Fast delivery within 72 Hours
B&R X20cSO6300
6 safe digital outputs with 0.2 ASource circuitOutput type BIntegrated output protection
This module is equipped with 6 safe digital outputs. The nominal o…
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
-
Free 30-Day returns
Description
6 safe digital outputs with 0.2 ASource circuitOutput type BIntegrated output protection
This module is equipped with 6 safe digital outputs. The nominal output current is 0.2 A.The module can be used for controlling actuators in safety-related applications up to PL e or SIL 3.The outputs are designed using semiconductor technology so that the safety-related characteristics do not depend on the number of operating cycles. The “high-side high-side” variant (output type B) is required for actuators with reference potential (e.g. Enable inputs on frequency inverters). It is important to observe the special notices for the cabling in this case. Safe digital output channels provide protection against automatic restart when network errors occur.This module is designed for X20 12-pin terminal blocks.
Specification
| I/O module |
6 safe type B1 digital outputs, 24 VDC, 0.2 A, OSSD <10 µs |
|---|---|
| B&R ID code |
0xDD88 |
| Status indicators |
I/O function per channel, operating state, module status |
| Module run/error |
Yes, using LED status indicator and software |
| Outputs |
Yes, using LED status indicator and software |
| Scope |
Module |
| Function |
Module functionality |
| Standalone mode |
No |
| Max. I/O cycle time |
1 ms |
| Bus |
0.32 W |
| Internal I/O |
1.4 W |
| Additional power dissipation caused by actuators (resistive) [W] |
1.128 |
| Channel - Bus |
Yes |
| Channel - Channel |
No |
| CE |
Yes |
| UKCA |
Yes |
| CRA (Cyber Resilience Act) |
In preparation |
| Functional safety |
EN 50156-1:2004 |
| ATEX |
Zone 2, II 3G Ex nA nC IIA T5 Gc |
| UL |
cULus E115267 |
| HazLoc |
cCSAus 244665 |
| Note |
Order 1x safety-keyed terminal block separately. |
| Nominal voltage |
24 VDC |
| Voltage range |
24 VDC -15% / +20% |
| Integrated protective function |
Reverse polarity protection |
| Quantity |
6 |
| Variant |
FET, 2x positive switching, type B1, output level readable |
| Nominal output current |
0.2 A |
| Total nominal current |
1.2 A |
| Output protection |
See section "Inrush current behavior for output channels". |
| Braking voltage when switching off inductive loads |
Max. 45 VDC |
| Error detection time |
1 s |
| Insulation voltage between channel and bus |
500 Veff |
| Peak short-circuit current |
See section "Inrush current behavior for output channels". |
| Leakage current when the output is switched off |
<100 µA |
| RDS(on) |
4.7 Ω |
| Switching voltage |
I/O power supply minus voltage drop due to RDS(on) |
| Max. switching frequency |
See section "Inrush current behavior for output channels". |
| Test pulse length |
Max. 10 µs |
| Max. capacitive load |
100 nF |
| IOUT |
<100 µA |
| IGND |
<70 mA |
| Horizontal |
Yes |
| Vertical |
Yes |
| Installation elevation above sea level |
0 to 2000 m, no limitation |
| Degree of protection per EN 60529 |
IP20 |
| Horizontal mounting orientation |
-25 to 60°C |
| Vertical mounting orientation |
-25 to 50°C |
| Derating |
See section "Derating". |
| Starting temperature |
Yes, -25°C |
| Storage |
5 to 95%, non-condensing |
| Transport |
5 to 95%, non-condensing |
| Operation |
Up to 100%, condensing |
| Pitch |
25+0.2 mm |
Reviews
Clear filtersThere are no reviews yet.