Fast delivery within 72 Hours
B&R X67AO1223
4 analog outputs ±10 VIntegrated enable relay for initial phaseVery short cycle timesOptimal shield grounding on all channels
The module is equipped with 4…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
4 analog outputs ±10 VIntegrated enable relay for initial phaseVery short cycle timesOptimal shield grounding on all channels
The module is equipped with 4 inputs with 12-bit digital converter resolution. The output signal range is ±10 V.
Specification
| I/O module | 4 analog outputs ±10 V |
|---|---|
| B&R ID code | 0x16F3 |
| Status indicators | I/O function per channel, supply voltage, bus function |
| I/O power supply | M8, 4-pin |
| X2X Link | M12, B-coded |
| Outputs | 4x M12, A-coded |
| Internal I/O | 4 W |
| X2X Link power supply | 0.75 W |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| ATEX | Zone 2, II 3G Ex nA IIA T5 Gc IP67, Ta = 0 – Max. 60°C TÜV 05 ATEX 7201X |
| UL | cULus E115267 Industrial control equipment |
| HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| KC | Yes |
| Nominal voltage | 24 VDC |
| Voltage range | 18 to 30 VDC |
| Integrated protective function | Reverse polarity protection |
| Actuator power supply | Max. 12 W |
| Output | ±10 V |
| Digital converter resolution | 12-bit |
| Conversion time | 400 µs for all outputs |
| Settling time on output change over entire range | Approx. 1 ms |
| Switch on/off behavior | Internal enable relay for startup and errors |
| Output protection | Protection against wiring with supply voltage, short-circuit proof |
| Output format | Example: INT 0x8001 – 0x7FFF / 1 LSB = 0x0010 = 4.882 mV |
| Load per channel | Max. ±10 mA, load ≥ 1 kΩ |
| Output filter | First-order low-pass filter / cutoff frequency 2.5 kHz |
| Max. gain drift | 0.012%/°C |
| Max. offset drift | 0.015%/°C |
| Error caused by load change | Max. 0.01%, from 10 MΩ → 1 kΩ, resistive |
| Nonlinearity | <0.15% |
| Insulation voltage between channel and bus | 500 Veff |
| Output response when the power supply is switched on/off | An enable relay is switched on at a defined value ≠ 0, default setting = 10 kΩ to GND |
| Current limiting | ±40 mA |
| To actuator or I/O power supply | Yes |
| To GND | Yes |
| Gain | 0.15% |
| Offset | 0.05% |
| Voltage | I/O power supply minus voltage drop for short-circuit protection |
| Voltage drop for short-circuit protection at 500 mA | Max. 2 VDC |
| Summation current | Max. 0.5 A |
| Short-circuit proof | Yes |
| Electrical isolation | Channel isolated from bus Channel not isolated from channel |
| Any | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP67 |
| Operation | -25 to 60°C |
| Derating | – |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Width | 53 mm |
| Height | 85 mm |
| Depth | 42 mm |
| Weight | 190 g |
| M8 | Max. 0.4 Nm |
| M12 | Max. 0.6 Nm |
Reviews
Clear filtersThere are no reviews yet.