Fast delivery within 72 Hours
B&R X67AI4850
4 inputs for potentiometer displacement gauge
The module is a 4-channel analog input module. It is used to evaluate potentiometer displacement gauges.
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
-
Free 30-Day returns
Description
4 inputs for potentiometer displacement gauge
The module is a 4-channel analog input module. It is used to evaluate potentiometer displacement gauges.
Specification
| I/O module |
4 inputs for potentiometer displacement gauge |
|---|---|
| B&R ID code |
0x9957 |
| Status indicators |
Channel status, operating state, module status |
| Module run/error |
Yes, using LED status indicator and software |
| Input |
Yes, using LED status indicator and software |
| X2X Link |
M12, B-coded |
| Inputs |
4x M12, A-coded |
| I/O power supply |
M8, 4-pin |
| Bus |
0.75 W |
| Internal I/O |
2 W |
| CE |
Yes |
| UKCA |
Yes |
| CRA (Cyber Resilience Act) |
In preparation |
| ATEX |
Zone 2, II 3G Ex nA IIA T5 Gc |
| UL |
cULus E115267 |
| HazLoc |
cCSAus 244665 |
| KC |
Yes |
| Nominal voltage |
24 VDC |
| Voltage range |
18 to 30 VDC |
| Integrated protective function |
Reverse polarity protection |
| Short-circuit proof |
Yes |
| Potentiometer supply voltage Upot |
4.5 V / Max. 50 mA |
| Voltage drop for short-circuit protection at 50 mA |
Max. 0.13 VDC |
| Input type |
Single-ended input in the range of 0 to Upot |
| Digital converter resolution |
15-bit |
| Measurement sensor |
0.5 to 10 kΩ, potentiometer |
| Conversion time |
<200 µs for all channels |
| Output format |
INT (16-bit 2s complement) |
| Short-circuit protection Upot |
Yes |
| Influence of cable length |
Twisted and shielded conductors, cable length as short as possible, cable routing separate from load circuits, without intermediate terminal to sensor |
| Common-mode range |
0 to Upot |
| Insulation voltage between input and bus |
500 Veff |
| Quantization; LSB value (14-bit) |
275 µV |
| Conversion procedure |
Sample & Hold |
| Open circuit on GND |
0x7FFF |
| Open circuit on slider |
0x7FFF |
| Open circuit on Upot |
0x0000 |
| Valid range of values |
0x0000 – 0x7FFF |
| Cutoff frequency |
10 kHz |
| Slope |
60 dB/Dec. |
| Electrical isolation |
Bus isolated from analog input |
| Horizontal |
Yes |
| Vertical |
Yes |
| 0 to 2000 m |
No limitation |
| >2000 m |
Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 |
IP67 |
| Operation |
-25 to 60°C |
| Derating |
– |
| Storage |
-40 to 85°C |
| Transport |
-40 to 85°C |
| Width |
53 mm |
| Height |
85 mm |
| Depth |
42 mm |
| Weight |
195 g |
| M8 |
Max. 0.4 Nm |
| M12 |
Max. 0.6 Nm |
Reviews
Clear filtersThere are no reviews yet.