Fast delivery within 72 Hours
B&R X67DV1311.L12
Controlling valve manifolds with multi-pin technologyUp to 16 valves per valve manifold16 digital inputs for feedbackSeparate feed for inputs and valve coilsConfigurable digital input filterAll output…
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
-
Free 30-Day returns
Description
Controlling valve manifolds with multi-pin technologyUp to 16 valves per valve manifold16 digital inputs for feedbackSeparate feed for inputs and valve coilsConfigurable digital input filterAll outputs with single channel diagnosticsExtensive additional status information
This module lets you control valve terminals using multi-pin technology. The digital inputs use M12 connectors.
Specification
| I/O module |
16 digital outputs for controlling valve terminals with multi-pin technology |
|---|---|
| Insulation voltage between channel and bus |
500 Veff |
| Nominal voltage |
24 VDC |
| B&R ID code |
0x1AEE |
| Status indicators |
I/O function per digital input, supply voltage, bus function |
| Outputs |
M16, 19-pin |
| I/O power supply |
M8, 4-pin |
| X2X Link |
M12, B-coded |
| Inputs |
8x M12, A-coded |
| Internal I/O |
1.3 W |
| X2X Link power supply |
0.75 W |
| CE |
Yes |
| UKCA |
Yes |
| ATEX |
Zone 2, II 3G Ex nA IIA T5 Gc |
| UL |
cULus E115267 |
| HazLoc |
cCSAus 244665 |
| KC |
Yes |
| Voltage range |
18 to 30 VDC |
| Integrated protection |
Reverse polarity protection |
| Sensor/Actuator power supply |
Max. 12 W |
| Input characteristics per EN 61131-2 |
Type 1 |
| Input voltage |
18 to 30 VDC |
| Input current at 24 VDC |
Typ. 4.4 mA |
| Input circuit |
Sink |
| Hardware |
≤100 μs |
| Software |
Default 0 ms, configurable between 0 and 25 ms in 0.2 ms intervals |
| Input resistance |
Typ. 5 kΩ |
| Sensor power supply |
0.5 A summation current |
| Low |
<5 VDC |
| High |
>15 VDC |
| Variant |
Current-sourcing FET |
| Switching voltage |
I/O power supply minus residual voltage |
| Nominal output current |
0.1 A |
| Total nominal current |
1.6 A |
| Output circuit |
Source |
| Output protection |
Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads, reverse polarity protection of the output power supply |
| Diagnostic status |
Output monitoring with 10 ms delay |
| Leakage current when the output is switched off |
5 µA |
| Switching on after overload shutdown |
Approx. 10 ms (depends on the module temperature) |
| Residual voltage |
<0.1 V at 0.1 A nominal current |
| Peak short-circuit current |
<2 A |
| 0 → 1 |
<100 µs |
| 1 → 0 |
<150 µs |
| Resistive load |
Max. 100 Hz |
| Inductive load |
See "Switching inductive loads" |
| Braking voltage when switching off inductive loads |
52 VDC |
| Voltage |
I/O power supply minus voltage drop for short-circuit protection |
| Voltage drop for short-circuit protection at 500 mA |
Max. 2 VDC |
| Summation current |
Max. 0.5 A |
| Short-circuit proof |
Yes |
| Electrical isolation |
Channel isolated from bus Channel not isolated from channel |
| Any |
Yes |
| 0 to 2000 m |
No limitation |
| >2000 m |
Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 |
IP67 |
| Operation |
-25 to 60°C |
| Derating |
– |
| Storage |
-40 to 85°C |
| Transport |
-40 to 85°C |
| Width |
53 mm |
| Height |
155 mm |
| Depth |
42 mm |
| Weight |
330 g |
| M8 |
Max. 0.4 Nm |
| M12 |
Max. 0.6 Nm |
| M16 |
Max. 1.0 Nm |
Reviews
Clear filtersThere are no reviews yet.