Fast delivery within 72 Hours
B&R 4PP035.E300-136
Power Panel, 24 VDC, 153 x 120 mm, LCD display, 160 x 80 pixels, 3 inch, backlight, 26 keys, 300 kB SRAM, 1984 kB FlashPROM, 1 RS232, 1 CAN interface network-capable, 8 digital inputs, 24 VDC, sink/so…
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
-
Free 30-Day returns
Description
Power Panel, 24 VDC, 153 x 120 mm, LCD display, 160 x 80 pixels, 3 inch, backlight, 26 keys, 300 kB SRAM, 1984 kB FlashPROM, 1 RS232, 1 CAN interface network-capable, 8 digital inputs, 24 VDC, sink/source, 2 event counters or 1 incremental encoder or 2x gate/period measurement, 8 digital outputs, 24 VDC, 0.5 A source, 4 analog inputs, ±10 V, 12-bit, two of the analog inputs can be used as KTY10 or Pt1000 inputs, 4 analog outputs, ±10 V, 12-bit, IP65 protection (front), order 2x TB718, 1x TB103 terminal blocks separately!
Specification
| Status indicators |
I/O function per channel, status |
|---|---|
| I/O function |
Yes, using LEDs |
| Interface |
Yes, using LEDs |
| State |
Yes, using LED status indicator |
| CE |
Yes |
| UKCA |
Yes |
| CRA (Cyber Resilience Act) |
Evaluation ongoing |
| UL |
cULus E115267Industrial control equipment |
| Data buffering |
Lithium battery 3 V / 950 mAh |
| Real-time clock |
Nonvolatile, resolution 1 s |
| Voltage monitoring |
An NMI is triggered at a supply voltage of <15 VDC. |
| System bus for expansions |
No |
| Typical instruction cycle time |
0.8 µs |
| Watchdog |
Yes |
| System PROM |
448 kB FlashPROM |
| User PROM |
1984 kB FlashPROM |
| User RAM |
300 kB SRAM |
| Type |
RS232 |
| Resolution |
160 x 80 pixels |
| Display character set |
European/Cyrillic |
| Variant |
9-pin male DSUB connector |
| Electrical isolation |
No |
| Max. baud rate |
115.2 kbit/s |
| Quantity |
4 |
| Nominal voltage |
24 VDC |
| Input circuit |
IEC 61131-2 |
| Channel 1-3 |
Counters |
| Channel 4-8 |
– |
| Group isolation |
No |
| Channel - Bus |
Yes |
| Channel - Channel |
No |
| Input |
Resistance measurement in 2-wire method with constant current supply |
| Digital converter resolution |
12-bit |
| Conversion time |
150 µs for all channels |
| Output format |
INT |
| Input impedance in signal range |
20 MΩ |
| Hardware |
Cutoff frequency 10 kHz / slope 60 dB |
| Software |
– |
| Resistance measurement range |
0-4000 Ω |
| Note |
Configurable per channel |
| KTY10-6 |
-50 to 125°C |
| Pt1000 |
-200 to 850°C |
| Nominal output current |
0.5 A |
| Total nominal current |
4 A |
| Output circuit |
Source |
| Output protection |
Single-channel continuous short circuit protection |
| Internal protective circuit |
VDR |
| Output |
±10 V |
| Switch on/off behavior |
Internal enable relay for startup and errors |
| Basic accuracy |
±0.088% |
| Function keys |
10 with LED (yellow) |
| Soft keys |
No |
| System keys |
Numeric keys, cursor block |
| Label |
10 keys using slide-in labels |
| Power consumption |
Max. 6 W |
| Degree of protection per EN 60529 |
IP65 (front) |
| Operation |
10 to 90% |
| Storage |
5 to 95% |
| Width |
153 mm |
| Height |
120 mm |
| Depth |
46.1 mm |
| Weight |
0.5 kg |
Reviews
Clear filtersThere are no reviews yet.