Fast delivery within 72 Hours

Wago 753-652

This serial interface module connects RS‐485/-422 or RS-232 C interface devices to the WAGO I/O System 750. It also provides gateways between the serial interface and the fieldbus systems supported by…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

This serial interface module connects RS‐485/-422 or RS-232 C interface devices to the WAGO I/O System 750. It also provides gateways between the serial interface and the fieldbus systems supported by the WAGO I/O System 750. No higher protocol level is required by the module. Communication to the associated fieldbus master is completely transparent, which provides a wide range of applications for the serial interface module. If required, communication protocols can be configured via fieldbus master.The 2560-byte input buffer provides high data baud rates. At lower baud rates, the data received in lower priority tasks is evaluated without data loss.The 512-byte output buffer provides fast transmission of larger data strings.The module can be configured via WAGO-I/O-CHECK or GSD files. Both flexible baud rate and data width selection perfectly adapt to the application.

Specification

Notes

NotePluggable connectors and coding fingers (753 Series) are not included.

Technical data

Signal typeRS-232, RS-422 / RS-485
Transmission rate300 Bd … 115.2 kBd
Bit transferRS-485/-422: ISO 8482 / DIN 66259 - 4; RS-232: EIA/TIA-232-F
Transmission channels1 TxD / 1 RxD, full-duplex, half-duplex
Line lengthRS-485/-422: approx. 1000 m (max.) twisted pair, RS-232: 40 m (max.)
Data width1 x 46/1 x 22/1 x 6-byte input/output (parameterizable), 2-byte control/status
ParityNone/Odd/Even
Number of data bits7/8, adjustable
Number of stop bits1/2, adjustable
Buffer2560-byte input / 512-byte output
Supply voltage (system)5 VDC; via data contacts
Current consumption (5 V system supply)85 mA
Supply voltage (field)24 VDC; via power jumper contacts (power supply via blade contact; transmission (field side supply voltage only) via spring contact)
Isolation500 V system/field
IndicatorsLED (A-H) green/yellow/red: function, transmission status, reception status, error (buffer full), RS … active, flow control active, user LED 1, user LED 0
Number of incoming power jumper contacts2
Number of outgoing power jumper contacts2
Current carrying capacity (power jumper contacts)10 A

Connection data

Connection technology: I/O8 x CAGE CLAMP®
Connectable conductor materialsCopper
Connection typeInputs/Outputs
Solid conductor0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor0.08 … 2.5 mm² / 28 … 14 AWG
Strip length9 … 10 mm / 0.35 … 0.39 inches

Physical data

Width12 mm / 0.472 inches
Height100 mm / 3.937 inches
Depth69 mm / 2.717 inches
Depth from upper-edge of DIN-rail61.8 mm / 2.433 inches

Mechanical data

Mounting typeDIN-35 rail
Pluggable connectorPluggable

Material data

Housing materialPolycarbonate; polyamide 6.6
Fire load0.62 MJ
Weight42.1 g
Conformity markingCE

Environmental requirements

Ambient temperature (operation)0 … +55 °C
Ambient temperature (storage)-40 … +85 °C
Protection typeIP20
Pollution degree2 per IEC 61131-2
Operating altitude0 … 2000 m / 0 … 6562 ft
Mounting positionHorizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom
Relative humidity (without condensation)95 %
Vibration resistance4g per IEC 60068-2-6
Shock resistance15g per IEC 60068-2-27
EMC immunity to interferenceper EN 61131-2, marine applications
EMC emission of interferenceper EN 61131-2, marine applications
Exposure to pollutantsPer IEC 60068-2-42 and IEC 60068-2-43
Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 %10 ppm
Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 %25 ppm

Commercial data

Product Group15 (I/O System)
PU (SPU)1 pcs
Packaging typebox
Country of originDE
GTIN4050821329749
Customs tariff number85389099990

Product Classification

UNSPSC32151705
eCl@ss 10.027-24-26-08
eCl@ss 9.027-24-26-08
ETIM 9.0EC001604
ETIM 10.0EC001604
ECCNNO US CLASSIFICATION

Environmental Product Compliance

CAS-No.1303-86-2, 1317-36-8, 7439-92-1
REACH Candidate List SubstanceDiboron trioxide, Lead, Lead monoxide
RoHS Compliance StatusCompliant,With Exemption
RoHS Exemption7(c)-I, 6(c), 7(a), 7(c)-I, 7(c)-II
SCIP notification number (Austria)4a205749-da77-40cf-b225-1e12ead7dcce
SCIP notification number (Belgium)30261085-e79b-4af3-8992-3694ba69f6f8
SCIP notification number (Bulgaria)e4c530cf-867b-45ae-981a-14117fb069bf
SCIP notification number (Czech Republic)e9774b40-dc6f-404e-95c6-998158c1ef0a
SCIP notification number (Denmark)d6000c86-469a-40ef-9ad3-744bab8e66d2
SCIP notification number (Finland)bc301afa-dd06-4c50-8bbb-39d1d00a200b
SCIP notification number (France)cd5776db-b070-497a-a67c-715319ae5217
SCIP notification number (Germany)7625051d-25f6-424b-8287-9b0a1286412a
SCIP notification number (Hungary)b6c5b920-dd4b-46a6-a15f-5827abb5d1a0
SCIP notification number (Italy)86742c90-c023-4b68-a4a3-acce3494bb33
SCIP notification number (Netherlands)3e8bf8f5-08d5-4a6d-ac26-51d321014bfc
SCIP notification number (Poland)5f8b9846-f8d4-4b07-94a5-151ed22c5717
SCIP notification number (Romania)cfd9c780-7119-47c6-80ac-ac531268373f
SCIP notification number (Sweden)9ea13498-3f54-4fda-badf-8fb93bfafb2d

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 753-652”

Your email address will not be published. Required fields are marked *