Bus controllers Archives - CentralXL | Industrial Marketplace

B&R X20cBC00E3

sales@partnerplc.com — Fri, 31 Oct 2025 08:49:00 +0000

Fieldbus: PROFINET IOI/O configuration via the fieldbusConformance Class B (RT)Minimum cycle time 1 msIntegrated switch for cabling multiple slaves100 Mbit/s full duplex modeUp to 1440 bytes of input data and up to 1440 bytes of output data are possibleIntegrated websitePROFINET diagnostics and module diagnostics during runtime from within the master environmentModule and switch diagnostics during runtime using the website or SNMP

PROFINET (Process Field Network) is an Industrial Ethernet protocol. It uses TCP/IP and is real-time capable. X20 modules or other modules that are based on X2X Link can be connected to the bus controller. Modular system configurations are optimally supported by PROFINET IO. Using the device description file (GSDML format), it is very easy to handle project configuration in the respective engineering tool from the manufacturer of the master device.

The post B&R X20cBC00E3 appeared first on CentralXL | Industrial Marketplace.

B&R X20cBC0088

sales@partnerplc.com — Fri, 31 Oct 2025 08:48:58 +0000

Fieldbus: EtherNet/IPIntegrated 3-port switch for efficient cablingAuto-configuration of I/O modulesCan be configured by the scanner (master) using configuration assemblyWeb interfaceDHCP-capableConfigurable I/O cycle (0.5 – 4 ms)Minimum fieldbus cycle time (also requested packet interval or RPI): 1 ms

EtherNet/IP is an Ethernet-based fieldbus. EtherNet/IP was developed by Allen-Bradley (Rockwell Automation) and later transferred to the Open DeviceNet Vendor Association (ODVA) as an open standard. In 1998, a working group at ControlNet International developed a procedure for setting the published Common Industrial Protocol to Ethernet. EtherNet/IP was published in March 2000 as an open industrial automation standard based on this procedure. This bus controller makes it possible to connect X2X Link I/O nodes to EtherNet/IP. The bus controller can be operated via interface module X20IF10D1-1 or by 3rd-party systems with EtherNet/IP scanner functionality.With multifunction modules, the bus controller supports only the default function model in the event of automatic configuration by the bus controller (see the respective module description). Automation Studio V4.3 or later can be used to easily create configuration files (e.g. EDS files, binary files). All other function models are also supported by transferring configuration data to the bus controller (e.g. using the scanner via a “configuration assembly”). Automation Studio can be downloaded at no cost from the B&R website (www.br-automation.com). The evaluation license is permitted to be used to create complete configurations for fieldbus bus controllers at no cost.

The post B&R X20cBC0088 appeared first on CentralXL | Industrial Marketplace.

B&R X20cBC0087

sales@partnerplc.com — Fri, 31 Oct 2025 08:48:57 +0000

Fieldbus: Modbus/TCP, Modbus/UDPI/O configuration via the fieldbusDHCP-capableBootp-capableIntegrated double switch for efficient cablingConfigurable I/O cycle (0.5 to 4 ms)Response time:

The post B&R X20cBC0087 appeared first on CentralXL | Industrial Marketplace.

B&R X20cBC0083

sales@partnerplc.com — Fri, 31 Oct 2025 08:48:55 +0000

POWERLINKI/O configuration and firmware update via the fieldbusIntegrated hub for economical wiring

The bus controller makes it possible to connect X2X Link I/O nodes to POWERLINK. It is also possible to operate the X2X Link cycle synchronously 1:1 or synchronous to POWERLINK using a prescaler. POWERLINK is a standard protocol for Fast Ethernet equipped with hard real-time characteristics. The POWERLINK Standardization Group (EPSG) ensures that the standard remains open and is continually developed:: www.ethernet-powerlink.org.

The post B&R X20cBC0083 appeared first on CentralXL | Industrial Marketplace.

B&R X20cBC0043-10

sales@partnerplc.com — Fri, 31 Oct 2025 08:48:54 +0000

Fieldbus: CANopenAuto-configuration of I/O modulesI/O configuration via the fieldbusConstant response times even with large amounts of data (max. 32 Rx and 32 Tx PDOs)Configurable I/O cycle (0.5 to 4 ms)Configurable transfer rate or automatic transfer rate detectionHeartbeat consumer and producerEmergency producer2x SDO server, NMT slaveSimple bootup (autostart)Terminal access via serial interface on the X20PS9400Integrated terminating resistor

X20 bus controller, coated, 1 CANopen interface, order 1x terminal block TB2105 separately! Order bus base, power supply module and terminal block separately!

The post B&R X20cBC0043-10 appeared first on CentralXL | Industrial Marketplace.