Fast delivery within 72 Hours
B&R X20IF1086-2
POWERLINK for real-time Ethernet communication100 Base-FX portPoll response chainingDynamic Node Allocation (DNA)
The interface module is used for applicat…
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
-
Free 30-Day returns
Description
POWERLINK for real-time Ethernet communication100 Base-FX portPoll response chainingDynamic Node Allocation (DNA)
The interface module is used for application-specific expansion of the X20 controllers. It is equipped with a POWERLINK interface.This interface uses a 100 Base-FX port. The POWERLINK connection is made using 62.5/125 μm or 50/125 µm fiber optic multimode cable with a duplex LC connection. The module and network status is indicated using LEDs.
Specification
| Communication module |
1x POWERLINK (V1/V2) managing or controlled node |
|---|---|
| B&R ID code |
0xB455 |
| Status indicators |
Module status, bus function |
| Module status |
Yes, using LED status indicator and software |
| Bus function |
Yes, using LED status indicator and software |
| Power consumption |
1.8 W (rev. <D0: 2 W) |
| Additional power dissipation caused by actuators (resistive) [W] |
– |
| CE |
Yes |
| UKCA |
Yes |
| CRA (Cyber Resilience Act) |
In preparation |
| ATEX |
Zone 2, II 3G Ex nA nC IIA T5 GcIP20, Ta (see X20 user's manual)FTZÚ 09 ATEX 0083X |
| UL |
cULus E115267Industrial control equipment |
| HazLoc |
cCSAus 244665Process control equipmentfor hazardous locations Class I, Division 2, Groups ABCD, T5 |
| CCS |
Yes |
| KC |
Yes |
| Fieldbus |
POWERLINK (V1/V2) managing or controlled node |
| Type |
Type 4 |
| Standard (compliance) |
ANSI/IEEE 802.3 |
| Variant |
1x duplex LC |
| Transfer rate |
100 Mbit/s |
| Physical layer |
100BASE-FX |
| Half-duplex |
Yes |
| Full-duplex |
POWERLINK mode: No / Ethernet mode: Yes |
| Autonegotiation |
No |
| Auto-MDI/MDIX |
No |
| Controller |
POWERLINK MAC |
| Wave length |
Typ. 1300 nmRx range: 1270 to 1380 nmTx range: 1270 to 1380 nm |
| Cable fiber type |
Multimode fiber with 62.5/125 µm or 50/125 µm core diameter LC connector on both sides |
| Glass fiber 62.5/125 µm, NA = 0.275 |
11 dB |
| Glass fiber 50/125 µm, NA = 0.200 |
7.5 dB |
| Ethernet TCP/IP |
Max. 400 m between 2 stations (segment length) |
| POWERLINK |
Max. 2 km between 2 stations (segment length) |
| Electrical isolation |
PLC isolated from POWERLINK (X1) |
| Horizontal |
Yes |
| Vertical |
Yes |
| 0 to 2000 m |
No limitation |
| >2000 m |
Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 |
IP20 |
| Horizontal mounting orientation |
-25 to 60°C |
| Vertical mounting orientation |
-25 to 50°C |
| Derating |
– |
| Storage |
5 to 95%, non-condensing |
| Transport |
5 to 95%, non-condensing |
| Operation |
5 to 95%, non-condensing |
| Slot |
In the X20 PLC |
Reviews
Clear filtersThere are no reviews yet.