Fast delivery within 72 Hours
B&R 8B0P0220HW00.001-1
Wide input voltage rangeIntegrated connection for external braking resistorPassive motor short circuit brakeA motor with a hanging load is connected to an ACOPOSmulti drive system with passive power s…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
Wide input voltage rangeIntegrated connection for external braking resistorPassive motor short circuit brakeA motor with a hanging load is connected to an ACOPOSmulti drive system with passive power supply module 8B0P with passive motor short circuit brake. If the power supply to the drive system is disconnected and the hanging load begins sinking (due to failure of the motor holding brake, for example), then the motor axis rotates and the DC bus voltage increases. If the DC bus voltage overshoots a value of 15 VDC, then the DC bus is shorted via a thyristor. This limits the speed at which the hanging load sinks.The passive motor short circuit brake is designed for up to 25 kW of power. One fault event is permitted to occur maximum once every 15 minutes for this amount of power.The passive motor short circuit brake is always active and cannot be influenced by the user!The passive motor short circuit brake works without current limiting. As a result, irreparable damage to drive system components (passive power supply module 8B0P, motor, etc.) is possible at excessively high power values.The passive motor short circuit brake is not monitored. It therefore has no effect in the event of component failure!
ACOPOSmulti power supply module passive, 22 A, AS, wall mounting, passive motor short circuit brake
Specification
| Note | Integrated passive motor short circuit brake |
|---|---|
| B&R ID code | 0xA988 |
| Dynamic node allocation (DNA) | Yes |
| Cooling and mounting type | Wall mounting |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| UL | cULus E225616 Power conversion equipment |
| KC | Yes |
| Network configurations | TT, TN-S, TN-C-S |
| Mains input voltage | 3x 380 to 3x 500 VAC ±10% |
| Frequency | 50 / 60 Hz ±4% |
| Installed load | Max. 15.6 kVA |
| Power dissipation with continuous power | In preparation |
| Inrush current at 400 VAC | 10 A |
| Switch-on interval | >120 s |
| 400 VAC | 14.4 mF |
| 480 VAC | 10 mF |
| Integrated line filter per EN 61800-3, category C3 | No |
| Integrated regeneration choke | No |
| Regenerative | No |
| Power factor correction (PFC) | No |
| Line fuse | Max. 66 A (gG fuses per IEC 60269-1 or Class CC, J, T) Max. 55 A (circuit breaker per EN 60947-2 or UL 489) |
| L1, L2, L3, PE | Connector |
| PE | M5 threaded bolt |
| Shield connection | Yes |
| With wire end sleeve | 0.5 to 6 mm² |
| UL/C-UL-US | 20 to 6 AWG |
| CSA | 20 to 6 AWG |
| Terminal cable cross section dimension of shield connection | 23 to 35 mm |
| Nominal | 5 to 40°C |
| Continuous power | 3 kW |
| Mains input voltage <3x 400 VAC | 20 W/V * (400 V – Mains input voltage) |
| Starting at 500 m above sea level | 0.8 kW per 1000 m |
| Reduction of continuous power depending on cooling method | In preparation |
| Peak power output (supply) | 24 kW |
| DC bus capacitance | 660 µF |
| Overload protection | Yes |
| Short-circuit and ground fault protection | Yes (with RB+ by externally replaceable melting fuse) |
| Variant | ACOPOSmulti backplane |
| Input voltage | 25 VDC ±1.6% |
| Input capacitance | 23.5 µF |
| Max. power consumption | 12 W |
| Peak power output | 40 kW (max. 1 s) |
| Min. braking resistance | 12 Ω |
| Rated current of built-in fuse | 30 A (fast-acting) |
| RB+, RB-, PE | Connector |
| Discharge capacitance | 0.9 µF |
| Power dissipation relative to continuous apparent power | IE2 (10;25) 0.4% IE2 (50;25) 0.5% IE2 (10;50) 0.4% IE2 (50;50) 0.6% IE2 (90;50) 0.8% IE2 (10;100) 0.5% IE2 (50;100) 0.8% IE2 (90;100) 1.5% |
| Nominal losses in standby mode | 6 W |
| Hanging vertically | Yes |
| Horizontal, face up | Yes |
| Standing horizontally | No |
| Maximum | 55°C |
| Pollution degree per EN 61800-5-1 | 2 (non-conductive pollution) |
| Overvoltage category per EN 61800-5-1 | III |
| Degree of protection per EN 60529 | IP20 |
| Storage | 5 to 95% |
| Transport | Max. 95% at 40°C |
| Operation | 5 to 85% |
| Width | 106.5 mm |
| Height | 317 mm |
| Wall mounting | 263 mm |
| Weight | Approx. 5.9 kg |
| Module width | 2 |
Reviews
Clear filtersThere are no reviews yet.