Fast delivery within 72 Hours
Beckhoff EJ2522
The EJ2522 incremental encoder simulation module (pulse train) outputs a frequency-modulable signal on two channels with four outputs. The signal can be used to control motor drivers or other signal r…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
The EJ2522 incremental encoder simulation module (pulse train) outputs a frequency-modulable signal on two channels with four outputs. The signal can be used to control motor drivers or other signal receivers, which are controlled by single cycles. The
Specification
| Power Supply | 24 V (-15%/+20%) |
|---|---|
| Number Of Outputs | 2 channel A/B, 1 channel A/B/C (4 differential outputs) |
| Input Specification | – |
| Output Specification | RS422, differential, 50 mA, min. 120 Ω load |
| Load Type | ohmic, min. 220 Ω |
| Distributed Clocks | yes |
| Max. Output Current | RS422 specification, 50 mA |
| Short Circuit Current | short-circuit proof |
| Base Frequency | 0…4 MHz, 50 kHz default |
| Resolution | 16 bit (incl. sign, scaled via the set frequency range) |
| Step Size | min. 10 ns (internal) |
| Auxiliary Power Current | typ. 50 mA (load dependent) |
| Current Consumption E Bus | typ. 180 mA |
| Electrical Isolation | 500 V (E-bus/field potential) |
| Special Features | ABC incremental encoder simulation with connection to TwinCAT NC |
| Weight | approx. 50 g |
| Operating Temperature | -25…+60°C |
| Storage Temperature | -40…+85°C |
| Relative Humidity | 95%, no condensation |
| Emc Immunity/Emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Vibration/Shock Resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| Protect. Rating/Installation Pos. | IP20/see documentation |
| Approvals/Markings | CE |
| Design Form | EtherCAT I/O plug-in module |
| Material | polycarbonate |
| Installation | on signal distribution board |
| Mechanical Coding | EJ plug-in module: signal-specific coding pins on the housing, signal distribution board: holes in the printed circuit board |
| Position Of The Coding Pins | 1, 4 |
| Locking | latching lug in circuit board cut-out |
| Connection Method | field wiring: application-specific wiring level on the signal distribution board, EJ plug-in module: 2 x 20-pin socket strip |
| Dimensions (W X H X D) | 24 mm x 66 mm x 55 mm |
Reviews
Clear filtersThere are no reviews yet.