Fast delivery within 72 Hours

Wago 750-517/040-000

This digital output module transmits control signals from the automation device to the connected actuators.The internal system voltage triggers the relay.The NO contacts are electrically isolated.The…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

This digital output module transmits control signals from the automation device to the connected actuators.The internal system voltage triggers the relay.The NO contacts are electrically isolated.The state of the relay is indicated by a LED.The device is ideal for operation in extreme environments thanks to:An extended temperature rangeGreater immunity to impulse voltages and electromagnetic interferenceHigher vibration and shock resistance

Specification

Technical data

Number of digital outputs2
Total number of channels (module)2
Signal typeDigital
Actuator connection2 x (1-wire)
Output circuit design2 changeover contacts, Relay
Output characteristicpotential-free
Pull-in time (max.)8 ms
Drop-out time (max.)4 ms
Switching frequency (max.)0.1 Hz; Nominal load
Switching voltage (max.)250 VAC, 300 VDC
Switching current (max.)1 A
Switching current (note)1 A at 250 VAC and 40 VDC; 0.15 A at 300 VDC
Switching voltage (min.)12 V
Switching current (min.)100 mA
Electrical switching operations (min.) (at max. resistive load)1 x 10⁶ switching operations
Mechanical switching operations (min.) (at max. resistive load)5 x 10⁶ switching operations
Output data width (internal) max.2 Bit
Supply voltage (system)5 VDC; via data contacts
Current consumption (5 V system supply)90 mA
Dielectric strength2.5 kVAC / 3.5 kVDC; per EN 60870-2-1
IndicatorsLED (A, E) green: Status relay 1, relay 2
Rated impulse withstand voltage5.0 kV (EN 60870-2-1 / Class VW3); 4.0 kV (UL 508); 6.4 kV (EN 61010-1)
Overvoltage categoryNominal voltage 230 V: III (EN 61010-1 / up to 2.000 m); II (EN 61010-1 / up to 5.000 m)

Connection data

Connection technology: I/O6 x CAGE CLAMP® (outputs)
Connectable conductor materialsCopper
Connection typeOutput
Solid conductor0.25 … 2.5 mm² / 24 … 14 AWG
Fine-stranded conductor0.25 … 2.5 mm² / 24 … 14 AWG
Strip length8 … 9 mm / 0.31 … 0.35 inches

Physical data

Width12 mm / 0.472 inches
Height100 mm / 3.937 inches
Depth67.8 mm / 2.669 inches
Depth from upper-edge of DIN-rail60.6 mm / 2.386 inches

Mechanical data

Mounting typeDIN-35 rail

Material data

Colordark gray
Housing materialPolycarbonate; polyamide 6.6
Fire load1.005 MJ
Weight53.5 g
Conformity markingCE

Environmental requirements

Ambient temperature (operation)-40 … +70 °C
Ambient temperature (storage)-40 … +85 °C
Ambient temperature (installation)-20 … +70 °C
Protection typeIP20
Pollution degree2 (EN 61010-1)
Operating altitudewithout temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); 5000 m (max.)
Mounting positionHorizontal left, horizontal up, vertical top and vertical bottom
Relative humidity (without condensation)95 %
Relative humidity (with condensation)Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E-DIN 40046-721-3 (except for wind-driven precipitation, water and ice formation)
Vibration resistanceAccording to type test for marine classification (ABS, BV, DNV, IACS, LR): acceleration: 5g, IEC 60068-2-6, EN 60870-2-2, IEC 60721-3-1, -3, EN 50155, EN 61373
Shock resistanceper IEC 60068-2-27 (10g/16 ms/half-sine/1,000 shocks; 25g/6 ms/half-sine/1,000 shocks), EN 50155, EN 61373
EMC immunity to interferenceper EN 61000-6-1, -2; EN 61131-2; marine applications; EN 50121-3-2; EN 50121-4, -5; EN 60255-26; EN 60870-2-1; EN 61850-3; IEC 61000-6-5; IEEE 1613; VDEW: 1994
EMC emission of interferenceper EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3, EN 50121-3-2, EN 50121-4, -5
Exposure to pollutantsper IEC 60068-2-42 and IEC 60068-2-43
Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 %10 ppm
Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 %25 ppm

Commercial data

Product Group15 (I/O System)
PU (SPU)1 pcs
Packaging typeBox
Country of originDE
GTIN4050821460244
Customs tariff number85371098990

Product Classification

UNSPSC32101517
eCl@ss 10.027-24-26-04
eCl@ss 9.027-24-26-04
ETIM 9.0EC001599
ETIM 10.0EC001599
ECCNNO US CLASSIFICATION

Environmental Product Compliance

CAS-No.1303-86-2, 1317-36-8, 7439-92-1
REACH Candidate List SubstanceDiboron trioxide, Lead, Lead monoxide, Perfluorobutane sulfonic acid (PFBS) and its salts
RoHS Compliance StatusCompliant,With Exemption
RoHS Exemption6(c), 7(a), 7(c)-I, 7(c)-II
SCIP notification number (Bulgaria)e2594b6e-0dd6-4624-8777-f51f54a97472
SCIP notification number (Czech Republic)c166b752-c47d-48f1-8016-a9e8d653bc9c

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 750-517/040-000”

Your email address will not be published. Required fields are marked *