Fast delivery within 72 Hours
B&R X67IF1121-1
RS232 and RS485/RS422 usable in parallel2 digital channels, configurable as inputs or outputs2 digital inputsConnection of barcode readers, ID systems and sensors on one module…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
RS232 and RS485/RS422 usable in parallel2 digital channels, configurable as inputs or outputs2 digital inputsConnection of barcode readers, ID systems and sensors on one module
Serial interfaces (barcode scanners for example) are often scattered throughout systems. This interface module from the remote X67 system is the optimal choice for this area of application: RS232 and RS485/RS422 connection options directly where they are needed, distributed on the machine or system.In addition, there are digital inputs and outputs on the same module so that corresponding 24 V sensors/actuators can also be connected.
Specification
| Communication module | 1x RS232 or 1x RS485/RS422, 2 digital inputs, 2 digital channels configurable as inputs or outputs using software |
|---|---|
| Insulation voltage between channel and bus | 500 Veff |
| B&R ID code | 0xA90F |
| Sensor/Actuator power supply | Max. 12 W |
| Status indicators | RS232, RS485/RS422, I/O function per channel, supply voltage, bus function |
| Outputs | Yes, using LED status indicator and software |
| I/O power supply | M8, 4-pin |
| RS232 | Yes, using LED status indicator |
| RS485/RS422 | Yes, using LED status indicator |
| X2X Link | M12, B-coded |
| Interfaces and inputs/outputs | 4x M12, A-coded |
| Internal I/O | 2.4 W |
| X2X Link power supply | 0.75 W |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| ATEX | Zone 2, II 3G Ex nA IIA T5 Gc IP67, Ta = 0 – Max. 60°C TÜV 05 ATEX 7201X |
| UL | cULus E115267 Industrial control equipment |
| HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| KC | Yes |
| Signal | RS485/RS422 |
| Max. distance | 1200 m |
| Transfer rate | Max. 115.2 kbit/s |
| FIFO buffer | Software |
| Handshake lines | No |
| Terminating resistor | Integrated in module |
| Nominal voltage | 24 VDC |
| Voltage range | 18 to 30 VDC |
| Integrated protective function | Reverse polarity protection |
| Voltage | I/O power supply minus voltage drop for short-circuit protection |
| Voltage drop for short-circuit protection at 0.5 A | Max. 2 VDC |
| Summation current | Max. 0.5 A |
| Short-circuit proof | Yes |
| Quantity | Up to 2 if the 2 digital channels are used as digital outputs |
| Input characteristics per EN 61131-2 | Type 1 |
| Input voltage | 18 to 30 VDC |
| Input current at 24 VDC | Typ. 3.5 mA |
| Input circuit | Sink |
| Hardware | ≤100 µs |
| Software | Default 0 ms, configurable between 0 and 25 ms in 0.2 ms intervals |
| Input resistance | Typ. 6.67 kΩ |
| Low | <5 V |
| High | >15 VDC |
| Variant | Current-sourcing FET |
| Switching voltage | I/O power supply minus residual voltage |
| Nominal output current | 0.5 A |
| Total nominal current | 1 A |
| Output circuit | Source |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads, reverse polarity protection of the output power supply |
| Diagnostic status | Output monitoring with 10 ms delay |
| Leakage current when the output is switched off | <120 μA |
| Peak short-circuit current | <2.1 A |
| Switch-on in the event of overload shutdown or short-circuit shutdown | Approx. 1 ms (depends on the module temperature) |
| 0 → 1 | <100 μs |
| 1 → 0 | <150 μs |
| Resistive load | Max. 1000 Hz |
| Inductive load | See section “Switching inductive loads”. |
| Braking voltage when switching off inductive loads | Typ. 68 VDC |
| Electrical isolation | Bus isolated from channel and IF Channel not isolated from channel and IF |
| Any | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP67 |
| Operation | -25 to 60°C |
| Derating | – |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Width | 53 mm |
| Height | 85 mm |
| Depth | 42 mm |
| Weight | 195 g |
| M8 | Max. 0.4 Nm |
| M12 | Max. 0.6 Nm |
Reviews
Clear filtersThere are no reviews yet.