Fast delivery within 72 Hours

Wago 891-8993/105-401

Cable assembly WINSTA® MINI with protection type IP40The WINSTA® MINI cable assembly rated current 10 A provides the foundation for assembly of fine-stranded and solid conductors. Our pluggable instal…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

Cable assembly WINSTA® MINI with protection type IP40The WINSTA® MINI cable assembly rated current 10 A provides the foundation for assembly of fine-stranded and solid conductors. Our pluggable installation connectors with spring pressure connection technology work without screw connections. They allow resource-efficient, error-free installation in numerous applications. For greater protection in electrical installations, the pluggable installation connector is equipped with mechanical protection against mismating. The pluggable installation connector offers protection against contact with wires or tools if they are smaller than 1 mm in accordance with protection type IP40. Thanks to the color coding and mechanical A coding of WINSTA® MINI pluggable installation connectors, you can clearly distinguish different circuits. Thanks to its particularly minimal dimensions, our WINSTA® MINI Pluggable Connection System with Push-in CAGE CLAMP® spring pressure connection technology is specifically suitable in very tight spaces, i.e., for connections when very little room is available. This product meets all the mandatory fire protection requirements of fire class E; as a result it can be used in areas where fire safety is relevant.Fast, error-free assembly thanks to cable assemblies from WAGOThe cable is pre-assembled with a socket and a free end. WINSTA® is the pluggable connection system that is ideally tailored to the strict requirements of electrical installation. It allows error-free installation of cables and components, quickly and reliably. Take advantage of the pluggable version of our maintenance-free spring pressure connection technology too! Plan your installation with with strain relief hosting from WAGO. protection against mismating eliminates errorscompact design for conductors with a cross-section up to 1.5 mm²with A coding for a great number of usesexact dimensionsquick replacement of defective units during ongoing operation

Specification

Notes

NoteCables with a different fire class can be found in the eShop.

Electrical data - Ratings per IEC/EN

Ratings perIEC/EN 60664-1
Nominal voltage (III/3)250 V
Rated impulse withstand voltage (III / 3)4 kV
Rated current10 A
Legend (ratings)(III / 3) ≙ Overvoltage category III / Pollution degree 3
Ratings perIEC/EN 60664-1 / IEC/EN 60664-1 / IEC/EN 60664-1
Overvoltage categoryIII / III / II
Pollution degree3 / 2 / 2
Nominal voltage250 V
Rated impulse withstand voltage4 kV
Rated current10 A

Electrical data - General information

Note on contact resistanceapprox. 1 mΩ of contact resistance approx. 0.25 mΩ contact transition plug/socket

Connection data

Total number of potentials3
PE functionPreceding PE contact
Conductor preparationultrasonically tip-bonded

Connection data - Connection 1

Strip length9 mm / 0.35 inches
Pole number3
Wire cross-section1 mm²
Strip length (outer insulation)40 mm
Connection typeSocket - Free end

Physical data

Pin spacing4.4 mm / 0.173 inches
Width17.9 mm / 0.705 inches
Height14 mm / 0.551 inches
Total length4 m

Mechanical data

UseGeneral mains applications
CodingA
Variable codingNo
MarkingL ⏚ N
Potential markingL ⏚ N
Mating force of a plug-in connectionapprox. 20 … 70 N (depending on pole number)
Retention force of a plug-in connectionwhen locked: > 80N
Unmating force of a plug-in connectionwhen unlocked: approx. 20 … 70 N (depending on pole number)
Number of mating cycles200, without resistive load
Connection typeSocket - free end
Type of pre-assembled cableConnecting cable
Cable typeH05VV-F 3G1
Protection typeIP40

Plug-in connection

Mismating protectionYes
Note on mismating protectionAll WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while rotated 180 c.) plugging while laterally staggeredd.) plugging one pole
Locking leverCan be retrofitted
Locking of plug-in connectionlocking lever
Note on locking systemAll connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug/socket).

Material data

Note (material data)Information on material specifications can be found here
Colorblack
Insulation material (main housing)Polyamide (PA66)
Flammability class per UL94V0
Fire class per EN 50575Eca
Contact materialCopper or copper alloy; surface-treated
Contact platingTin
Fire load119.767 MJ
Connector colorblack
Strain relief colorblack
Sheathed cable colorblack
Printing color of sheathed cablewhite
Halogen-freeNo
Silicon-freeYes
Sheath materialPVC
Rubber cableNo
Weight300.5 g
Copper weight of the raw cable0.029 kg/m

Environmental requirements

Processing temperature-5 … +40 °C
Continuous operating temperature-35 … +85 °C
Note on continuous operating temperatureCable for temperatures ≤ 70 °C (including halogen-free)Insulating parts for temperatures ≤ 105 °C

Commercial data

PU (SPU)1 pcs
Packaging typeunpacked
Country of originPL
GTIN4055143355261
Customs tariff number85444290900

Product Classification

UNSPSC26121629
eCl@ss 10.027-44-06-04
eCl@ss 9.027-44-06-04
ETIM 9.0EC002587
ETIM 10.0EC002587
ECCNNO US CLASSIFICATION

Environmental Product Compliance

RoHS Compliance StatusCompliant,No Exemption

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 891-8993/105-401”

Your email address will not be published. Required fields are marked *