Fast delivery within 72 Hours
B&R X20DO4332-1
4 digital outputs with 2 ASource circuit3-wire connections24 VDC and GND for actuator power supplyIntegrated output protectionOSP modePWM mode
The module i…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
4 digital outputs with 2 ASource circuit3-wire connections24 VDC and GND for actuator power supplyIntegrated output protectionOSP modePWM mode
The module is equipped with 4 outputs with 3-wire connections as well as 24 VDC and GND for the actuator power supply. The outputs are designed for a source circuit. The nominal output current is 2 A.
Specification
| I/O module | 4 digital outputs 24 VDC for 3-wire connections |
|---|---|
| B&R ID code | 0xF5F9 |
| Status indicators | I/O function per channel, operating state, module status |
| Module run/error | Yes, using LED status indicator and software |
| Outputs | Yes, using LED status indicator and software (output error status) |
| Bus | 0.1 W (Rev. <D0: 0.16 W) |
| Internal I/O | 0.49 W |
| Additional power dissipation caused by actuators (resistive) [W] | +1 (Rev. <D0: +1.6) |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| DNV | Temperature: B (0 to 55°C)Humidity: B (up to 100%)Vibration: B (4 g)EMC: B (bridge and open deck) |
| CCS | Yes |
| LR | ENV1 |
| KR | Yes |
| ABS | Yes |
| BV | EC33BTemperature: 5 – 55°CVibration: 4 gEMC: Bridge and open deck |
| Variant | Current-sourcing FET |
| Nominal voltage | 24 VDC |
| Switching voltage | 24 VDC -15% / +20% |
| Nominal output current | 2 A |
| Total nominal current | 8 A |
| Connection type | 3-wire connections |
| Output circuit | Source |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit (see value “Short-circuit peak current”)Internal freewheeling diode for switching inductive loads |
| Actuator power supply | Max. 12 W |
| Diagnostic status | Output monitoring with 10 ms delay |
| Leakage current when the output is switched off | 5 µA |
| RDS(on) | 60 mΩ (Rev. <D0: 100 mΩ) |
| Peak short-circuit current | <4 A |
| Switch-on in the event of overload shutdown or short-circuit shutdown | Approx. 10 ms (depends on the module temperature) |
| 0 → 1 | <300 µs |
| 1 → 0 | <300 µs |
| Resistive load | Max. 500 Hz |
| Braking voltage when switching off inductive loads | 0.6 V |
| Insulation voltage between channel and bus | 500 Veff |
| Additional functions | Outputs can be connected in parallel to increase the output current. |
| Quantity | 4 |
| Nominal current | 2 A |
| PWM frequency | 15.25 to 1000 Hz |
| Configurable dither | 0 to 250 Hz, 1 to 25% of the period duration |
| Period duration resolution | 1000 to 65535 µs in 1 µs steps |
| Voltage | Module power supply minus voltage drop for short-circuit protection |
| Voltage drop for short-circuit protection at 500 mA | Max. 2 V |
| Short-circuit proof | Yes |
| Electrical isolation | Channel isolated from busChannel not isolated from channel and I/O power supply |
| Horizontal | Yes |
| Vertical | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
| Horizontal mounting orientation | -25 to 60°C |
| Vertical mounting orientation | -25 to 50°C |
| Derating | See section “Derating”. |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
| Operation | 5 to 95%, non-condensing |
| Note | Order 1x terminal block X20TB12 separately.Order 1x bus module X20BM11 separately. |
| Pitch | 12.5+0.2 mm |
Reviews
Clear filtersThere are no reviews yet.