Wago 235-404/333-000

PCB terminal block, 235 Series, 0 °conductor entry to boardThis PCB terminal block (item number 235-404/333-000) streamlines wire connections, making them both quick and easy. It offers the flexibility needed for different mounting types. Our PCB terminal block is rated for 320 V and is designed for use with a rated current of up to 17.5 A. As such, it is suitable for high-load applications. Strip lengths must be between 9 mm and 10 mm when connecting conductors to this PCB terminal block. This product incorporates one conductor terminal and utilizes PUSH WIRE®. Our trusted PUSH WIRE® connection offers the fastest method for clamping conductors. It utilizes the conductor’s stiffness to overcome the clamping spring’s contact force. The item’s dimensions are 21.5 x 12.8 x 12.5 mm (width x height x depth). This PCB terminal block is suitable for conductor cross sections ranging from 0.5 mm² to 2.5 mm². It features one level and four clamping points that you can use to connect four potentials / 4 poles. The clamping spring is made of chrome-nickel spring steel (CrNi), the gray housing is made of polyamide (PA66) for insulation, and the contacts are made of electrolytic copper (ECu). The contact surface is coated with tin. This PCB terminal block is operated with an operating tool. The PCB terminal block is designed for THT soldering. The conductor is designed to be inserted at a 0° angle.. The solder pins measure 0.8 x 0.4 mm in cross-section and 3.6 mm in length and are laid out over the entire terminal strip (in-line). There are two solder pins per potential.