Fast delivery within 72 Hours
Keyence LJ-G5001P
Controller, PNP Type. LJ-G5001P. Series: 2D Laser Displacement Sensor. Series code: LJ-G5000 series
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
Controller, PNP Type. LJ-G5001P. Series: 2D Laser Displacement Sensor. Series code: LJ-G5000 series
Specification
| Model Name |
Controller, PNP Type |
|---|---|
| Model Code |
LJ-G5001P |
| Series Title |
2D Laser Displacement Sensor |
| Series Code |
LJ-G5000 series |
| Data Sheet URL | |
| CAD URL |
https://www.keyence.com/products/measure/laser-2d/lj-g/downloads/?mode=cd&modelId=PM_122G51P |
| Manuals URL |
https://www.keyence.com/products/measure/laser-2d/lj-g/downloads/?mode=ma&modelId=PM_122G51P |
| Model |
LJ-G5001P |
| Head compatibility |
Compatible |
| Number of connectable sensors |
2 units max. |
| Display - Minimum display unit |
0.1 µm *1, 0.001 mm2, 0.01° (Inch mode : 0.01 Mil, 0.00001 inch) |
| Display - Maximum display range |
±99999.9 mm, ±999999 mm2, ±99999.9° (Inch mode : ±9999.99 Mil, ±999.999 inch) |
| Input terminal block - Laser remote interlock input |
Non-voltage input |
| Input terminal block - Trigger input |
For sensor head A, voltage input |
| Input terminal block - Timing 1 input |
Voltage input |
| Output terminal block - Analog voltage output |
±10 V x 2 outputs, output impedance: 100 Ω |
| Output terminal block - Total judgment output |
PNP open-collector output |
| Output terminal block - Error output |
PNP open-collector output (N.C.) |
| Output terminal block - Process output |
PNP open-collector output |
| Output terminal block - Trigger input enable output |
For sensor head A, PNP open-collector output |
| Expansion connector - Timing 2 input |
Voltage input |
| Expansion connector - Trigger input |
For sensor head B, voltage input |
| Expansion connector - Program switching input |
Voltage input, 4 inputs |
| Expansion connector - Memory card save input |
Voltage input |
| Expansion connector - Laser-Off input |
For sensor head A/B, voltage input |
| Expansion connector - Judgment/Binary output |
3-level judgment output: OUT1 to OUT8, total judgment outputBinary output: OUT1 to OUT8 measured data output (21 bits)PNP open-collector output*2 |
| Expansion connector - Strobe output |
PNP open-collector output |
| Expansion connector - Trigger input enable output |
For sensor head B, PNP open-collector output |
| Analog RGB monitor output |
SVGA (800 x 600 pixels) |
| RS-232C interface |
Measured data output and control input/output (Maximum baud rate: 115200 bps, selectable) |
| USB interface |
In conformity with USB Revision 2.0 HI-SPEED (USB 1.1 Full-SPEED compatible) |
| Ethernet interface |
100BASE-TX/10BASE-T |
| Memory card |
Compatible with NR-M1G (1 GB). (with FAT32) |
| Major functions |
Sensor heads calculation, Profile adjustment, Filter, Smoothing, Averaging,Position adjustment, OUT name change, Measurement mode selection (Height, position, gap, width, center position, section area, intersection, angle, profile comparison, profile tracking),Scaling, Average, Measurement, Measured value alarm, Tolerance setting, Auto-zero, Storage (data/profile),Memory card saving, Program memory, Trigger mode change, Mutual interference prevention, Measuring range change,Calibration, Laser light adjustment, Sampling time setting, Mask, Profile alarm setting, Inclination adjustment, Height adjustment,Display language switch, Setting support software connection, Trigger pitch/Measuring time display, etc. |
| Rating - Power voltage |
24 VDC ±10 %, Ripple (P-P) 10 % or less |
| Rating - Current consumption |
800 mA or less with 1 sensor head/1 A or less with two sensor heads |
| Environmental resistance - Ambient temperature |
0 to +50 °C 32 to 122 °F |
| Environmental resistance - Relative humidity |
35 to 85 % RH (No condensation) |
| Weight |
Approx. 1,050 g |
Reviews
Clear filtersThere are no reviews yet.