Fast delivery within 72 Hours
B&R X20DC2190
Ultrasonic transducer modulePath measurement (resolution 10 µm)Speed measurement (resolution 100 µm/s)1, 2, 3 and 4 magnetic rod measurements possibleDPI/IP protocol supported…
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
-
Free 30-Day returns
Description
Ultrasonic transducer modulePath measurement (resolution 10 µm)Speed measurement (resolution 100 µm/s)1, 2, 3 and 4 magnetic rod measurements possibleDPI/IP protocol supported
This module can be used to determine paths and to calculate speeds at the same time. The ultrasonic transducer rods are connected directly to the RS422 interface. Communication to the transducer rod takes place using start/stop signals. With the DPI/IP protocol, it is also possible, for example, to read operational properties directly from the transducer. During service (when a transducer is being exchanged) the machine can be started again quickly without additional configuration work. The module is designed for connecting 2 transducer rods with a total of up to 4 paths. That means, for example, that 2 ultrasonic transducers with 2 magnets each or one with 4 magnets can be used. The combination 3/1 is also possible. The module provides 24 VDC as an external supply for the sensor.
Specification
| I/O module |
Ultrasonic path measurement module, 2 path measurement rods, 4 path recorders, speed measurement |
|---|---|
| B&R ID code |
0x2188 |
| Status indicators |
I/O function per channel, operating state, module status |
| Module run/error |
Yes, using LED status indicator and software |
| Bus |
0.01 W |
| Internal I/O |
1.1 W |
| Additional power dissipation caused by actuators (resistive) [W] |
– |
| CE |
Yes |
| UKCA |
Yes |
| CRA (Cyber Resilience Act) |
In preparation |
| ATEX |
Zone 2, II 3G Ex nA nC IIA T5 Gc |
| UL |
cULus E115267 |
| HazLoc |
cCSAus 244665 |
| KC |
Yes |
| Quantity |
2 |
| Supported encoder types |
Start/Stop interface |
| Voltage |
24 VDC, module-internal, max. 150 mA |
| Monitoring |
Configurable overvoltage/undervoltage monitoring (±10%, ±15%, ±20%, ±25%) |
| Short-circuit proof |
Rev. D0 and later |
| Input and output level |
RS422 differential level |
| Multi-magnet measurement |
Yes, in combination per rod, max. 4 magnets total |
| Outputs |
1.6 µs durational initialization pulse |
| Path measurement |
Resolution = 0.01 mm, measurement range = ±5.2 m |
| Speed measurement |
Resolution = 0.1 mm/s, measurement range = ±3.2 m/s |
| Accuracy |
±50 ppm ±5 ppm/year |
| Short-circuit protection |
No |
| Electrical isolation |
Channel isolated from bus Channel not isolated from channel |
| Horizontal |
Yes |
| Vertical |
Yes |
| 0 to 2000 m |
No limitation |
| >2000 m |
Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 |
IP20 |
| Horizontal mounting orientation |
-25 to 60°C |
| Vertical mounting orientation |
-25 to 50°C |
| Derating |
– |
| Storage |
5 to 95%, non-condensing |
| Transport |
5 to 95%, non-condensing |
| Operation |
5 to 95%, non-condensing |
| Note |
Order 1x terminal block X20TB12 separately. |
| Pitch |
12.5+0.2 mm |
Reviews
Clear filtersThere are no reviews yet.