Fast delivery within 72 Hours
Beckhoff EJ5002
The EtherCAT plug-in module EJ5002 is an SSI master and allows the direct connection of two absolute encoders with SSI (synchronous serial interface) via the signal distribution board. Both singleturn…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
The EtherCAT plug-in module EJ5002 is an SSI master and allows the direct connection of two absolute encoders with SSI (synchronous serial interface) via the signal distribution board. Both singleturn and multiturn encoders are supported. The 24 V supply
Specification
| Technology | SSI encoder interface |
|---|---|
| Number Of Channels | 2 |
| Encoder Connection | D+, D-, Cl+, Cl- |
| Encoder Operating Voltage | external |
| Supply Voltage Electronics | 24 V DC (via signal distribution board) |
| Current Consumption | typ. 20 mA + load |
| Current Consumption E Bus | typ. 120 mA |
| Data Transfer Rates | variable up to 1 MHz, 250 kHz default |
| Serial Input | variable up to 32 bit, 24 bit default |
| Data Direction | read |
| Distributed Clocks | yes |
| Signal Input (Data) | difference signal (RS422) |
| Signal Output (Pulse) | difference signal (RS422) |
| Electrical Isolation | 500 V (E-bus/field potential) |
| Special Features | adjustable baud rate, coding and data length, activatable power fail bit |
| Weight | approx. 30 g |
| Operating Temperature | -25…+60°C |
| Storage Temperature | -40…+85°C |
| Relative Humidity | 95%, no condensation |
| Vibration/Shock Resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| Emc Immunity/Emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. Rating/Installation Pos. | IP20/see documentation |
| Approvals/Markings | CE, UL |
| Design Form | EtherCAT I/O plug-in module |
| Material | polycarbonate |
| Installation | on signal distribution board |
| Mechanical Coding | EJ plug-in module: signal-specific coding pins on the housing, signal distribution board: holes in the printed circuit board |
| Position Of The Coding Pins | 2, 5 |
| Locking | latching lug in circuit board cut-out |
| Connection Method | field wiring: application-specific wiring level on the signal distribution board, EJ plug-in module: 2 x 20-pin socket strip |
| Dimensions (W X H X D) | 12 mm x 66 mm x 55 mm |
Reviews
Clear filtersThere are no reviews yet.