Fast delivery within 72 Hours
Beckhoff EJ2502
The EJ2502 EtherCAT plug-in module modulates the pulse width of a binary signal and outputs it electrically isolated from the E-bus. The mark/space ratio is preset by a 16-bit value from the automatio…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
The EJ2502 EtherCAT plug-in module modulates the pulse width of a binary signal and outputs it electrically isolated from the E-bus. The mark/space ratio is preset by a 16-bit value from the automation device. The output stage is protected against
Specification
| Power Supply | via the E-bus |
|---|---|
| Number Of Outputs | 2 |
| Rated Load Voltage | 24 V DC (-15%/+20%) |
| Load Type | ohmic, inductive, lamp load |
| Distributed Clocks | – |
| Max. Output Current | 0.5 A (short-circuit proof) per channel |
| Short Circuit Current | typ. 1.5 A |
| Base Frequency | 1…20 kHz, 250 Hz default |
| Duty Factor | 0…100% |
| Resolution | 9…15 bit |
| Reverse Voltage Protection | yes |
| Switching Times | TON: > 750 ns, TOFF: > 500 ns |
| Auxiliary Power Current | typ. 10 mA + load |
| Current Consumption E Bus | typ. 110 mA |
| Electrical Isolation | 500 V (E-bus/field potential) |
| Special Features | separate frequency can be set for each channel |
| Weight | approx. 30 g |
| Operating Temperature | -25…+60°C |
| Storage Temperature | -40…+85°C |
| Relative Humidity | 95%, no condensation |
| Emc Immunity/Emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Vibration/Shock Resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| Protect. Rating/Installation Pos. | IP20/see documentation |
| Approvals/Markings | CE, UL |
| Design Form | EtherCAT I/O plug-in module |
| Material | polycarbonate |
| Installation | on signal distribution board |
| Mechanical Coding | EJ plug-in module: signal-specific coding pins on the housing, signal distribution board: holes in the printed circuit board |
| Position Of The Coding Pins | 1, 4 |
| Locking | latching lug in circuit board cut-out |
| Connection Method | field wiring: application-specific wiring level on the signal distribution board, EJ plug-in module: 2 x 20-pin socket strip |
| Dimensions (W X H X D) | 12 mm x 66 mm x 55 mm |
Reviews
Clear filtersThere are no reviews yet.