Fast delivery within 72 Hours

Wago 821-512

Control Signal Terminal Strips per ยง 14a EnWG Due to the Energy Industry Act (EnWG), system operators whose connection power is greater than 4.2 kW (usually wallboxes or heat pumps for private househo…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From โ‚ฌ20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From โ‚ฌ40

  • Warranty 1 year
  • Free 30-Day returns

Description

Control Signal Terminal Strips per ยง 14a EnWG Due to the Energy Industry Act (EnWG), system operators whose connection power is greater than 4.2 kW (usually wallboxes or heat pumps for private households) are obligated to install throttle devices that can be controlled by the grid operator in an emergency to ensure grid stability in the event of excessive power consumption. For this purpose, WAGO offers the Control Signal Terminal Strips according to ยง 14a EnWG as an interface between consumers and grid operators, which were developed in cooperation with grid operators according to the valid TABs. They offer the advantages of a uniform structure, standards and meet the requirements for clear separation of load and control current.These sets are delivered ready for installation and without a DIN-rail for the end user. They are developed for the German energy market.

Specification

Notes

NoteSet will be delivered without DIN-rail.

Electrical data - Ratings per IEC/EN

Ratings perIEC/EN 60664-1
Nominal voltage (III/3)400 V
Rated impulse withstand voltage (III / 3)6 kV
Rated current16 A
Ratings perIEC/EN 60664-1 / IEC/EN 60664-1 / IEC/EN 60664-1
Overvoltage categoryIII / III / II
Pollution degree3 / 2 / 2
Nominal voltage400 V
Rated impulse withstand voltage6 kV
Rated current16 A

Electrical data - Power Loss

Power loss, per pole (potential)0.341 W
Rated current I<sub>N</sub> for power loss specification16 A
Resistance value for specified, current-dependent power loss0.001 ฮฉ

Electrical data - General information

Wiring directionFront-entry wiring

Connection data

Clamping units12
Total number of potentials6
Number of levels1
Number of jumper slots2

Connection data - Connection 1

Connection technologyPush-in CAGE CLAMPยฎ
Actuation typePush-button
Connectable conductor materialsCopper
Nominal cross-section2.5 mmยฒ
Solid conductor0.25 โ€ฆ 4 mmยฒ / 22 โ€ฆ 12 AWG
Solid conductor; push-in termination0.75 โ€ฆ 4 mmยฒ / 18 โ€ฆ 12 AWG
Stranded conductor0.25 โ€ฆ 4 mmยฒ / 22 โ€ฆ 12 AWG
Fine-stranded conductor0.25 โ€ฆ 4 mmยฒ / 22 โ€ฆ 12 AWG
Fine-stranded conductor; with insulated ferrule0.25 โ€ฆ 2.5 mmยฒ / 22 โ€ฆ 14 AWG
Fine-stranded conductor; with ferrule; push-in termination1 โ€ฆ 2.5 mmยฒ / 18 โ€ฆ 14 AWG
Note (conductor cross-section)Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
Strip length10 โ€ฆ 12 mm / 0.39 โ€ฆ 0.47 inches
Wiring directionFront-entry wiring

Physical data

Width64.7 mm / 2.547 inches
Height85 mm / 3.346 inches
Depth57 mm / 2.244 inches

Mechanical data

Mounting typeDIN-35 rail

Material data

Note (material data)Information on material specifications can be found here
Material groupI
Insulation material (main housing)Polyamide (PA66)
Flammability class per UL94V0
Fire load1.816 MJ
Weight83.9 g

Environmental requirements

Processing temperature-35 โ€ฆ +85 ยฐC
Continuous operating temperature-60 โ€ฆ +105 ยฐC

Commercial data

PU (SPU)1 pcs
Packaging typeBox
Country of originDE
GTIN4066966795912
Customs tariff number85369010000

Product Classification

ETIM 9.0EC000902
ETIM 10.0EC000902
ECCNNO US CLASSIFICATION

Environmental Product Compliance

RoHS Compliance StatusCompliant,No Exemption

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 821-512”

Your email address will not be published. Required fields are marked *