Fast delivery within 72 Hours
B&R 80MPF5.500D114-01
2-phase hybrid stepper motor, 60 mm flange, length 183.8 mm, ABR 24 VDC, 5 A parallel, brake 2 Nm, 3.5 Nm holding torque, 2.5 Nm stall torque
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
2-phase hybrid stepper motor, 60 mm flange, length 183.8 mm, ABR 24 VDC, 5 A parallel, brake 2 Nm, 3.5 Nm holding torque, 2.5 Nm stall torque
Specification
| Stepper motor | Stepper motor flange size 60 mm, length 184.4 mm, incremental encoder and brake |
|---|---|
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | Not applicable |
| Wiring | Parallel |
| Current | 5 A |
| Resistance/Phase | 0.6 Ω |
| Inductance/Phase | 2.8 mH |
| Stall torque | 2.5 Nm |
| Holding torque | 3.5 Nm |
| Detent torque | <75 mNm |
| Rotor inertia | 920 gcm2 |
| Stepping angle | 1.8° |
| Max. surface temperature | 90°C |
| Average period of operation between failures | 21,000 hours |
| Shaft type | Flat-sided shaft (D-cut) |
| Insulation class | B (130°C) |
| Insulation resistance | 100 MΩ min. 500 VDC |
| Dielectric resistance | 500 VAC for 1 minute |
| Driver supply voltage | Max. 80 VDC |
| Degree of protection per EN 60529 | IP65 |
| Operation | 5 to 95%, non-condensing |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
| Number of outputs | 3 A / B / R |
| Resolution | 1024 increments per revolution |
| Output circuit | Push/Pull level, asymmetrical |
| Output protection | Protection against short circuit |
| Current consumption | Max. 12 mA + Output load |
| Supply voltage | 24 VDC +6%/-10% |
| Max. output current | ±10 mA per output |
| Braking torque | 2 Nm / 1.5 Nm / 1.8 Nm |
| Coil resistance | 52.36 Ω ±7% |
| Inductance | 0.7 H |
| Power consumption | Typ. 11 W |
| Connection time | 6 ms |
| Response delay | 2 ms |
| Cutoff time | 25 ms |
| Max. radial load | 75 N |
| Max. axial load | The permissible axial load is not permitted to be greater than the motor mass. |
| Weight | 1,800 g |
| Length | 184.4 mm |
Reviews
Clear filtersThere are no reviews yet.