Fast delivery within 72 Hours

Wago 750-563

This analog output module generates output currents ranging from 0/4 to 20mA or output voltages in the range from 6 to 18V for the field.Output ranges can be configured via WAGO‐I/O‐CHECK or GSD files…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

This analog output module generates output currents ranging from 0/4 to 20mA or output voltages in the range from 6 to 18V for the field.Output ranges can be configured via WAGO‐I/O‐CHECK or GSD files.The module has two short circuit-proof output channels and enables direct connection of two 2-wire actuators to AO 1 and ground or AO2 and ground. Signals are output via AO 1 or AO 2. In addition, the sense lines from 4-wire actuators can be connected to -Sense AO1 and +Sense AO1 or -Sense AO2 and +Sense AO2.Both output channels have a common ground potential.The output signal is electrically isolated and transmitted with a resolution of 16 bits.Both internal system and field side supply power the module.

Specification

Technical data

Number of analog outputs2
Total number of channels (module)2
Signal typeVoltage, Current
Signal type (current)0 … 20 mADC; 4 … 20 mADC
Signal type (voltage)6 … 18 VDC
Signal type (configurable)yes
Actuator connection2 x (2-wire, 4-wire)
Resolution [bit]16 Bit
Data width2 x 16-bit data; 2 x 8-bit control/status (optional)
Load impedance (voltage output)≥ 1.8 kΩ
Load impedance (current output)≤ 500 Ω
Conversion time (typ.)5 ms
Measurement error (reference temperature)25 °C
Measurement error, deviation (max.) from the upper-range value0.05 %
Output error, deviation (max.) of the upper-range value0.05 %
Temperature coefficient< ±100 ppm
Recovery time (typ.)0.3 ms
Configuration optionsWAGO-I/O-CHECK, CODESYS Library, e!COCKPIT
Supply voltage (system)5 VDC; via data contacts
Current consumption (5 V system supply)95 mA
Supply voltage (field)24 VDC (-15 … +20 %); via power jumper contacts (power supply via blade contact; transmission (field side supply voltage only) via spring contact)
Isolation500 V system/field
IndicatorsLED (A, C) green: Function AO 1, AO 2; LED (B, D) red: Error AO 1, AO 2
Number of incoming power jumper contacts2
Number of outgoing power jumper contacts2
Current carrying capacity (power jumper contacts)10 A

Connection data

Connection technology: I/O8 x CAGE CLAMP®
Connectable conductor materialsCopper
Connection typeInputs/Outputs
Solid conductor0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor0.08 … 2.5 mm² / 28 … 14 AWG
Strip length8 … 9 mm / 0.31 … 0.35 inches

Physical data

Width12 mm / 0.472 inches
Height100 mm / 3.937 inches
Depth69.8 mm / 2.748 inches
Depth from upper-edge of DIN-rail62.6 mm / 2.465 inches

Mechanical data

Mounting typeDIN-35 rail
Pluggable connectorfixed

Material data

Colorlight gray
Housing materialPolycarbonate; polyamide 6.6
Fire load0.712 MJ
Weight51.2 g
Conformity markingCE

Environmental requirements

Ambient temperature (operation)0 … +55 °C
Ambient temperature (storage)-40 … +85 °C
Protection typeIP20
Pollution degree2 per IEC 61131-2
Operating altitude0 … 2000 m / 0 … 6562 ft
Mounting positionHorizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom
Relative humidity (without condensation)95 %
Vibration resistance4g per IEC 60068-2-6
Shock resistance15g per IEC 60068-2-27
EMC immunity to interferenceper EN 61131-2, marine applications
EMC emission of interferenceper EN 61131-2, marine applications
Exposure to pollutantsPer IEC 60068-2-42 and IEC 60068-2-43
Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 %10 ppm
Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 %25 ppm

Commercial data

Product Group15 (I/O System)
PU (SPU)1 pcs
Packaging typebox
Country of originDE
GTIN4045454710323
Customs tariff number85389099990

Product Classification

UNSPSC32101505
eCl@ss 10.027-24-26-01
eCl@ss 9.027-24-26-01
ETIM 9.0EC001596
ETIM 10.0EC001596
ECCNNO US CLASSIFICATION

Environmental Product Compliance

CAS-No.1303-86-2, 1317-36-8, 25550-51-0, 7439-92-1
REACH Candidate List Substance4-Methyl-1,2-cyclohexanedicarboxylic anhydride, Diboron trioxide, Lead, Lead monoxide
RoHS Compliance StatusCompliant,With Exemption
RoHS Exemption6(c), 7(a), 7(c)-I, 7(c)-II
SCIP notification number (Austria)24fb0d81-a166-4ab8-bd19-58418553588c
SCIP notification number (Belgium)879bb2fe-0bfc-45ae-b0d4-4134f4a4b888
SCIP notification number (Bulgaria)e07c18eb-f161-4a83-9a09-e374cef49807
SCIP notification number (Czech Republic)30f196d7-0836-4952-88fe-71857b3234d3
SCIP notification number (Denmark)8240ca2d-3794-4e2a-ad62-158ba42f08b7
SCIP notification number (Finland)2670e615-8282-4b50-bbc1-757a3ed8f3d5
SCIP notification number (France)76638ee7-4da2-4f0c-b485-bb4b29e61539
SCIP notification number (Germany)380f63d7-40fa-4e2d-9df6-d66377ba4aa1
SCIP notification number (Hungary)63db4831-580f-42d9-b810-78e631988035
SCIP notification number (Italy)7a3176e6-ac9e-4688-8dbd-e7b17421c0dd
SCIP notification number (Netherlands)d04fe85c-cd35-4890-8e1c-35c0f66bf83a
SCIP notification number (Poland)7ef5049a-e27c-4af0-a2d8-870c749fdc74
SCIP notification number (Romania)a2d2843c-4c16-41ed-81ff-f719a4daca11
SCIP notification number (Sweden)7e617b6a-c9fb-4a41-b8a8-5af9174f4d55

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 750-563”

Your email address will not be published. Required fields are marked *