Diffuse Mode and Retroreflective Sensors Archives - CentralXL | Industrial Marketplace

Pepperl Fuchs UCC4000-50GK-B26-0,15M-Y

sales@partnerplc.com — Tue, 20 Jan 2026 13:47:39 +0000

Ultrasonic sensor. Single head system, Thread M50, PTFE coated transducer, Physical LIN interface, Series: -50GK, Operating voltage: 8 … 18 V DC , ripple 10 %SS, Interface type: Physical LIN interface, Connection type: fixed cable with plug, Housing: PBT. Sensing range: 250 … 4000 mm. Dead band: 0 … 250 mm. Standard target plate: 100 mm x 100 mm. Transducer frequency: approx. 75 kHz. Operating voltage: 8 … 18 V DC , ripple 10 %SS. No-load supply current: ≤ 20 mA at 12 V DC. Power consumption: ≤ 250 mW in the measurement operating mode. Time delay before availability: ≤ 95 ms. Interface type: Physical LIN interface. Transfer rate: 19.2 kBit/s (8N1). Cycle time: 80 ms. Resolution: 2.5 mm. Repeat accuracy: ≤ 0.1 % of full-scale value. Temperature influence: 3 % of full-scale value over the entire temperature range. Electromagnetic compatibility: . Directive 2014/30/EUEN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3 The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection.: . Directive 2014/30/EU: EN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3 The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection.. Ambient temperature: -25 … 70 °C (-13 … 158 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Connection type: fixed cable with plug. Degree of protection: IP66 / IP67 ( connector excluded ). Material: . HousingPBTTransducerepoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated: . Housing: PBT. Transducer: epoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated. Connector: . TypeJST connector: PHR-3Number of pins3: . Type: JST connector: PHR-3. Number of pins: 3. Cable: . Cable diameter3 x 0.25 mm2MaterialPVCLengthL150 mm: . Cable diameter: 3 x 0.25 mm2. Material: PVC. Length: 150 mm. Mass: 100 g. Dimensions: . Height37 mmWidth50 mmLength50 mm: . Height: 37 mm. Width: 50 mm. Length: 50 mm. Output: Temperature compensation Address setting 7. Scope of delivery: 1 Nut plastic

The post Pepperl Fuchs UCC4000-50GK-B26-0,15M-Y appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs UCC2500-50GK-B26-0,15M-Y

sales@partnerplc.com — Tue, 20 Jan 2026 13:47:38 +0000

Ultrasonic sensor. Single head system, Thread M50, PTFE coated transducer, Physical LIN interface, Series: -50GK, Operating voltage: 8 … 18 V DC , ripple 10 %SS, Interface type: Physical LIN interface, Connection type: fixed cable with plug, Housing: PBT. Sensing range: 150 … 2500 mm. Dead band: 0 … 150 mm. Standard target plate: 100 mm x 100 mm. Transducer frequency: approx. 120 kHz. Operating voltage: 8 … 18 V DC , ripple 10 %SS. No-load supply current: ≤ 20 mA at 12 V DC. Power consumption: ≤ 250 mW in the measurement operating mode. Time delay before availability: ≤ 70 ms. Interface type: Physical LIN interface. Transfer rate: 19.2 kBit/s (8N1). Cycle time: 55 ms. Resolution: 2 mm. Repeat accuracy: ≤ 0.1 % of full-scale value. Temperature influence: 3 % of full-scale value over the entire temperature range. Electromagnetic compatibility: . Directive 2014/30/EUEN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3 The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection.: . Directive 2014/30/EU: EN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3 The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection.. Ambient temperature: -25 … 70 °C (-13 … 158 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Connection type: fixed cable with plug. Degree of protection: IP66 / IP67 ( connector excluded ). Material: . HousingPBTTransducerepoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated: . Housing: PBT. Transducer: epoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated. Connector: . TypeJST connector: PHR-3Number of pins3: . Type: JST connector: PHR-3. Number of pins: 3. Cable: . Cable diameter3 x 0.25 mm2MaterialPVCLengthL150 mm: . Cable diameter: 3 x 0.25 mm2. Material: PVC. Length: 150 mm. Mass: 100 g. Dimensions: . Height37 mmWidth50 mmLength50 mm: . Height: 37 mm. Width: 50 mm. Length: 50 mm. Output: Temperature compensation Address setting 7. Scope of delivery: 1 Nut plastic

The post Pepperl Fuchs UCC2500-50GK-B26-0,15M-Y appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs UCC1000-30GM-IUR2-V15

sales@partnerplc.com — Tue, 20 Jan 2026 13:47:31 +0000

Ultrasonic sensor. Single head system, High chemical resistance through PTFE coated transducer surface, Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 3000, Analog current and voltage output, Series: UCC-30GM, Operating voltage: 10 … 30 V DC , ripple 10 %SS, Interface type: RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit, Output type: 1 current output 4 … 20 mA1 voltage output 0 … 10 V. Sensing range: 80 … 1000 mm. Adjustment range: 100 … 1000 mm. Dead band: 0 … 80 mm. Standard target plate: 100 mm x 100 mm. Transducer frequency: approx. 175 kHz. Response delay: 65 ms minimum195 ms factory setting. LED green: solid: Power-onflashing: Standby mode or program function object detected. LED yellow 1: solid: object in evaluation rangeflashing: program function. LED yellow 2: solid: object in detection rangeflashing: program function. LED red: solid: temperature/program plug not connectedflashing: fault or program function object not detected. Temperature/teach-in connector: Temperature compensation , Evaluation range programming , output function setting. Operating voltage: 10 … 30 V DC , ripple 10 %SS. Power consumption: ≤ 900 mW. Time delay before availability: ≤ 500 ms. Interface type: RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit. Synchronization: bi-directional0 level -UB…+1 V1 level: +4 V…+UB input impedance: > 12 KOhmsynchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms. Synchronization frequency: . Common mode operationmax. 30 HzMultiplex operation≤ 30 Hz / n , n = number of sensors , n ≤ 5: . Common mode operation: max. 30 Hz. Multiplex operation: ≤ 30 Hz / n , n = number of sensors , n ≤ 5. Output type: 1 current output 4 … 20 mA1 voltage output 0 … 10 V. Resolution: evaluation range [mm]/4000, but ≥ 0.35 mm. Deviation of the characteristic curve: ≤ 0.2 % of full-scale value. Repeat accuracy: ≤ 0.1 % of full-scale value. Load impedance: current output: ≤ 500 Ohm voltage output: ≥ 1000 Ohm. Temperature influence: ≤ 2 % from full-scale value (with temperature compensation)≤ 0.2 %/K (without temperature compensation). Standard conformity: . StandardsEN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003: . Standards: EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003. UL approval: cULus Listed, General Purpose. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: 0 … 70 °C (32 … 158 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Connection type: Connector plug M12 x 1 , 5-pin. Degree of protection: IP65. Material: . HousingStainless steel 1.4305 / AISI 303 O-ring for cover seal: VitonTransducerPTFE (diaphragm surface): . Housing: Stainless steel 1.4305 / AISI 303 O-ring for cover seal: Viton. Transducer: PTFE (diaphragm surface). Mass: 170 g. Dimensions: . Length115 mmDiameter30 mm: . Length: 115 mm. Diameter: 30 mm. Output: evaluation limit A1: 100 mm evaluation limit A2: 1000 mm rising ramp

The post Pepperl Fuchs UCC1000-30GM-IUR2-V15 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs UC800-F77S-IU-IO-V31

sales@partnerplc.com — Tue, 20 Jan 2026 13:47:29 +0000

Ultrasonic sensor. Single head system, IO-Link interface for parameterization, Programmable via DTM with PACTWARE, Selectable sound lobe width, Series: -F77, Operating voltage: 18 … 30 V DC , ripple 10 %SS , Interface type: IO-Link (available after activation via programming button until next reset), Output type: 1 analog output 0 (4) … 20 mA or 1 analog output 0 … 10 V, UL approval: cULus Listed, Class 2 Power Source. Sensing range: 60 … 800 mm. Adjustment range: 70 … 800 mm. Dead band: 0 … 60 mm. Standard target plate: 100 mm x 100 mm. Transducer frequency: approx. 255 kHz. Response delay: minimum : 13 ms factory setting: 49 ms. Sensor cycle time: ≥ 13 ms (factory setting) ; programmable to 60 s. Non-volatile memory: EEPROM. Write cycles: 300000. LED green: solid: power onflashing: standby mode or IO-Link communication. LED yellow: solid: object in evaluation rangeflashing: programming of the limits, object detected. LED red: solid: faultflashing: programming limits, object not detected. Operating voltage: 18 … 30 V DC , ripple 10 %SS. No-load supply current: ≤ 50 mA. Power consumption: ≤ 500 mW. Time delay before availability: ≤ 300 ms. Interface type: IO-Link (available after activation via programming button until next reset). Input/output type: 1 synchronization connection, bidirectional. 0 Level0 … 1 V1 Level2.5 V … UBInput impedance> 22 kΩOutput currentcurrent source 22 kΩ. Output current: current source < 2.5 mA. Pulse length: ≥ 1 ms with external control, low active. Synchronization frequency: . Common mode operation≤ 82 HzMultiplex operation≤ 82 Hz / n , n = number of sensors , n ≤ 10: . Common mode operation: ≤ 82 Hz. Multiplex operation: ≤ 82 Hz / n , n = number of sensors , n ≤ 10. Output type: 1 analog output 0 (4) … 20 mA or 1 analog output 0 … 10 V. Resolution: current output: evaluation range [mm]/3200 but ≥ 0.35 mmvoltage output: evaluation range [mm]/4000 but ≥ 0.35 mm. Deviation of the characteristic curve: ≤ ± 1 % of full-scale value. Repeat accuracy: ≤ ± 0.1 % of full-scale value. Load impedance: current output: ≤ 500 Ohm voltage output: ≥ 1000 Ohm. Temperature influence: ≤ ± 0.75 % of the end value (with temperature compensation) from 10 minutes after switching on the sensor ; 0.17 %/K (without temperature compensation). Standard conformity: . StandardsEN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 IEC 61131-9:2013: . Standards: EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 IEC 61131-9:2013. UL approval: cULus Listed, Class 2 Power Source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: current output -25 … 60 °C (-13 … 140 °F) voltage output -25 … 70 °C (-13 … 158 °F) When fixing with one M18 nut, the temperature range for each begins with 0 °C (32 °F).. Storage temperature: -40 … 85 °C (-40 … 185 °F). Connection type: Connector plug M8 x 1 , 4-pin. Degree of protection: IP67. Material: . HousingPolycarbonateTransducerepoxy resin/hollow glass sphere mixture; polyurethane foam: . Housing: Polycarbonate. Transducer: epoxy resin/hollow glass sphere mixture; polyurethane foam. Installation position: any position. Mass: 13 g. Tightening torque, fastening screws: with M3 nuts max. 0.2 Nm with M18 nuts max. 1 Nm. Dimensions: . Height31 mmWidth21 mmLength23 mm: . Height: 31 mm. Width: 21 mm. Length: 23 mm. Output: near limit: 70 mm far limit: 800 mm Output mode: rising ramp output type: 4 … 20 mA. Beam width: wide. Scope of delivery: 1 Nut plastic

The post Pepperl Fuchs UC800-F77S-IU-IO-V31 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs UC6000-30GM70S-2E2R2-V15

sales@partnerplc.com — Tue, 20 Jan 2026 13:47:27 +0000

Ultrasonic sensor. Ultrasonic diffuse sensor with pivoting transducer, 2 switch outputs, Synchronization options, Temperature compensation, Series: UC-30GM70, Rated operating voltage: 24 V DC, Operating voltage: 12 … 30 V DC (including ripple), Interface type: Infrared, Output type: 2 switch outputs PNP, NO ( NC contact programmable ), UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: Connector plug M12 x 1 , 5-pin. Sensing range: 350 … 6000 mm. Adjustment range: 400 … 6000 mm. Dead band: 0 … 350 mm. Standard target plate: 100 mm x 100 mm. Transducer frequency: approx. 80 kHz. Response delay: ≤ 275 ms. Temperature drift: ≤ ± 1.5 % of full-scale value. Time delay before availability: ≤ 300 ms. Permissible cable length: max. 300 m. LED yellow: solid Switching state switch output 1. LED green/yellow: yellow: switching state switch output 2 green: Teach-In. Potentiometer: Switching output 1 and Switching output 2 adjustable. Rated operating voltage: 24 V DC. Operating voltage: 12 … 30 V DC (including ripple). Ripple: ≤ 10 %. No-load supply current: ≤ 50 mA. Interface type: Infrared. Mode: point-to-point connection. Input/output type: 1 synchronization connection, bidirectional ( Factory setting: synchronized mode ) / Teach-In input. 0 Level≤ 3 V1 Level≥ 15 VInput impedancetyp. 900 ΩNumber of sensorsmax. 10: . 0 Level: ≤ 3 V. 1 Level: ≥ 15 V. Input impedance: typ. 900 Ω. Number of sensors: max. 10. Output type: 2 switch outputs PNP, NO ( NC contact programmable ). Default setting: 400 … 6000 mm ( adjustable via potentiometer ). Repeat accuracy: ± 9 mm. Operating current: per 150 mA , short-circuit/overload protected. Switching frequency: ≤ 1 Hz. Switching hysteresis: 60 mm ( programmable ). Voltage drop: ≤ 3 V. Off-state current: ≤ 10 µA. Standard conformity: . StandardsEN IEC 60947-5-2:2020 IEC 60947-5-2:2019: . Standards: EN IEC 60947-5-2:2020 IEC 60947-5-2:2019. UL approval: cULus Listed, Class 2 Power Source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -25 … 70 °C (-13 … 158 °F). Storage temperature: -25 … 85 °C (-13 … 185 °F). Shock resistance: 30 g , 11 ms period. Vibration resistance: 10 … 55 Hz , Amplitude ± 1 mm. Connection type: Connector plug M12 x 1 , 5-pin. Degree of protection: IP65. Material: . Housingbrass, nickel-platedTransducerepoxy resin/hollow glass sphere mixture; polyurethane foam: . Housing: brass, nickel-plated. Transducer: epoxy resin/hollow glass sphere mixture; polyurethane foam. Installation position: any position. Mass: 300 g. Dimensions: . Length143.5 mmDiameter30 mm: . Length: 143.5 mm. Diameter: 30 mm. Construction type: Cylindrical

The post Pepperl Fuchs UC6000-30GM70S-2E2R2-V15 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs UC6000-30GM70-2E2R2-V15

sales@partnerplc.com — Tue, 20 Jan 2026 13:47:26 +0000

Ultrasonic sensor. Ultrasonic direct detection sensor, 2 switch outputs, Synchronization options, Temperature compensation, Series: UC-30GM70, Rated operating voltage: 24 V DC, Operating voltage: 12 … 30 V DC (including ripple), Interface type: Infrared, Output type: 2 switch outputs PNP, NO ( NC contact programmable ), UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: Connector plug M12 x 1 , 5-pin. Sensing range: 350 … 6000 mm. Adjustment range: 400 … 6000 mm. Dead band: 0 … 350 mm. Standard target plate: 100 mm x 100 mm. Transducer frequency: approx. 80 kHz. Response delay: ≤ 275 ms. Temperature drift: ≤ ± 1.5 % of full-scale value. Time delay before availability: ≤ 300 ms. Permissible cable length: max. 300 m. LED yellow: solid Switching state switch output 1. LED green/yellow: yellow: switching state switch output 2 green: Teach-In. Potentiometer: Switching output 1 and Switching output 2 adjustable. Rated operating voltage: 24 V DC. Operating voltage: 12 … 30 V DC (including ripple). Ripple: ≤ 10 %. No-load supply current: ≤ 50 mA. Interface type: Infrared. Mode: point-to-point connection. Input/output type: 1 synchronization connection, bidirectional ( Factory setting: synchronized mode ) / Teach-In input. 0 Level≤ 3 V1 Level≥ 15 VInput impedancetyp. 900 ΩNumber of sensorsmax. 10: . 0 Level: ≤ 3 V. 1 Level: ≥ 15 V. Input impedance: typ. 900 Ω. Number of sensors: max. 10. Output type: 2 switch outputs PNP, NO ( NC contact programmable ). Default setting: 400 … 6000 mm ( adjustable via potentiometer ). Repeat accuracy: ± 9 mm. Operating current: per 150 mA , short-circuit/overload protected. Switching frequency: ≤ 1 Hz. Switching hysteresis: 60 mm ( programmable ). Voltage drop: ≤ 3 V. Off-state current: ≤ 10 µA. Standard conformity: . StandardsEN IEC 60947-5-2:2020 IEC 60947-5-2:2019: . Standards: EN IEC 60947-5-2:2020 IEC 60947-5-2:2019. UL approval: cULus Listed, Class 2 Power Source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -25 … 70 °C (-13 … 158 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Shock resistance: 30 g , 11 ms period. Vibration resistance: 10 … 55 Hz , Amplitude ± 1 mm. Connection type: Connector plug M12 x 1 , 5-pin. Degree of protection: IP65. Material: . Housingbrass, nickel-platedTransducerepoxy resin/hollow glass sphere mixture; polyurethane foam: . Housing: brass, nickel-plated. Transducer: epoxy resin/hollow glass sphere mixture; polyurethane foam. Installation position: any position. Mass: 280 g. Dimensions: . Length121.2 mmDiameter30 mm: . Length: 121.2 mm. Diameter: 30 mm. Construction type: Cylindrical

The post Pepperl Fuchs UC6000-30GM70-2E2R2-V15 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs UC6000-30GM-IUEP-IO-V15

sales@partnerplc.com — Tue, 20 Jan 2026 13:47:24 +0000

Ultrasonic sensor. Single head system, IO-Link interface for service and process data, Programmable via DTM with PACTWARE, Switch output and analog output, Series: UC-30GM-IO, Operating voltage: 10 … 30 V DC , ripple 10 %SS 15 … 30 V voltage output, Interface type: IO-Link, Output type: 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected Current output 4 mA … 20 mA or voltage output 0 V … 10 V configurable, UL approval: cULus Listed, Class 2 Power Source. Sensing range: 350 … 6000 mm. Adjustment range: 400 … 6000 mm. Dead band: 0 … 350 mm. Standard target plate: 100 mm x 100 mm. Transducer frequency: approx. 65 kHz. Response delay: minimum : 140 ms factory setting: 280 ms. Non-volatile memory: EEPROM. Write cycles: 100000. LED green: solid: Power onflashing: Standby mode or IO link communication. LED yellow 1: solid: Object in evaluation rangeflashing: Learning function, object detected. LED yellow 2: solid: Object in evaluation rangeflashing: Learning function, object detected. LED red: solid red: Errorred, flashing: program function, object not detected. Operating voltage: 10 … 30 V DC , ripple 10 %SS 15 … 30 V voltage output. No-load supply current: ≤ 60 mA. Power consumption: ≤ 1 W. Time delay before availability: ≤ 200 ms. Interface type: IO-Link. Protocol: IO-Link V1.0. Transfer rate: Acyclical: typical 44 Bit/s. Cycle time: min. 72 ms. Mode: COM2 (38.4 kBit/s). Process data width: 16 bit. SIO mode support: yes. Input/output type: 1 synchronization connection, bidirectional. 0 Level0 … 1 V1 Level4 V … UBInput impedance> 12 kΩOutput current 12 kΩ. Output current: < 12 mA. Pulse length: 0.5 … 300 ms (level 1). Pulse interval: ≥ 74 ms (level 0). Synchronization frequency: . Common mode operation≤ 13 HzMultiplex operation≤ 14 Hz / n , n = number of sensors , n ≤ 10 (factory setting: n = 5 ): . Common mode operation: ≤ 13 Hz. Multiplex operation: ≤ 14 Hz / n , n = number of sensors , n ≤ 10 (factory setting: n = 5 ). Output type: 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected Current output 4 mA … 20 mA or voltage output 0 V … 10 V configurable. Rated operating current: 200 mA , short-circuit/overload protected. Voltage drop: ≤ 2.5 V. Resolution: current output: evaluation range [mm]/3200 but ≥ 0.35 mmvoltage output: evaluation range [mm]/4000 but ≥ 0.35 mm. Deviation of the characteristic curve: ≤ 0.2 % of full-scale value. Repeat accuracy: ≤ 0.1 % of full-scale value. Switching frequency: ≤ 1.5 Hz. Range hysteresis: 1 % of the adjusted operating range (default settings), programmable. Load impedance: current output: ≤ 300 Ohm voltage output: ≥ 1000 Ohm. Temperature influence: ≤ 1.5 % from full-scale value (with temperature compensation)≤ 0.2 %/K (without temperature compensation). Standard conformity: . StandardsEN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003: . Standards: EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003. UL approval: cULus Listed, Class 2 Power Source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -25 … 70 °C (-13 … 158 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Connection type: Connector plug M12 x 1 , 5-pin. Degree of protection: IP67. Material: . HousingStainless steel 1.4305 / AISI 303 TPU PolyamidesTransducerepoxy resin/hollow glass sphere mixture; polyurethane foam: . Housing: Stainless steel 1.4305 / AISI 303 TPU Polyamides. Transducer: epoxy resin/hollow glass sphere mixture; polyurethane foam. Mass: 165 g. Dimensions: . Length106 mmDiameter73 mm: . Length: 106 mm. Diameter: 73 mm. Output 1: near switch point: 400 mm far switch point: 6000 mm Output mode: Window mode output behavior: NO contact. Output 2: near limit: 500 mm far limit: 3000 mm Output mode: rising ramp output behavior: Current output 4 mA … 20 mA. Beam width: wide

The post Pepperl Fuchs UC6000-30GM-IUEP-IO-V15 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs UC6000-30GM-2EP-IO-V15

sales@partnerplc.com — Tue, 20 Jan 2026 13:47:22 +0000

Ultrasonic sensor. Single head system, IO-Link interface for service and process data, Programmable via DTM with PACTWARE, 2 programmable switch outputs, Series: UC-30GM-IO, Operating voltage: 10 … 30 V DC , ripple 10 %SS, Interface type: IO-Link, Output type: 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V. Sensing range: 350 … 6000 mm. Adjustment range: 400 … 6000 mm. Dead band: 0 … 350 mm. Standard target plate: 100 mm x 100 mm. Transducer frequency: approx. 65 kHz. Response delay: minimum : 140 ms factory setting: 280 ms. Non-volatile memory: EEPROM. Write cycles: 100000. LED green: solid: Power onflashing: Standby mode or IO link communication. LED yellow 1: solid: Object in evaluation rangeflashing: Learning function, object detected. LED yellow 2: solid: Object in evaluation rangeflashing: Learning function, object detected. LED red: solid red: Errorred, flashing: program function, object not detected. Operating voltage: 10 … 30 V DC , ripple 10 %SS. No-load supply current: ≤ 60 mA. Power consumption: ≤ 1 W. Time delay before availability: ≤ 200 ms. Interface type: IO-Link. Protocol: IO-Link V1.0. Transfer rate: Acyclical: typical 44 Bit/s. Cycle time: min. 72 ms. Mode: COM2 (38.4 kBit/s). Process data width: 16 bit. SIO mode support: yes. Input/output type: 1 synchronization connection, bidirectional. 0 Level0 … 1 V1 Level4 V … UBInput impedance> 12 kΩOutput current 12 kΩ. Output current: < 12 mA. Pulse length: 0.5 … 300 ms (level 1). Pulse interval: ≥ 74 ms (level 0). Synchronization frequency: . Common mode operation≤ 13 HzMultiplex operation≤ 14 Hz / n , n = number of sensors , n ≤ 10 (factory setting: n = 5 ): . Common mode operation: ≤ 13 Hz. Multiplex operation: ≤ 14 Hz / n , n = number of sensors , n ≤ 10 (factory setting: n = 5 ). Output type: 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected. Rated operating current: 200 mA , short-circuit/overload protected. Voltage drop: ≤ 2.5 V. Repeat accuracy: ≤ 0.1 % of full-scale value. Switching frequency: ≤ 1.5 Hz. Range hysteresis: 1 % of the adjusted operating range (default settings), programmable. Temperature influence: ≤ 1.5 % from full-scale value (with temperature compensation)≤ 0.2 %/K (without temperature compensation). Standard conformity: . StandardsEN IEC 60947-5-2:2020 IEC 60947-5-2:2019: . Standards: EN IEC 60947-5-2:2020 IEC 60947-5-2:2019. UL approval: cULus Listed, Class 2 Power Source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -25 … 70 °C (-13 … 158 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Connection type: Connector plug M12 x 1 , 5-pin. Degree of protection: IP67. Material: . HousingStainless steel 1.4305 / AISI 303 TPU PolyamidesTransducerepoxy resin/hollow glass sphere mixture; polyurethane foam: . Housing: Stainless steel 1.4305 / AISI 303 TPU Polyamides. Transducer: epoxy resin/hollow glass sphere mixture; polyurethane foam. Mass: 165 g. Dimensions: . Length112 mmDiameter73 mm: . Length: 112 mm. Diameter: 73 mm. Output 1: near switch point: 400 mm far switch point: 6000 mm output function: Window mode output behavior: NO contact. Output 2: near switch point: 500 mm far switch point: 3000 mm output function: Window mode output behavior: NO contact. Beam width: wide

The post Pepperl Fuchs UC6000-30GM-2EP-IO-V15 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs UC500-L2-I-V15

sales@partnerplc.com — Tue, 20 Jan 2026 13:47:20 +0000

Ultrasonic sensor. Single head system, Sensor head bidirectional and rotatable, Function indicators visible from all directions, Quick mounting bracket, Series: UC-L2, Operating voltage: 10 … 30 V DC , ripple 10 %SS, Interface type: Serial interface (programming adapter required) 9600 BPS, no parity, 8 data bits, 1 stop bit, Output type: 1 analog output 4 … 20 mA, UL approval: cULus Listed, General Purpose, CCC approval: CCC approval / marking not required for products rated ≤36 V. Sensing range: 35 … 500 mm. Adjustment range: 50 … 500 mm. Dead band: 0 … 35 mm. Standard target plate: 100 mm x 100 mm. Transducer frequency: approx. 380 kHz. Response delay: minimum: 20 ms factory setting: 145 ms. Time delay before availability: ≤ 1600 ms. LED green: Operating display. LED yellow: object in evaluation range. LED red: error. Operating voltage: 10 … 30 V DC , ripple 10 %SS. No-load supply current: ≤ 50 mA. Interface type: Serial interface (programming adapter required) 9600 BPS, no parity, 8 data bits, 1 stop bit. Input/output type: 1 synchronization connection, bidirectional. 0 Level0 … 1 V1 Level4 V … UBInput impedance> 12 kΩOutput current 12 kΩ. Output current: 12 kΩ. Pulse length: 2 … 10 s. Output type: 1 analog output 4 … 20 mA. Resolution: Evaluation range [mm]/3200, however ≥ 0.05 mm. Deviation of the characteristic curve: ≤ 0.2 % of full-scale value. Repeat accuracy: ≤ 0.1 % of full-scale value. Load impedance: ≤ 500 Ω at UB ≥ 14V ≤ 300 Ω at UB < 14V. Temperature influence: ≤ 1.5 % of full-scale value. Standard conformity: . StandardsEN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 EN 60947-5-7:2003 IEC 60947-5-7:2003: . Standards: EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 EN 60947-5-7:2003 IEC 60947-5-7:2003. UL approval: cULus Listed, General Purpose. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -25 … 70 °C (-13 … 158 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Connection type: Connector plug M12 x 1 , 5-pin. Degree of protection: IP67. Material: . HousingPA-GF35Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam: . Housing: PA-GF35. Transducer: epoxy resin/hollow glass sphere mixture; polyurethane foam. Mass: 115 g. Dimensions: . Height40 mmWidth40 mmLength40 mm: . Height: 40 mm. Width: 40 mm. Length: 40 mm. Output: evaluation limit A1: 50 mm evaluation limit A2: 500 mm output function: rising ramp. Beam width: wide. Evaluation procedure: low-pass behavior. Supplementary information: Switch settings of the external programming adapter: "output load": pull-down "output logic": noninv

The post Pepperl Fuchs UC500-L2-I-V15 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs UC500-L2-E5-V15

sales@partnerplc.com — Tue, 20 Jan 2026 13:47:18 +0000

Ultrasonic sensor. Single head system, Sensor head bidirectional and rotatable, Function indicators visible from all directions, Quick mounting bracket, Series: UC-L2, Operating voltage: 10 … 30 V DC , ripple 10 %SS, Interface type: Serial interface (programming adapter required) 9600 BPS, no parity, 8 data bits, 1 stop bit, Output type: 1 switching output E5, PNP NO/NC, programmable, UL approval: cULus Listed, Class 2 Power Source. Sensing range: 35 … 500 mm. Adjustment range: 50 … 500 mm. Dead band: 0 … 35 mm. Standard target plate: 100 mm x 100 mm. Transducer frequency: approx. 380 kHz. Response delay: minimum: 20 ms factory setting: 55 ms. Time delay before availability: ≤ 1600 ms. LED green: Operating display. LED yellow: switching state. LED red: error. Operating voltage: 10 … 30 V DC , ripple 10 %SS. No-load supply current: ≤ 50 mA. Interface type: Serial interface (programming adapter required) 9600 BPS, no parity, 8 data bits, 1 stop bit. Input/output type: 1 synchronization connection, bidirectional. 0 Level0 … 1 V1 Level4 V … UBInput impedance> 12 kΩOutput current 12 kΩ. Output current: 10 kΩ. Pulse length: 2 … 10 s. Output type: 1 switching output E5, PNP NO/NC, programmable. Rated operating current: 200 mA , short-circuit/overload protected. Voltage drop: ≤ 2 V. Repeat accuracy: ≤ 0.1 % of full-scale value. Switching frequency: ≤ 14 Hz. Range hysteresis: programmable , preset to 1 mm. Temperature influence: < 1.5 % of full-scale value. Standard conformity: . StandardsEN IEC 60947-5-2:2020 IEC 60947-5-2:2019: . Standards: EN IEC 60947-5-2:2020 IEC 60947-5-2:2019. UL approval: cULus Listed, Class 2 Power Source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -25 … 70 °C (-13 … 158 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Connection type: Connector plug M12 x 1 , 5-pin. Degree of protection: IP67. Material: . HousingPA-GF35Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam: . Housing: PA-GF35. Transducer: epoxy resin/hollow glass sphere mixture; polyurethane foam. Mass: 115 g. Dimensions: . Height40 mmWidth40 mmLength40 mm: . Height: 40 mm. Width: 40 mm. Length: 40 mm. Output: near switch point: 50 mm far switch point: 500 mm output function: Window mode output behavior: NO contact. Beam width: wide. Evaluation procedure: averaging (MxN)M = 5N = 2. Supplementary information: Switch settings of the external programming adapter: "output load": pull-down "output logic": inv

The post Pepperl Fuchs UC500-L2-E5-V15 appeared first on CentralXL | Industrial Marketplace.