Fast delivery within 72 Hours
B&R X67AT1402
4 inputs for thermocouple sensorsSensor types J, K, N, R and SAdditional direct raw value measurement for other sensor typesTerminal temperature compensation…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
4 inputs for thermocouple sensorsSensor types J, K, N, R and SAdditional direct raw value measurement for other sensor typesTerminal temperature compensation
The module is a temperature module for type J, K, N, R and S thermocouple sensors. The selected sensor type is used for all 4 inputs.
Specification
| I/O module | 4 inputs for thermocouple sensors |
|---|---|
| B&R ID code | 0x1486 |
| Status indicators | I/O function per channel, supply voltage, bus function |
| Inputs | 4x M12, A-coded |
| I/O power supply | M8, 4-pin |
| X2X Link | M12, B-coded |
| Internal I/O | 2.6 W |
| X2X Link power supply | 0.75 W |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| ATEX | Zone 2, II 3G Ex nA IIA T5 Gc IP67, Ta = 0 – Max. 60°C TÜV 05 ATEX 7201X |
| UL | cULus E115267 Industrial control equipment |
| HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| KC | Yes |
| Nominal voltage | 24 VDC |
| Voltage range | 18 to 30 VDC |
| Integrated protective function | Reverse polarity protection |
| Input | Thermocouple |
| Digital converter resolution | 16-bit |
| Filter time | Configurable between 2 and 20 ms |
| Output format | INT |
| Type J: Fe-CuNi | 0.0024%/°C |
| Type K: NiCr-Ni | 0.0030%/°C |
| Type N: NiCrSi-NiSi | 0.0035%/°C |
| Type S: PtRh10-Pt | 0.0089%/°C |
| Type R: PtRh13-Pt | 0.0079%/°C |
| Terminal temperature | 1 LSB = 0.1°C |
| Raw value | ±65.534 mV |
| Terminal temperature compensation | Using thermocouple connector X67AC9A02 (accessory) |
| Sensor standard | IEC 60584-1 |
| Sensor temperature | 1 LSB = 0.1°C |
| Raw value output with respect to gain | 1 LSB = 1 µV or 2 µV |
| Range undershoot | 0x8001 |
| Range overshoot | 0x7FFF |
| Open circuit | 0x7FFF |
| Open inputs | 0x7FFF |
| General fault | 0x8000 |
| Conversion procedure | Sigma-delta |
| Linearization method | Software |
| Permissible input signal | Short-term ±30 VDC |
| Gain | ±0.040% |
| Max. gain drift | 0.0123%/°C |
| Nonlinearity | <0.002% |
| DC | >70 dB |
| 50 Hz | >70 dB |
| Common-mode range | ±12 VDC |
| Crosstalk between channels | <-70 dB |
| Terminal temperature error | Typ. ±2°C after 10 min. |
| Insulation voltage between channel and bus | 500 Veff |
| Conversion time | 62 ms per channel with 50 Hz filter + 62 ms per cycle for terminal temperature measurement with 50 Hz filter |
| Cutoff frequency | 4 Hz / First-order filter |
| Slope | -20 dB |
| Electrical isolation | Channel isolated from bus Channel not isolated from channel |
| Any | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP67 |
| Operation | -25 to 60°C |
| Derating | – |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Width | 53 mm |
| Height | 85 mm |
| Depth | 42 mm |
| Weight | 205 g |
| M8 | Max. 0.4 Nm |
| M12 | Max. 0.6 Nm |
Reviews
Clear filtersThere are no reviews yet.