Fast delivery within 72 Hours
B&R 8BVI0660HWSA.008-1
ACOPOSmulti SafeMOTION SinCos inverter module, 66 A, AS, wall mounting
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
-
Free 30-Day returns
Description
ACOPOSmulti SafeMOTION SinCos inverter module, 66 A, AS, wall mounting
Specification
| B&R ID code |
0x2C27 |
|---|---|
| Dynamic node allocation (DNA) |
Yes |
| Cooling and mounting type |
Wall mounting |
| Slots for plug-in modules |
2 |
| CE |
Yes |
| UKCA |
Yes |
| CRA (Cyber Resilience Act) |
In preparation |
| Functional safety |
Yes (openSAFETY) |
| UL |
cULus E225616 |
| Nominal |
5 to 40°C |
| Continuous power consumption |
48.8 kW |
| Switching frequency 5 kHz |
25 m |
| Switching frequency 10 kHz |
25 m |
| Switching frequency 20 kHz |
25 m |
| DC bus capacitance |
1980 µF |
| Variant |
ACOPOSmulti backplane |
| Input voltage |
25 VDC ±1.6% |
| Input capacitance |
32.9 µF |
| Max. power consumption |
25 W + PSMC1 + PSLOT2 + P24 V Out + PHoldingBrake |
| Quantity |
1 |
| DC bus voltage (UDC): 260 to 315 VDC |
25 VDC * (UDC/315) |
| DC bus voltage (UDC): 315 to 800 VDC |
24 VDC ±6% |
| Fuse protection |
250 mA (slow-blow) electronic, automatic reset |
| Continuous power per motor connection |
48 kW |
| Continuous current per motor connection |
66 Aeff |
| Starting at 500 m above sea level |
6.6 Aeff per 1000 m |
| Peak current |
132 Aeff |
| Nominal switching frequency |
5 kHz |
| Possible switching frequencies |
5 / 10 / 20 kHz |
| Insulation stress of the connected motor per IEC TS 60034-25:2004 |
Limit value curve A |
| Overload protection |
Yes |
| Short-circuit and ground fault protection |
Yes |
| Max. output frequency |
598 Hz |
| U, V, W, PE |
M8 threaded bolts |
| Shield connection |
Yes |
| Flexible and fine-stranded wires |
— |
| Terminal cable cross section dimension of shield connection |
12 to 50 mm |
| Output voltage |
5 V ±5% |
| Continuous current per connection |
4.2 A |
| Max. internal resistance |
0.15 Ω |
| Extinction potential |
Approx. 30 V |
| Max. extinction energy per switching operation |
3 Ws |
| Max. switching frequency |
0.5 Hz |
| Overload and short-circuit protection |
Yes |
| Open-circuit monitoring |
Yes |
| Undervoltage monitoring |
Yes |
| Response threshold for open-circuit monitoring |
Approx. 0.5 A |
| Response threshold for undervoltage monitoring |
24 VDC -2% / -4% |
| Type |
SinCos |
| Connections |
15-pin female DSUB connector |
| Status indicators |
UP/DN LEDs |
| Encoder - ACOPOSmulti |
No |
| Encoder monitoring |
Yes |
| Max. encoder cable length |
50 m |
| Load capacity |
300 mA |
| Sense lines |
2, compensation of max. 2 x 0.7 V |
| Short-circuit proof |
Yes |
| Overload-proof |
Yes |
| Signal transmission |
Differential signal, symmetrical |
| Data transfer rate |
781.25 kbit/s |
| In motion |
0.5 to 1.35 V |
| At standstill |
0.8 to 1.35 V |
| Differential voltage deviation per signal period |
±10% |
| Common-mode voltage |
Max. -5 V to +9 V |
| Terminating resistor |
120 Ω |
| Max. input frequency |
200 kHz |
| Signal frequency (-5 dB) |
<300 kHz |
| Signal frequency (-3 dB) |
DC up to 200 kHz |
| ADC resolution |
12-bit |
| Differential voltage for low |
≤-0.2 V |
| Differential voltage for high |
≥0.2 V |
| Resolution @ 1 VSS |
Number of encoder lines * 5700 |
| Accuracy |
— |
| Noise |
— |
| Max. power consumption per encoder interface |
PSMC[W] = 25 V * (0.376 A + 0.35 * IEncoder[A]) |
| Circuit |
Sink |
| Input - Inverter module |
Yes |
| Input - Input |
Yes |
| Maximum |
55°C |
| Low |
<5 V |
| High |
>15 V |
| Input current at nominal voltage |
Approx. 10 mA |
| Rising edge |
52 µs ±0.5 µs (digitally filtered) |
| Falling edge |
53 µs ±0.5 µs (digitally filtered) |
| Modulation compared to ground potential |
Max. ±38 V |
| Resistance range |
500 Ω to 5 kΩ |
| Discharge capacitance |
0.44 µF |
| Power dissipation relative to continuous apparent power |
IE2 (10,25) 1% |
| Nominal losses in standby mode |
11.3 W |
| Hanging vertically |
Yes |
| Horizontal, face up |
Yes |
| Standing horizontally |
No |
| Pollution degree per EN 61800-5-1 |
2 (non-conductive pollution) |
| Overvoltage category per EN 61800-5-1 |
III |
| Degree of protection per EN 60529 |
IP20 |
| Storage |
5 to 95% |
| Transport |
Max. 95% at 40°C |
| Operation |
5 to 85% |
| Width |
213.5 mm |
| Height |
317 mm |
| Wall mounting |
263 mm |
| Weight |
Approx. 10.9 kg |
| Module width |
4 |
Reviews
Clear filtersThere are no reviews yet.