Pepperl Fuchs IQH1-F61-V1

sales@partnerplc.com — Tue, 20 Jan 2026 13:28:37 +0000

RFID read/write device. HF RFID read/write device, ISO 15693, for IDENTControl. Operating frequency: 13.56 MHz. Transfer rate: 26 kBit/s. Sensing range: . Read distance0 … 55 mmWrite distance0 … 55 mmWidthmax. 45 mm: . Read distance: 0 … 55 mm. Write distance: 0 … 55 mm. Width: max. 45 mm. UL File Number: E87056. MTBF: 385 a (Operation at +40 °C). Power consumption: ≤ 1.3 W. Supply: from the IDENTControl. Radio equipment: . Directive 2014/53/EUEN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364: . Directive 2014/53/EU: EN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364. RoHS: . Directive 2011/65/EU (RoHS)IEC/EN 63000: . Directive 2011/65/EU (RoHS): IEC/EN 63000. Degree of protection: EN 60529. RFID: ISO/IEC 15693-2 ISO/IEC 15693-3 ISO/IEC 18000-3. FCC approval: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Caution:Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.. IC approval: This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.. Ambient temperature: -25 … 70 °C (-13 … 158 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Degree of protection: IP67. Connection: connector M12 x 1. Material: . HousingABSEncapsulation compoundWEVO 403FL/300: . Housing: ABS. Encapsulation compound: WEVO 403FL/300. Installation: . Distance between two headsMultiplex on: ≥ 100 mm Multiplex off: ≥ 150 mm: . Distance between two heads: Multiplex on: ≥ 100 mm Multiplex off: ≥ 150 mm. Mass: approx. 60 g. Dimensions: . Height12 mmWidth28 mmLength80 mm: . Height: 12 mm. Width: 28 mm. Length: 80 mm. Cable length: 20 cm

The post Pepperl Fuchs IQH1-F61-V1 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs IQH1-18GM-V1

sales@partnerplc.com — Tue, 20 Jan 2026 13:28:36 +0000

RFID read/write device. HF RFID read/write device, ISO 15693, for IDENTControl. Operating frequency: 13.56 MHz. Transfer rate: 26 kBit/s. Sensing range: . Read distance0 … 50 mmWrite distance0 … 50 mmWidthmax. 45 mm: . Read distance: 0 … 50 mm. Write distance: 0 … 50 mm. Width: max. 45 mm. UL File Number: E87056. MTBF: 375 a (Operation at +40 °C). LED green/yellow: Multihole-LED:green: power ongreen flashing: read/write attempt performedyellow: data carrier detected. Power consumption: ≤ 1.2 W. Supply: from the IDENTControl. Radio equipment: . Directive 2014/53/EUEN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364: . Directive 2014/53/EU: EN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364. RoHS: . Directive 2011/65/EU (RoHS)IEC/EN 63000: . Directive 2011/65/EU (RoHS): IEC/EN 63000. Degree of protection: EN 60529. RFID: ISO/IEC 15693-2 ISO/IEC 15693-3 ISO/IEC 18000-3. FCC approval: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Caution:Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.. IC approval: This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.. Ambient temperature: -25 … 70 °C (-13 … 158 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Degree of protection: IP67. Connection: connector M12 x 1. Material: . HousingPBT/stainless steelEncapsulation compoundCY 221/HY 2966: . Housing: PBT/stainless steel. Encapsulation compound: CY 221/HY 2966. Installation: non-flush. Distance between two headsMultiplex on: ≥ 30 mm Multiplex off: ≥ 80 mm: . Distance between two heads: Multiplex on: ≥ 30 mm Multiplex off: ≥ 80 mm. Mass: approx. 40 g. Dimensions: . Length66 mmDiameter18 mm: . Length: 66 mm. Diameter: 18 mm

The post Pepperl Fuchs IQH1-18GM-V1 appeared first on CentralXL | Industrial Marketplace.

RFID Read/Write Devices Archives - CentralXL | Industrial Marketplace

Pepperl Fuchs IQH1-F61-V1

Pepperl Fuchs IQH1-18GM-V1