Fast delivery within 72 Hours

B&R X67IF1121-1

RS232 and RS485/RS422 usable in parallel2 digital channels, configurable as inputs or outputs2 digital inputsConnection of barcode readers, ID systems and sensors on one module…

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

2-3 Days

From $20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From $40

  • Warranty 1 year
  • Free 30-Day returns

Description

RS232 and RS485/RS422 usable in parallel2 digital channels, configurable as inputs or outputs2 digital inputsConnection of barcode readers, ID systems and sensors on one module

Serial interfaces (barcode scanners for example) are often scattered throughout systems. This interface module from the remote X67 system is the optimal choice for this area of application: RS232 and RS485/RS422 connection options directly where they are needed, distributed on the machine or system.In addition, there are digital inputs and outputs on the same module so that corresponding 24 V sensors/actuators can also be connected.

Specification

Communication module

1x RS232 or 1x RS485/RS422, 2 digital inputs, 2 digital channels configurable as inputs or outputs using software

Insulation voltage between channel and bus

500 Veff

B&R ID code

0xA90F

Sensor/Actuator power supply

Max. 12 W

Status indicators

RS232, RS485/RS422, I/O function per channel, supply voltage, bus function

Outputs

Yes, using LED status indicator and software

I/O power supply

M8, 4-pin

RS232

Yes, using LED status indicator

RS485/RS422

Yes, using LED status indicator

Interfaces and inputs/outputs

4x M12, A-coded

Internal I/O

2.4 W

CE

Yes

UKCA

Yes

CRA (Cyber Resilience Act)

In preparation

ATEX

Zone 2, II 3G Ex nA IIA T5 Gc
IP67, Ta = 0 – Max. 60°C
TÜV 05 ATEX 7201X

UL

cULus E115267
Industrial control equipment

HazLoc

cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5

KC

Yes

Signal

RS485/RS422

Max. distance

1200 m

Transfer rate

Max. 115.2 kbit/s

FIFO buffer

Software

Handshake lines

No

Terminating resistor

Integrated in module

Nominal voltage

24 VDC

Voltage range

18 to 30 VDC

Integrated protective function

Reverse polarity protection

Voltage

I/O power supply minus voltage drop for short-circuit protection

Voltage drop for short-circuit protection at 0.5 A

Max. 2 VDC

Summation current

Max. 0.5 A

Short-circuit proof

Yes

Quantity

Up to 2 if the 2 digital channels are used as digital outputs

Input characteristics per EN 61131-2

Type 1

Input voltage

18 to 30 VDC

Input current at 24 VDC

Typ. 3.5 mA

Input circuit

Sink

Hardware

≤100 µs

Software

Default 0 ms, configurable between 0 and 25 ms in 0.2 ms intervals

Input resistance

Typ. 6.67 kΩ

Low

<5 V

High

>15 VDC

Variant

Current-sourcing FET

Switching voltage

I/O power supply minus residual voltage

Nominal output current

0.5 A

Total nominal current

1 A

Output circuit

Source

Output protection

Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads, reverse polarity protection of the output power supply

Diagnostic status

Output monitoring with 10 ms delay

Leakage current when the output is switched off

<120 μA

Peak short-circuit current

<2.1 A

Switch-on in the event of overload shutdown or short-circuit shutdown

Approx. 1 ms (depends on the module temperature)

0 → 1

<100 μs

1 → 0

<150 μs

Resistive load

Max. 1000 Hz

Inductive load

See section "Switching inductive loads".

Braking voltage when switching off inductive loads

Typ. 68 VDC

Electrical isolation

Bus isolated from channel and IF

Channel not isolated from channel and IF

Any

Yes

0 to 2000 m

No limitation

>2000 m

Reduction of ambient temperature by 0.5°C per 100 m

Degree of protection per EN 60529

IP67

Operation

-25 to 60°C

Derating

Storage

-40 to 85°C

Transport

-40 to 85°C

Width

53 mm

Height

85 mm

Depth

42 mm

Weight

195 g

M8

Max. 0.4 Nm

M12

Max. 0.6 Nm

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “B&R X67IF1121-1”

Your email address will not be published. Required fields are marked *