Fast delivery within 72 Hours
B&R X90DSI00.04-00
18 to 30 VDC4 IO-Link devices4 digital channels, can be used as inputs or outputsSensor/actuator power supplyNetTime timestamps: IO-Link dataX2X LinkThe DS option board is an IO-Link master that allow…
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
-
Free 30-Day returns
Description
18 to 30 VDC4 IO-Link devices4 digital channels, can be used as inputs or outputsSensor/actuator power supplyNetTime timestamps: IO-Link dataX2X LinkThe DS option board is an IO-Link master that allows intelligent sensors and actuators to be connected per the IO-Link standard. Communication to the mainboard is made possible via X2X Link.
Specification
| I/O module |
IO-Link master with 4 IO-Link interfaces |
|---|---|
| B&R ID code |
0xF9F7 |
| Status indicators |
– |
| Module run/error |
Yes, using software status |
| Internal I/O |
0.6 W |
| Additional power dissipation caused by actuators (resistive) [W] |
– |
| CE |
Yes |
| UKCA |
Yes |
| CRA (Cyber Resilience Act) |
In preparation |
| Voltage |
I/O power supply minus voltage drop for short-circuit protection |
| Voltage drop for short-circuit protection at 0.3 A |
Max. 0.3 V |
| Power consumption |
Max. 12 W per IO-Link interface |
| Short-circuit proof |
Yes |
| Switch-off delay |
Configurable using software |
| Switch-off duration |
Configurable using software |
| COM1 |
4.8 kbaud |
| COM2 |
38.4 kbaud |
| COM3 |
230.4 kbaud |
| Max. connection capacity |
22 nF (cable + IO-Link device) |
| Max. load |
96 Ω / 250 mA |
| Data format |
1 start bit, 8 data bits, 1 parity bit (even), 1 stop bit |
| Bus level |
24 VDC (active), 0 VDC (resting voltage) |
| Variant |
Bipolar, positive and negative switching |
| Peak short-circuit current |
<1.3 A |
| Residual voltage |
<0.7 VDC at nominal current 0.25 A |
| Switching voltage |
I/O power supply minus voltage drop for short-circuit protection and semiconductor switch |
| Voltage drop on semiconductor switch |
Max. 0.44 VDC at 0.2 A |
| Switching frequency |
Typ. 25 kHz |
| 0 → 1 |
<1 µs |
| 1 → 0 |
<1 µs |
| Switch-on in the event of overload shutdown or short-circuit shutdown |
Configurable with software |
| Nominal voltage |
24 VDC |
| Nominal output current |
0.25 A |
| Total nominal current |
Max. 1 A |
| Output circuit |
Sink or source |
| Switching frequency (resistive load) |
Max. 500 Hz |
| Output protection |
Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads |
| Input characteristics per EN 61131-2 |
Type 1 |
| Hardware |
220 ns |
| Software |
3 µs (without glitch filter) |
| Input circuit |
Sink |
| Input voltage |
24 VDC -15% / +20% |
| Input current at 24 VDC |
Typ. 5.8 mA |
| Input resistance |
Typ. 4.14 kΩ |
| Low |
<5 VDC |
| High |
>15 VDC |
| Electrical isolation |
Bus isolated from IO-Link |
| Any |
Yes |
| Degree of protection per EN 60529 |
Up to IP69K |
| Storage |
5 to 100%, condensing |
| Transport |
5 to 100%, condensing |
| Operation |
5 to 100%, condensing |
| Width |
47 mm |
| Length |
95 mm |
Reviews
Clear filtersThere are no reviews yet.