Fast delivery within 72 Hours
B&R X20EM1613
Intel Atom 1.3 GHz with integrated I/O processorEthernet, POWERLINK V2 with poll-response chaining, onboard USB and RS4851 slot for modular interface expansion1 GB LPDDR4 SDRAM2 GB onboard flash drive…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
Intel Atom 1.3 GHz with integrated I/O processorEthernet, POWERLINK V2 with poll-response chaining, onboard USB and RS4851 slot for modular interface expansion1 GB LPDDR4 SDRAM2 GB onboard flash driveFanlessNo battery
This compact yet powerful controller is based on Intel Atom processor technology. The fanless, battery-free design of this controller means it is completely maintenance-free.The basic configuration includes USB, Ethernet, POWERLINK V2, RS485 and a flash drive. In addition, 1 slot can be used for X20 interface modules to increase flexibility.
Specification
| Interfaces | 1x RS485, 1x Ethernet (2-port switch), 1x POWERLINK (V2), 2x USB, 1x X2X Link |
|---|---|
| System module | Controller |
| B&R ID code | 0x289C |
| Cooling | Fanless |
| Status indicators | CPU function, Ethernet, POWERLINK, RS485, I/O power supply |
| CPU function | Yes, using LED status indicator |
| Ethernet | Yes, using LED status indicator |
| I/O power supply | Yes, using software and LED status indicator |
| POWERLINK | Yes, using LED status indicator |
| Temperature | Yes, using software register |
| Controller redundancy | No |
| Storage health data support | Yes |
| ACOPOS support | Yes |
| Visual Components support | Yes |
| Power consumption | 5.5 W |
| Power consumption for X2X Link power supply | 0.6 W |
| Internal I/O | 0.56 W |
| Additional power dissipation caused by actuators (resistive) [W] | – |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user’s manual) FTZÚ 09 ATEX 0083X |
| UL | cULus E115267 Industrial control equipment |
| HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| Input voltage | 24 VDC -15% / +20% (nominal voltage: 24 VDC) (max. input power at nominal voltage: 240 W) |
| Input current | Max. 1.4 A at 24 VDC |
| Fuse | Required line fuse: Max. 10 A, slow-blow |
| Reverse polarity protection | Yes |
| Nominal output power | 3.5 W |
| Parallel connection | Yes |
| Redundant operation | Yes |
| Nominal output voltage | 24 VDC |
| Permissible contact load | 10 A |
| Real-time clock | Retention for at least 300 hours, typ. 1000 hours at 25°C, 1 s resolution, <30 s/month accuracy at 25°C |
| FPU | Yes |
| Type | USB 1.1/2.0 |
| Clock frequency | 1.3 GHz |
| Data code | 24 kB |
| Program code | 32 kB |
| L2 cache | 1 MB |
| Integrated I/O processor | Processes I/O data points in the background |
| Modular interface slots | 1 |
| Remanent variables | Max. 64 kB, retention >10 years |
| Shortest task class cycle time | 100 µs |
| Typical instruction cycle time | 0.0015 µs |
| RAM | 1 GB LPDDR4 SDRAM |
| Data retention | 10 years |
| Guaranteed | 40 TB |
| Results for 5 years | 21.9 GB/day |
| Guaranteed erase/write cycles | 20,000 |
| Error-correcting code (ECC) | Yes |
| Signal | RS485 |
| Variant | Connection via 6-pin terminal block |
| Line length | Max. 100 m between 2 stations (segment length) |
| Transfer rate | Max. 115.2 kbit/s |
| Physical layer | 100BASE-TX |
| Half-duplex | Yes |
| Full-duplex | POWERLINK mode: No / Ethernet mode: Yes |
| Autonegotiation | Yes |
| Auto-MDI/MDIX | Yes |
| Fieldbus | X2X Link master |
| Max. output current | 0.5 A |
| Max. distance | 1000 m |
| Terminating resistor | Integrated in PLC, not switchable |
| Electrical isolation | Ethernet (IF2), POWERLINK (IF3), X2X (IF6) and RS485 (IF7) isolated from each other, from other interfaces and from PLC I/O to PLC isolated from all interfaces USB (IF4 and IF5) and slot for X20 interface modules not isolated from PLC |
| Horizontal | Yes |
| Vertical | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.6°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
| Horizontal mounting orientation | -25 to 60°C |
| Vertical mounting orientation | -25 to 50°C |
| Derating | – |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
| Operation | 5 to 95%, non-condensing |
| Note | X20 end cover plate (right) included in delivery 2- and 6-pin terminal block included in delivery Interface module slot cover included in delivery |
| Width | 82.5 mm |
| Height | 124 mm |
| Depth | 92 mm |
| Weight | 530 g |
Reviews
Clear filtersThere are no reviews yet.