Fast delivery within 72 Hours

Wago 891-8993/005-102

Cable assembly WINSTA® MINI with strain reliefThe WINSTA® MINI cable assembly with protection type IP20 supports fast, reliable installation. WAGO pluggable installation connectors are used when speci…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

Cable assembly WINSTA® MINI with strain reliefThe WINSTA® MINI cable assembly with protection type IP20 supports fast, reliable installation. WAGO pluggable installation connectors are used when specifications repeat or are distributed on a defined grid, for example for installing grid lighting or flush-mount lighting. For greater security in electrical installations, the pluggable installation connector is provided with mechanical protection against mismating. Standard mains applications for almost any domain of use can be realised with WINSTA® MINI pluggable installation connectors with A coding. WINSTA® MINI follows the trend towards miniaturisation. Our smallest pluggable connection system is primarily suited for lights, for example, since due to LED technology, these offer much less space for the connection technology. This product meets all the mandatory safety requirements of fire class E; thus it can be used in areas where fire safety is relevant.Fast, secure pluggable connections – cable assemblies from WAGOThe cable is pre-assembled with a socket and a plug. The WINSTA® Pluggable Connection System is perfectly tailored to the strict requirements of building installation. It makes electrical installation pluggable, and thus faster, more reliable, and error-free. Use of this pre-assembled system decreases assembly times and installation errors at the construction site. Take advantage of the pluggable version of our maintenance-free spring pressure connection technology too! Plan your installation with with protection type IP20 from WAGO. effective protection against mismatingeasy tool-free operation, a wide range of coding optionswith A coding for a great number of usesready to install and use immediatelyquick replacement of defective units during ongoing operation

Specification

Notes

NoteCables with a different fire class can be found in the eShop.

Electrical data - Ratings per IEC/EN

Ratings perIEC/EN 60664-1
Nominal voltage (III/3)250 V
Rated impulse withstand voltage (III / 3)4 kV
Rated current10 A
Legend (ratings)(III / 3) ≙ Overvoltage category III / Pollution degree 3
Ratings perIEC/EN 60664-1 / IEC/EN 60664-1 / IEC/EN 60664-1
Overvoltage categoryIII / III / II
Pollution degree3 / 2 / 2
Nominal voltage250 V
Rated impulse withstand voltage4 kV
Rated current10 A

Electrical data - General information

Note on contact resistanceapprox. 1 mΩ of contact resistance approx. 0.25 mΩ contact transition plug/socket

Connection data

Total number of potentials3
PE functionPreceding PE contact

Connection data - Connection 1

Pole number3
Wire cross-section1 mm²
Connection typeSocket - Plug

Physical data

Pin spacing4.4 mm / 0.173 inches
Width17.9 mm / 0.705 inches
Height14 mm / 0.551 inches
Total length1 m

Mechanical data

UseGeneral mains applications
CodingA
Variable codingNo
MarkingL ⏚ N
Potential markingL ⏚ N
Mating force of a plug-in connectionapprox. 20 … 70 N (depending on pole number)
Retention force of a plug-in connectionwhen locked: > 80N
Unmating force of a plug-in connectionwhen unlocked: approx. 20 … 70 N (depending on pole number)
Number of mating cycles200, without resistive load
Connection typeSocket - Plug
Type of pre-assembled cableInterconnecting cable
Cable typeH05VV-F 3G1
Protection typeIP20; IP40 when mated

Plug-in connection

Mismating protectionYes
Note on mismating protectionAll WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while rotated 180 c.) plugging while laterally staggeredd.) plugging one pole
Locking leverCan be retrofitted
Locking of plug-in connectionlocking lever
Note on locking systemAll connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug/socket).

Material data

Note (material data)Information on material specifications can be found here
Colorwhite
Insulation material (main housing)Polyamide (PA66)
Fire class per EN 50575Eca
Contact materialCopper or copper alloy; surface-treated
Contact platingTin
Fire load29.973 MJ
Connector colorwhite
Strain relief colorwhite
Sheathed cable colorwhite
Printing color of sheathed cableblack
Halogen-freeNo
Silicon-freeYes
Sheath materialPVC
Rubber cableNo
Weight86.6 g
Copper weight of the raw cable0.029 kg/m

Environmental requirements

Processing temperature-5 … +40 °C
Continuous operating temperature-35 … +85 °C
Note on continuous operating temperatureCable for temperatures ≤ 70 °C (including halogen-free)Insulating parts for temperatures ≤ 105 °C

Commercial data

PU (SPU)1 pcs
Packaging typeunpacked
Country of originPL
GTIN4055143395809
Customs tariff number85444290900

Product Classification

UNSPSC26121629
eCl@ss 10.027-44-06-04
eCl@ss 9.027-44-06-04
ETIM 9.0EC002587
ETIM 10.0EC002587
ECCNNO US CLASSIFICATION

Environmental Product Compliance

RoHS Compliance StatusCompliant,No Exemption

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 891-8993/005-102”

Your email address will not be published. Required fields are marked *