Sensors for Entrance Automation Archives - CentralXL | Industrial Marketplace

Pepperl Fuchs UB500-18GM75-E5-V15

sales@partnerplc.com — Tue, 20 Jan 2026 13:45:45 +0000

Ultrasonic sensor. Single head system, Switching output, 5 different output functions can be set, Selectable sound lobe width, Series: UB-18GM75, Operating voltage: 10 … 30 V DC , ripple 10 %SS, Output type: 1 switch output PNP Normally open/closed , programmable, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: Connector plug M12 x 1 , 5-pin, Housing: brass, nickel-plated. Sensing range: 30 … 500 mm. Adjustment range: 50 … 500 mm. Dead band: 0 … 30 mm. Standard target plate: 100 mm x 100 mm. Transducer frequency: approx. 380 kHz. Response delay: approx. 50 ms. LED yellow: indication of the switching stateflashing: program function object detected. LED red: solid red: Errorred, flashing: program function, object not detected. Operating voltage: 10 … 30 V DC , ripple 10 %SS. No-load supply current: ≤ 50 mA. Synchronization: 1 synchronous connection, bi-directional0-level: -UB…+1 V1-level: +4 V…+UB input impedance: > 12 kΩsynchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms. Synchronization frequency: . Common mode operationmax. 95 HzMultiplex operation≤ 95 Hz / n, n = number of sensors, n ≤ 5: . Common mode operation: max. 95 Hz. Multiplex operation: ≤ 95 Hz / n, n = number of sensors, n ≤ 5. Input type: 1 program input,operating range 1: -UB … +1 V, operating range 2: +4 V … +UB input impedance: > 4.7 kΩ; program pulse: ≥ 1 s. Output type: 1 switch output PNP Normally open/closed , programmable. Rated operating current: 200 mA , short-circuit/overload protected. Voltage drop: ≤ 3 V. Repeat accuracy: ≤ 1 %. Switching frequency: max. 8 Hz. Range hysteresis: 1 % of the set operating distance. Temperature influence: ± 1.5 % of full-scale value. Standard conformity: . StandardsEN IEC 60947-5-2:2020 IEC 60947-5-2:2019: . Standards: EN IEC 60947-5-2:2020 IEC 60947-5-2:2019. UL approval: cULus Listed, Class 2 Power Source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -25 … 70 °C (-13 … 158 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Connection type: Connector plug M12 x 1 , 5-pin. Degree of protection: IP67. Material: . Housingbrass, nickel-platedTransducerepoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT: . Housing: brass, nickel-plated. Transducer: epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT. Mass: 60 g. Dimensions: . Length85 mmDiameter18 mm: . Length: 85 mm. Diameter: 18 mm. Output: Switch point A1: 50 mm Switch point A2: 500 mm output function: Window mode output behavior: NO contact. Beam width: wide

The post Pepperl Fuchs UB500-18GM75-E5-V15 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs TopScan-S-M2S/L750

sales@partnerplc.com — Tue, 20 Jan 2026 13:44:38 +0000

Active infrared scanner. Moving presence sensor for swing doors, Configurable for a wide range of door leaf widths, Category 2, tested and certified to DIN 18650/EN 16005, Modular construction with master/slave modules, Safe function even on difficult floors, Function: Open and secure, Sensor principle: Active infrared scanner, Operating voltage: 24 V DC +/- 20 %, Signal output: Relay, 1 alternator. Detection range min.: 0 … 1500 mm. Detection range max.: 0 … 2500 mm. Reference target: Minimum degree of reflection of the floor: 6 % Minimum degree of reflection to objects being detected: 0 %. Light source: IRED. Light type: modulated infrared light 875 nm. Black-white difference (6 %/90 %): < 2 % at 2000 mm sensor range. Number of beams: 3 (number of built-in sensor modules AIR). Operating mode: Background evaluation. Diameter of the light spot: 1.1 cm x 8.3 cm at 2000 mm sensor range. Resolution: Reference object CA DIN 186850-1/EN 16005 in all applicable locations. Safety Integrity Level (SIL): SIL 1. Performance level (PL): PL c. Category: Cat. 2. MTTFd: 880 a per module. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 90 %. Function indicator: LED red/green. Control elements: Sensing range adjuster ; Adjuster for edge monitoring left/right. Operating voltage: 24 V DC +/- 20 %. No-load supply current: 210 mA. Test input: active at U = 11 V DC at 30 V DC inactive at U = -3 V DC at 5 V DC. Switching type: Relay de-energized at object inside the scanning range. Signal output: Relay, 1 alternator. Switching voltage: 5 V … 30 V AC/DC. Switching current: max. 300 mA. Response time: ≤ 70 ms. Functional safety: ISO 13849-1. Product standard: EN 12978 ; EN 16005 ; DIN 18650. CCC approval: CCC approval / marking not required for products rated ≤36 V. TÜV approval: TÜV NORD. Ambient temperature: -10 … 50 °C (14 … 122 °F). Relative humidity: Humidity at 20 °C: < 90 % Humidity at 60 °C: < 50 %. Housing length L: 750 mm. Mounting height: max. 2500 mm. Degree of protection: IP52 , IP54 Optional (with special seal). Connection: screw terminals ; Cable cross-section 0.3 mm2 … 1.3 mm2 (AWG26-16), single-stranded/multistranded CU. Material: . Housingaluminum / ABSOptical facePMMA: . Housing: aluminum / ABS. Optical face: PMMA. Dimensions: . Height42 mmDepth37 mmLength750 mm: . Height: 42 mm. Depth: 37 mm. Length: 750 mm. Cable length: max. 30 m. Note: Safety fuse ≤ 1 A (slow-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly.

The post Pepperl Fuchs TopScan-S-M2S/L750 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs TopScan-S Cable Loop Basic

sales@partnerplc.com — Tue, 20 Jan 2026 13:44:37 +0000

Accessory DGE. Flexible metal conduit, Protection against contamination and damage. Material: metal with PVC sheathing black. Dimensions: 600 mm. Length600 mm: . Length: 600 mm. Scope of delivery: Protective hose , Retainer , Screw kit

The post Pepperl Fuchs TopScan-S Cable Loop Basic appeared first on CentralXL | Industrial Marketplace.