Fast delivery within 72 Hours

B&R 8V1320.001-2

Modular mechanical design using plug-in modulesIntegrated line filterIntegrated or optional external braking resistorAll connections are made using plug-in connectorsIntegrated electronic restart inhi…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

Modular mechanical design using plug-in modulesIntegrated line filterIntegrated or optional external braking resistorAll connections are made using plug-in connectorsIntegrated electronic restart inhibitPartially-coated circuit boards – more robust in regard to environmental influences (8Vxxxx.001-2)

ACOPOS servo drive, 3x 400-480 V, 34 A, 16 kW, coated, integrated line filter, braking resistor, DC bus power supply unit and electronic safe restart interlock

Specification

NoteVariant with partially coated printed circuit boards
B&R ID code0xA001
Slots for plug-in modules4
CEYes
UKCAYes
CRA (Cyber Resilience Act)Evaluation ongoing
Functional safetyYes
ULcULus E225616Power conversion equipment
KCYes
Permissible network configurationsTT, TN
Mains input voltage3x 400 VAC to 480 VAC ±10%
Frequency50 / 60 Hz ±4%
Installed loadMax. 30 kVA
Inrush current at 400 VAC13 A
Switch-on interval>10 s
Integrated line filter per EN 61800-3, category C3Yes
Power dissipation at device nominal power without braking resistorApprox. 800 W
DC bus capacitance1645 µF
Input voltage24 VDC +25% / -20%
Input capacitance40,000 µF
Mains input voltage applied22 to 24 VDC
Mains input voltage not applied16.7 to 30 VDC
Switch-on voltage455 VDC
Output currentMax. 0.5 A
Quantity2
Continuous current34 Aeff
Switching frequency 5 kHzNo reduction
Switching frequency 10 kHzNo reduction
Switching frequency 20 kHz0.61 Aeff per °C (starting at 25°C)
Starting at 500 m above sea level3.4 Aeff per 1000 m
Peak current80 Aeff
Nominal switching frequency10 kHz
Possible switching frequencies5 / 10 / 20 kHz
Insulation stress of the connected motor per IEC TS 60034-25:2004Limit value curve A
Max. motor line length25 m
Overload protectionYes
Short-circuit and ground fault protectionYes
Max. output frequency598 Hz
With wire end sleeve0.5 to 6 mm²
UL/C-UL-US20 to 8 AWG
CSA20 to 8 AWG
Response threshold for open-circuit monitoringApprox. 250 mA
Max. output current1.5 A
Max. number of switching cyclesUnlimited since implemented electronically
Peak power int./ext.14 / 40 kW
Continuous power int./ext.0.4 / 8 kW
Minimum braking resistance (ext.)15 Ω
Rated current of built-in fuse12 A (fast-acting)
CircuitSink
Input - ACOPOSYes
Input - InputNo
Nominal5 to 40°C
Maximum55°C
Low<5 V
High>15 V
Input current at nominal voltageApprox. 10 mA
Switching delayMax. 2.0 ms
Modulation compared to ground potentialMax. ±38 V
Enable 0 → 1, ready for PWMMax. 100 µs
Enable 1 → 0, PWM offMax. 2.0 ms
OSSD signal connectionsNot permitted
Rising edge52 µs ±0.5 µs (digitally filtered)
Falling edge53 µs ±0.5 µs (digitally filtered)
Discharge capacitance3.1 µF
Power dissipation relative to continuous apparent powerIE2 (10,25) 1% IE2 (50,25) 1.1% IE2 (10,50) 1.2% IE2 (50,50) 1.4% IE2 (90,50) 1.5% IE2 (10,100) 2% IE2 (50,100) 2.3% IE2 (90,100) 2.8%
Nominal losses in standby mode31.8 W
Hanging verticallyYes
Horizontal, face upYes
Standing horizontallyNo
Pollution degree per EN 61800-5-12 (non-conductive pollution)
Overvoltage category per EN 61800-5-1II
Degree of protection per EN 60529IP20
Storage5 to 95%
TransportMax. 95% at 40°C
Operation5 to 85%
Width200 mm
Height375 mm
Depth234 mm
Weight10.6 kg

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “B&R 8V1320.001-2”

Your email address will not be published. Required fields are marked *