Fast delivery within 72 Hours

Wago 891-8992/206-803

Cable assembly WINSTA® MINI B codingFor power and signal transmission: The WINSTA® MINI cable assembly 2-pole. The pluggable installation connectors with spring pressure connection technology work wit…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

Cable assembly WINSTA® MINI B codingFor power and signal transmission: The WINSTA® MINI cable assembly 2-pole. The pluggable installation connectors with spring pressure connection technology work without screw connections. They allow flexible, error-free installation in a large number of applications. For greater security in electrical installations, the pluggable installation connector is provided with mechanical protection against mismating. Solutions like the WINSTA® MINI pluggable installation connectors with B coding are suitable for applications related to process control, such as for lighting or within data networks. Due to its particularly compact dimensions, our WINSTA® MINI Pluggable Connection System with Push-in CAGE CLAMP® spring pressure connection technology is especially suitable in very tight spaces, i.e., for installations when very little room is available. This product meets all the mandatory safety requirements of fire class E; therefore it can be used in areas where fire safety is relevant.Fast, secure pluggable connections – cable assemblies from WAGOA plug and a free end are available. WINSTA® is the pluggable connection system that is ideally tailored to the strict requirements of electrical installation. It ensures fast, secure and, above all, error-free installation of components and cables. Choose durability and quality – with protection against mismating from WAGO makes the electrical installation of electrical components significantly easier. pluggable installation connectors with protection against mismatingconsistent IP40 protectionwith B coding for controllers such as lighting fixtures and sun blindsexact dimensionsfast, secure installation

Specification

Notes

NoteCables with a different fire class can be found in the eShop.
Variants:Other pole markings, Other versions (or variants) can be requested from WAGO Sales or configured at https://configurator.wago.com/.

Electrical data - Ratings per IEC/EN

Ratings perIEC/EN 60664-1
Nominal voltage (III/3)250 V
Rated impulse withstand voltage (III / 3)4 kV
Rated current16 A
Legend (ratings)(III / 3) ≙ Overvoltage category III / Pollution degree 3
Ratings perIEC/EN 60664-1 / IEC/EN 60664-1 / IEC/EN 60664-1
Overvoltage categoryIII / III / II
Pollution degree3 / 2 / 2
Nominal voltage250 V
Rated impulse withstand voltage4 kV
Rated current16 A

Electrical data - General information

Note on contact resistanceapprox. 1 mΩ of contact resistance approx. 0.25 mΩ contact transition plug/socket

Connection data

Total number of potentials2
Conductor preparationultrasonically tip-bonded

Connection data - Connection 1

Strip length9 mm / 0.35 inches
Pole number2
Wire cross-section1.5 mm²
Strip length (outer insulation)32 mm
Connection typePlug - Free end

Physical data

Pin spacing4.4 mm / 0.173 inches
Width15.6 mm / 0.614 inches
Height13.2 mm / 0.52 inches
Total length8 m

Mechanical data

UseControl technology
CodingB
Variable codingNo
Marking1 2
Potential marking1 2
Mating force of a plug-in connectionapprox. 20 … 70 N (depending on pole number)
Retention force of a plug-in connectionwhen locked: > 80N
Unmating force of a plug-in connectionwhen unlocked: approx. 20 … 70 N (depending on pole number)
Number of mating cycles200, without resistive load
Connection typePlug - Free end
Type of pre-assembled cableConnecting cable
Cable typeControl line 2x1.5
Protection typeIP20; IP40 when mated

Plug-in connection

Mismating protectionYes
Note on mismating protectionAll WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while rotated 180 c.) plugging while laterally staggeredd.) plugging one pole
Locking leverCan be retrofitted
Locking of plug-in connectionlocking lever
Note on locking systemAll connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug/socket).

Material data

Note (material data)Information on material specifications can be found here
Colorgray
Insulation material (main housing)Polyamide (PA66)
Fire class per EN 50575Eca
Contact materialCopper or copper alloy; surface-treated
Contact platingTin
Fire load0.151 MJ
Connector colorgray
Strain relief colorblack
Sheathed cable colorgray
Printing color of sheathed cableblack
Halogen-freeNo
Silicon-freeYes
Sheath materialPVC
Rubber cableNo
Weight524.6 g
Copper weight of the raw cable0.029 kg/m

Environmental requirements

Processing temperature-5 … +40 °C
Continuous operating temperature-35 … +85 °C
Note on continuous operating temperatureCable for temperatures ≤ 70 °C (including halogen-free)Insulating parts for temperatures ≤ 105 °C

Commercial data

Product Group20 (Winsta)
PU (SPU)1 pcs
Packaging typeunpacked
Country of originPL
GTIN4050821873983
Customs tariff number85444290900

Product Classification

UNSPSC26121629
eCl@ss 10.027-44-06-04
eCl@ss 9.027-44-06-04
ETIM 9.0EC002587
ETIM 10.0EC002587
ECCNNO US CLASSIFICATION

Environmental Product Compliance

RoHS Compliance StatusCompliant,No Exemption

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 891-8992/206-803”

Your email address will not be published. Required fields are marked *