58d32-02f0-4d94-94df-781567479028
SCIP notification number (Netherlands)fea03748-98d0-4c50-ba31-411e627d660f
SCIP notification number (Poland)6aef7cca-b263-4eb8-867f-39e0148b8323
SCIP notification number (Romania)8c512ac3-6f09-4803-a330-93e1ed656e91
SCIP notification number (Sweden)2887a4b5-6c19-47f8-81d4-7852a95980db

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 753-1631”

Your email address will not be published. Required fields are marked *