Fast delivery within 72 Hours
B&R 8BVI0880HWSS.004-1
Clearly structured, straightforward implementation via network-based safety technologyModular expandability through virtual wiringImmediate triggering of safety function due to short cycle timesEasy i…
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
-
Free 30-Day returns
Description
Clearly structured, straightforward implementation via network-based safety technologyModular expandability through virtual wiringImmediate triggering of safety function due to short cycle timesEasy implementation with transparent control and status information, even in the standard applicationCompact design
ACOPOSmulti SafeMOTION EnDat 2.2 inverter module, 88 A, AS, wall mounting
Specification
| B&R ID code |
0xB451 |
|---|---|
| Dynamic node allocation (DNA) |
Yes |
| Cooling and mounting type |
Wall mounting |
| Slots for plug-in modules |
2 |
| CE |
Yes |
| UKCA |
Yes |
| Functional safety |
Yes (openSAFETY) |
| UL |
cULus E225616 |
| KC |
Yes |
| Nominal |
5 to 40°C |
| Continuous power consumption |
65 kW |
| Switching frequency 5 kHz |
25 m |
| Switching frequency 10 kHz |
25 m |
| Switching frequency 20 kHz |
25 m |
| DC bus capacitance |
1980 µF |
| Variant |
ACOPOSmulti backplane |
| Input voltage |
25 VDC ±1.6% |
| Input capacitance |
32.9 µF |
| Max. power consumption |
33 W + PSMC1 + PSLOT2 + P24 V Out + PHoldingBrake |
| Quantity |
1 |
| DC bus voltage (UDC): 260 to 315 VDC |
25 VDC * (UDC/315) |
| DC bus voltage (UDC): 315 to 800 VDC |
24 VDC ±6% |
| Fuse protection |
250 mA (slow-blow) electronic, automatic reset |
| Continuous power per motor connection |
64 kW |
| Continuous current per motor connection |
88 Aeff |
| Starting at 500 m above sea level |
8.8 Aeff per 1000 m |
| Peak current |
176 Aeff |
| Nominal switching frequency |
5 kHz |
| Possible switching frequencies |
5 / 10 / 20 kHz |
| Insulation stress of the connected motor per IEC TS 60034-25:2004 |
Limit value curve A |
| Overload protection |
Yes |
| Short-circuit and ground fault protection |
Yes |
| Max. output frequency |
598 Hz |
| U, V, W, PE |
M8 threaded bolts |
| Shield connection |
Yes |
| Flexible and fine-stranded wires |
— |
| Terminal cable cross section dimension of shield connection |
12 to 50 mm |
| Output voltage |
Typ. 12.5 V |
| Continuous current per connection |
4.2 A |
| Max. internal resistance |
0.15 Ω |
| Extinction potential |
Approx. 30 V |
| Max. extinction energy per switching operation |
3 Ws |
| Max. switching frequency |
0.5 Hz |
| Overload and short-circuit protection |
Yes |
| Open-circuit monitoring |
Yes |
| Undervoltage monitoring |
Yes |
| Response threshold for open-circuit monitoring |
Approx. 0.5 A |
| Response threshold for undervoltage monitoring |
24 VDC -2% / -4% |
| Type |
EnDat 2.2 |
| Connections |
9-pin female DSUB connector |
| Status indicators |
UP/DN LEDs |
| Encoder - ACOPOSmulti |
No |
| Encoder monitoring |
Yes |
| Max. encoder cable length |
100 m |
| Load capacity |
350 mA |
| Short-circuit proof |
Yes |
| Overload-proof |
Yes |
| Signal transmission |
RS485 |
| Data transfer rate |
6.25 Mbit/s |
| Max. power consumption per encoder interface |
PSMC[W] = 19 V * IEncoder[A] |
| Circuit |
Sink |
| Input - Inverter module |
Yes |
| Input - Input |
Yes |
| Maximum |
55°C |
| Low |
<5 V |
| High |
>15 V |
| Input current at nominal voltage |
Approx. 10 mA |
| Rising edge |
52 µs ±0.5 µs (digitally filtered) |
| Falling edge |
53 µs ±0.5 µs (digitally filtered) |
| Modulation compared to ground potential |
Max. ±38 V |
| Resistance range |
500 Ω to 5 kΩ |
| Discharge capacitance |
0.44 µF |
| Power dissipation relative to continuous apparent power |
IE2 (10,25) 0.7% |
| Nominal losses in standby mode |
11.3 W |
| Hanging vertically |
Yes |
| Horizontal, face up |
Yes |
| Standing horizontally |
No |
| Pollution degree per EN 61800-5-1 |
2 (non-conductive pollution) |
| Overvoltage category per EN 61800-5-1 |
III |
| Degree of protection per EN 60529 |
IP20 |
| Storage |
5 to 95% |
| Transport |
Max. 95% at 40°C |
| Operation |
5 to 85% |
| Width |
213.5 mm |
| Height |
317 mm |
| Wall mounting |
263 mm |
| Weight |
Approx. 10.9 kg |
| Module width |
4 |
Reviews
Clear filtersThere are no reviews yet.