Fast delivery within 72 Hours
B&R X20AI2437
2 analog current measurement inputsElectrically isolated analog channelsElectrically isolated sensor supplies16-bit digital converter resolutionNetTime timestamp: Moment of measurement…
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
-
Free 30-Day returns
Description
2 analog current measurement inputsElectrically isolated analog channelsElectrically isolated sensor supplies16-bit digital converter resolutionNetTime timestamp: Moment of measurement
The module is equipped with 2 current measurement inputs with 16-bit digital converter resolution.Each current measurement input has its own sensor supply. The two channels with their respective sensor supplies are electrically isolated from each other. The user can select between the two measurement ranges 4 to 20 mA and 0 to 25 mA.
Specification
| I/O module |
2 analog inputs 4 to 20 mA or 0 to 25 mA |
|---|---|
| B&R ID code |
0xB784 |
| Status indicators |
I/O function per channel, operating state, module status, sensor power supply per channel |
| Module run/error |
Yes, using LED status indicator and software |
| Inputs |
Yes, using LED status indicator and software |
| Sensor power supply |
Yes, using LED status indicator and software |
| Bus |
0.05 W |
| Internal I/O |
1.15 W |
| Additional power dissipation caused by actuators (resistive) [W] |
– |
| CE |
Yes |
| UKCA |
Yes |
| CRA (Cyber Resilience Act) |
In preparation |
| ATEX |
Zone 2, II 3G Ex nA nC IIA T5 Gc |
| UL |
cULus E115267 |
| HazLoc |
cCSAus 244665 |
| DNV |
Temperature: B (0 to 55°C) |
| CCS |
Yes |
| LR |
ENV1 |
| KR |
Yes |
| ABS |
Yes |
| BV |
EC33B |
| KC |
Yes |
| Input |
4 to 20 mA or 0 to 25 mA configurable using software |
| Input type |
Differential input |
| Digital converter resolution |
16-bit |
| Data output rate |
4.7 to 960 samples per second, configurable using software |
| Output format |
INT |
| 4 to 20 mA |
0.0007 %/°C |
| 0 to 25 mA |
0.0002 %/°C |
| 0 to 25000 µA |
INT 0x0000 – 0x61A8 / 1 LSB = 0x0001 = 1000 nA |
| Load |
I_IN ≥ 0.1 mA: R < 8000 Ω |
| Input protection |
Up to 30 VDC, reverse polarity protection (max. 0.1 A) |
| Open-circuit detection |
Yes, using software |
| Permissible input signal |
0 to 25 mA |
| Output of digital value during overload |
Configurable |
| Conversion procedure |
Sigma-delta |
| DC |
80 dB |
| 50 Hz |
Depends on the sampling rate: e.g. >130 dB for 50 samples per second |
| Common-mode range |
0 to 7 V |
| Nonlinearity |
<0.003% |
| Hardware |
First-order low-pass filter / cutoff frequency 2.5 kHz |
| Software |
Sinc4 filter |
| Channel - Channel |
1000 VAC |
| Channel - Bus |
1000 VAC |
| Channel - Ground |
1000 VAC |
| Power consumption |
0.75 W per channel |
| Nominal voltage |
25 V ±2% |
| Nominal output current |
Max. 30 mA |
| Short-circuit proof |
Yes, continuous |
| Up to 100 kHz |
≤2.2 mV |
| Up to 1 MHz |
≤22 mV |
| Higher |
≤100 mV |
| Typical |
<50 mA |
| Maximum |
60 mA |
| Behavior on short circuit |
Current limiting |
| Electrical isolation |
Channel isolated from channel and bus |
| Horizontal |
Yes |
| Vertical |
Yes |
| 0 to 2000 m |
No limitation |
| >2000 m |
Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 |
IP20 |
| Horizontal mounting orientation |
-25 to 60°C |
| Vertical mounting orientation |
-25 to 50°C |
| Derating |
– |
| Storage |
5 to 95%, non-condensing |
| Transport |
5 to 95%, non-condensing |
| Operation |
5 to 95%, non-condensing |
| Note |
Order 1x terminal block X20TB12 separately. |
| Pitch |
12.5+0.2 mm |
Reviews
Clear filtersThere are no reviews yet.