Fast delivery within 72 Hours
B&R X67DS438A
4 IO-Link channels (Port Class A)Each IO-Link channel can be configured as a digital input or output (SIO mode)Additional digital input per IO-Link connection24 VDC and GND for sensor/actuator supplyN…
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
-
Free 30-Day returns
Description
4 IO-Link channels (Port Class A)Each IO-Link channel can be configured as a digital input or output (SIO mode)Additional digital input per IO-Link connection24 VDC and GND for sensor/actuator supplyNetTime timestamps: IO-Link data
The module is an IO-Link master that allows intelligent sensor and actuators to be connected in accordance to the IO-Link standard. The module can be used to operate up to 4 IO-Link devices. All IO-Link channels can also be operated in SIO mode if desired and thus used as digital inputs or outputs. The module also has 4 additional digital inputs, which can be used independent of the IO-Link channel configuration.
Specification
| I/O module |
IO-Link master with 4 IO-Link interfaces |
|---|---|
| B&R ID code |
0xCAAE |
| Status indicators |
IO-Link operating state, bus function, module status |
| Module run/error |
Yes, using LED status indicator and software |
| IO-Link operating state |
Yes, using LED status indicator and software |
| C/Q status |
Yes, using LED status indicator and software |
| I/Q status |
Yes, using software |
| X2X Link |
M12, B-coded |
| Inputs |
M12, A-coded |
| I/O power supply |
M8, 4-pin |
| Cable type |
4-pin sensor cable, unshielded |
| Cable length |
Max. 20 m |
| Line capacitance |
Max. 3 nF |
| Loop resistance |
Max. 6 Ω |
| Internal I/O |
0.5 W |
| X2X Link power supply |
0.75 W |
| Additional power dissipation caused by actuators (resistive) [W] |
– |
| CE |
Yes |
| UKCA |
Yes |
| CRA (Cyber Resilience Act) |
In preparation |
| ATEX |
Zone 2, II 3G Ex nA IIA T5 Gc |
| UL |
cULus E115267 |
| HazLoc |
cCSAus 244665 |
| Nominal voltage |
24 VDC |
| Voltage range |
24 VDC ±25% |
| Integrated protective function |
Reverse polarity protection |
| Voltage |
I/O power supply minus voltage drop for short-circuit protection |
| Voltage drop for short-circuit protection at 0.5 A |
Max. 0.3 V |
| Power consumption |
Max. 12 W per IO-Link interface |
| Short-circuit proof |
Yes |
| Switch-off delay |
Configurable using software |
| Switch-off duration |
Configurable using software |
| COM1 |
4.8 kbaud |
| COM2 |
38.4 kbaud |
| COM3 |
230.4 kbaud |
| Max. connection capacity |
22 nF (cable + IO-Link device) |
| Max. load |
96 Ω / 250 mA |
| Data format |
1 start bit, 8 data bits, 1 parity bit (even), 1 stop bit |
| Bus level |
24 VDC (active), 0 VDC (resting voltage) |
| Variant |
Bipolar, positive and negative switching |
| Peak short-circuit current |
<1.3 A |
| Residual voltage |
<0.7 VDC at nominal current 0.25 A |
| Switching voltage |
I/O power supply minus voltage drop for short-circuit protection and semiconductor switch |
| Voltage drop on semiconductor switch |
Max. 0.5 VDC at 0.25 A |
| 0 → 1 |
<10 µs |
| 1 → 0 |
<10 µs |
| Overcurrent threshold |
Configurable using software |
| Insulation voltage between IO-Link and bus |
500 Veff |
| Nominal output current |
0.25 A |
| Total nominal current |
Max. 1 A |
| Output circuit |
Sink or source |
| Switching frequency (resistive load) |
Max. 500 Hz |
| Output protection |
Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads |
| Hardware |
≤60 µs |
| Input circuit |
Sink |
| Input voltage |
24 VDC -15% / +20% |
| Input current at 24 VDC |
Typ. 3.8 mA |
| Input resistance |
Typ. 6.3 kΩ |
| Low |
<5 VDC |
| High |
>15 VDC |
| Software |
Default 1 ms, configurable between 0 and 25.5 ms |
| Insulation voltage between channel and bus |
500 Veff |
| Electrical isolation |
Bus isolated from IO-Link |
| Any |
Yes |
| 0 to 2000 m |
No limitation |
| >2000 m |
Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 |
IP67 |
| Operation |
5 to 95% |
| Storage |
5 to 95% |
| Transport |
5 to 95% |
| Width |
53 mm |
| Height |
85 mm |
| Depth |
42 mm |
| Weight |
200 g |
| M8 |
Max. 0.4 Nm |
| M12 |
Max. 0.6 Nm |
Reviews
Clear filtersThere are no reviews yet.