Fast delivery within 72 Hours
B&R X20DO4613
4 digital outputsControls external power triacs or non-parallel thyristorsOutputs with 48 – 240 VAC50 Hz or 60 HzOutputs electrically isolated from one anotherPhase-angle controlZero-crossing detectio…
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
-
Free 30-Day returns
Description
4 digital outputsControls external power triacs or non-parallel thyristorsOutputs with 48 – 240 VAC50 Hz or 60 HzOutputs electrically isolated from one anotherPhase-angle controlZero-crossing detectionNegative half-waves can be switched off2-wire connections240 V codingOSP modeFrequency mode
The module is a digital output module that is equipped with 4 opto-triac outputs using phase-angle control. L and N are fed to the module for zero-crossing detection.The 4 outputs are electrically isolated from one another and are used for controlling external power triacs or nonparallel thyristors.
Specification
| I/O module |
4 digital outputs for controlling external power triacs or non-parallel thyristors |
|---|---|
| B&R ID code |
0xAD05 |
| Status indicators |
I/O function per channel, operating state, module status |
| Module run/error |
Yes, using LED status indicator and software |
| Outputs |
Yes, using LED status indicator |
| Bus |
0.8 W |
| Internal I/O |
– |
| External I/O |
– |
| Additional power dissipation caused by actuators (resistive) [W] |
+1 W |
| CE |
Yes |
| UKCA |
Yes |
| CRA (Cyber Resilience Act) |
In preparation |
| ATEX |
Zone 2, II 3G Ex nA nC IIA T5 Gc |
| UL |
cULus E115267 |
| HazLoc |
cCSAus 244665 |
| KC |
Yes |
| Variant |
Opto-triac |
| Circuit |
Normally open contact |
| Nominal voltage |
48 to 240 VAC |
| Max. voltage |
264 VAC |
| Rated frequency |
47 to 63 Hz |
| Nominal output current |
80 mA |
| Total nominal current |
320 mA |
| Output current |
50 mA |
| Summation current |
200 mA |
| Connection type |
2-wire connections |
| Zero-crossing detection |
Yes |
| Holding current |
Max. 3.5 mA |
| Leakage current |
Max. 1.5 mA (per channel) |
| Residual voltage (on-state voltage) |
Max. 3 V |
| Area |
5 to 95% |
| Resolution |
1% |
| Accuracy (60 to 240 VAC) |
<100 μs |
| Voltage monitoring L - N |
No |
| Recommended wiring |
Twisted pair cabling to the terminal pairs |
| Line length |
Max. 10 m |
| Overvoltage protection between L and N |
Yes |
| Channel - Bus |
Tested at 2300 VAC |
| Channel - Channel |
Tested at 2300 VAC |
| External |
Generally fuse |
| Internal |
Snubber circuit (RC element) and varistor |
| Electrical isolation |
Channel isolated from channel, bus and I/O power supply |
| Horizontal |
Yes |
| Vertical |
Yes |
| 0 to 2000 m |
No limitation |
| >2000 m |
Not permitted |
| Degree of protection per EN 60529 |
IP20 |
| Horizontal mounting orientation |
-25 to 60°C |
| Vertical mounting orientation |
-25 to 50°C |
| Derating |
– |
| Storage |
5 to 95%, non-condensing |
| Transport |
5 to 95%, non-condensing |
| Operation |
5 to 95%, non-condensing |
| Note |
Order 1x terminal block X20TB32 separately. |
| Pitch |
12.5+0.2 mm |
Reviews
Clear filtersThere are no reviews yet.