Fast delivery within 72 Hours
B&R X90AISG0.02-00
9 to 32 VDC2 full-bridge strain gauge inputsData output rate configurable from 2.5 Hz to 7.5 kHzSpecial operating modes (synchronous mode and multisampling)Configurable filter levelThis module is equi…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
9 to 32 VDC2 full-bridge strain gauge inputsData output rate configurable from 2.5 Hz to 7.5 kHzSpecial operating modes (synchronous mode and multisampling)Configurable filter levelThis module is equipped with 2 inputs for evaluating full-bridge strain gauges and works with 4-wire and 6-wire strain gauge load cells. The concept applied by the module requires compensation in the measurement system. This compensation eliminates the absolute uncertainty in the measurement circuit, such as component tolerances, effective bridge voltage or zero offset. The measurement precision refers to the absolute (compensated) value, which will only change as a result of changes in the operating temperature. Communication to the mainboard is made possible via X2X Link.
Specification
| I/O module | 2 full-bridge strain gauge inputs |
|---|---|
| B&R ID code | 0xF79D |
| Status indicators | – |
| UN ECE-R10 | Yes |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| Quantity | 2 |
| Functions | Analog input, 24-bit digital converter resolution |
| Strain gauge factor | 2 to 256 mV/V, configurable using software |
| Connection | 4- or 6-wire connections |
| Input type | Differential, used to evaluate a full-bridge strain gauge |
| Digital converter resolution | 24-bit |
| Conversion time | Depends on the configured data output rate |
| Data output rate | 2.5 to 7,500 samples per second, configurable using software (fDATA) |
| Cutoff frequency | 5 kHz |
| Order | 3 |
| Slope | 60 dB |
| ADC filter characteristics | Sigma-delta, see section “Filter characteristics of the sigma-delta A/D converter” |
| Operating range / Measurement sensor | 85 to 5,000 Ω |
| Influence of cable length | See section “Calculation example”, sensor cable length: Max. 30 m |
| Input protection | RC protection |
| Common-mode range | 0 to 3 VDC Permissible input voltage range (with regard to the electric potential strain gauge GND) on inputs “Input +” and “Input -“ |
| Conversion procedure | Sigma-delta |
| Broken bridge supply line | Value approaching 0 |
| Broken sensor line | Value approaching ±end value (status bit “Line monitoring” is set in register “Module status”) |
| Valid range of values | 0xFF800001 to 0x007FFFFF (-8,388,607 to 8,388,607) |
| Voltage | 5.5 VDC / Max. 65 mA |
| Short-circuit and overload-proof | Yes |
| Voltage drop for short-circuit protection | Max. 0.2 VDC at 65 mA and 25°C |
| 2 mV/V | 1.31 nV |
| 4 mV/V | 2.62 nV |
| 8 mV/V | 5.25 nV |
| 16 mV/V | 10.49 nV |
| 32 mV/V | 20.98 nV |
| 64 mV/V | 41.96 nV |
| 128 mV/V | 83.92 nV |
| 256 mV/V | 167.85 nV |
| Max. gain drift | 12 ppm/°C |
| Max. offset drift | 2 ppm/°C |
| Nonlinearity | <10 ppm |
| Any | Yes |
| Chemical resistance | Not guaranteed |
| Degree of protection per EN 60529 | Up to IP66 |
| Horizontal mounting orientation | -40 to 85°C housing surface |
| Vertical mounting orientation | -40 to 85°C housing surface |
| Storage | 5 to 100%, condensing |
| Transport | 5 to 100%, condensing |
| Operation | For shock test 50 g, 11 ms analog values out of tolerance |
| Width | 47 mm |
| Length | 95 mm |
| M12 | 0.6 Nm |
Reviews
Clear filtersThere are no reviews yet.