Positioning Systems Archives - CentralXL | Industrial Marketplace

Pepperl Fuchs WCS3B-LS610

sales@partnerplc.com — Tue, 20 Jan 2026 13:53:07 +0000

Read head. PROFINET interface, Non-contact, absolute position encoder, Automatic detection of dirt accumulation, Output of position and speed. Passage speed: ≤ 12.5 m/s. Measuring length: max. 314.5 m. Free tolerances to code rail: horizontal: 31 mm ( ± 15.5 mm )vertical: 28 mm ( ± 14 mm ). Resolution: ± 0.4 mm (1,250 positions/m). MTTFd: 172 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. LED green: PROFINET linkTo: PROFINET connection OK. LED yellow: PROFINET RX/TXFlashing: data transfer. LED red: PROFINET communicationTo: communication error. LED red/green: Status indicationGreen: code rail detected, normal functionRed: system errorFlashing red: no code rail detected. Operating voltage: 10 … 30 V DC. Power consumption: 6 W. Interface type: 100 BASE-TX. Data output code: binary code. Protocol: PROFINET IO Real-Time (RT) Conformance class B. Transfer rate: 100 MBit/s. Emitted interference: EN 61000-6-4:2007+A1:2011. Noise immunity: EN 61000-6-2:2005. Shock resistance: EN 60068-2-27:2009. Vibration resistance: EN 60068-2-6:2008. CSA approval: cCSAus Certified, General Purpose Class 2 power source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Operating temperature: 0 … 60 °C (32 … 140 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Relative humidity: 90 % , noncondensing. Connection type: 8-pin, M12 x 1 connector socket, Y-coded. Cable gland: Max. tightening torque of the cap nut: ≤ 0.4 Nm. Degree of protection: IP54. Material: . HousingABS , PC (Polycarbonate): . Housing: ABS , PC (Polycarbonate). Mass: 500 g. Dimensions: . Height99 mmWidth90 mmLength115 mm: . Height: 99 mm. Width: 90 mm. Length: 115 mm. Ordering information: Mounting plate included with delivery

The post Pepperl Fuchs WCS3B-LS610 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs WCS3B-LS510

sales@partnerplc.com — Tue, 20 Jan 2026 13:53:05 +0000

Read head. Read head with EtherNet/IP interface, Non-contact, absolute position encoder, Output of position and speed, Automatic detection of dirt accumulation, Unicast communication, A shared connection for supply and Ethernet. Passage speed: ≤ 12.5 m/s. Measuring length: max. 314.5 m. Free tolerances to code rail: horizontal: 31 mm ( ± 15.5 mm )vertical: 28 mm ( ± 14 mm ). Resolution: ± 0.4 mm (1,250 positions/m). MTTFd: 172 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. LED green: ETHERNET linkTo: ETHERNET connection OK. LED yellow: ETHERNET Bus ActivityFlashing: data transfer. LED red: ETHERNET communicationTo: communication error. LED red/green: Status indicationGreen: code rail detected, normal functionRed: system errorFlashing red: no code rail detected. Operating voltage: 10 … 30 V DC. Power consumption: 6 W. Interface type: 100 BASE-TX. Data output code: binary code. Protocol: EtherNet/IP. Transfer rate: 100 MBit/s. Emitted interference: EN 61000-6-4:2007+A1:2011. Noise immunity: EN 61000-6-2:2005. Shock resistance: EN 60068-2-27:2009. Vibration resistance: EN 60068-2-6:2008. CSA approval: cCSAus Certified, General Purpose Class 2 power source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Operating temperature: 0 … 60 °C (32 … 140 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Relative humidity: 90 % , noncondensing. Connection type: 8-pin, M12 x 1 connector socket, Y-coded. Cable gland: Max. tightening torque of the cap nut: ≤ 0.4 Nm. Degree of protection: IP54. Material: . HousingABS , PC (Polycarbonate): . Housing: ABS , PC (Polycarbonate). Mass: 500 g. Dimensions: . Height99 mmWidth90 mmLength115 mm: . Height: 99 mm. Width: 90 mm. Length: 115 mm. Ordering information: Mounting plate included with delivery

The post Pepperl Fuchs WCS3B-LS510 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs WCS3B-LS410

sales@partnerplc.com — Tue, 20 Jan 2026 13:53:03 +0000

Read head. CANopen interface, Non-contact, absolute position encoder, Automatic detection of dirt accumulation, Output of position and speed. Passage speed: ≤ 12.5 m/s. Measuring length: max. 314.5 m. Free tolerances to code rail: horizontal: 31 mm ( ± 15.5 mm )vertical: 28 mm ( ± 14 mm ). Resolution: ± 0.4 mm (1,250 positions/m). MTTFd: 110 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green: power on. Data flow indicator: LED yellow: data communication active. Error indicator: LED red flashing: read head outside of code rail solid on: internal diagnostic test failed. Operating voltage: 10 … 30 V DC. Power consumption: 2 VA. Interface type: CANopen , galvanically isolated. Data output code: binary code. Transfer rate: max. 1 MBit/s. Termination: switchable. Emitted interference: DIN EN 61000-6-4. Noise immunity: DIN EN 61000-6-2. Shock resistance: DIN EN 60068-2-27, half sine 30 g, 18 ms. Vibration resistance: DIN EN 60068-2-6, sine, 5 g, 10 – 2000 Hz, 10 cycles. CSA approval: cCSAus Certified, General Purpose Class 2 power source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Operating temperature: 0 … 60 °C (32 … 140 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Relative humidity: 90 % , noncondensing. Connection type: 5-pin, M12 x 1 connector. Degree of protection: IP54. Material: . HousingABS , PC (Polycarbonate): . Housing: ABS , PC (Polycarbonate). Mass: 500 g. Dimensions: . Height99 mmWidth90 mmLength115 mm: . Height: 99 mm. Width: 90 mm. Length: 115 mm. Ordering information: Mounting plate included with delivery

The post Pepperl Fuchs WCS3B-LS410 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs WCS3B-LS311D

sales@partnerplc.com — Tue, 20 Jan 2026 13:53:01 +0000

Read head. Reading head, SSI interface, Gray code, SSI interface, Non-contact, absolute position encoder, Automatic detection of dirt accumulation, Integrated display module. Passage speed: ≤ 12.5 m/s. Measuring length: max. 314.5 m. Free tolerances to code rail: horizontal: 31 mm ( ± 15.5 mm )vertical: 28 mm ( ± 14 mm ). Resolution: ± 0.4 mm (1,250 positions/m). MTTFd: 182 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green: power on. Data flow indicator: LED yellow: data communication active. Error indicator: LED red flashing: read head outside of code rail solid on: internal diagnostic test failed. Display: Display module, 6-digit adaptable to installation position. Operating voltage: 10 … 30 V DC. Power consumption: 2 VA. Interface type: SSI interface. Data output code: Gray code , 25 bit. Clock frequency: 100 … 1000 kHz. Pause time: ≥ 20 µs double request possible, if tp ≤ 10 µs. Emitted interference: DIN EN 61000-6-4. Noise immunity: DIN EN 61000-6-2. Shock resistance: DIN EN 60068-2-27, half sine 30 g, 18 ms. Vibration resistance: DIN EN 60068-2-6, sine, 5 g, 10 – 2000 Hz, 10 cycles. CSA approval: cCSAus Certified, General Purpose Class 2 power source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Operating temperature: 0 … 60 °C (32 … 140 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Relative humidity: 90 % , noncondensing. Connection type: 8-pin, M12 x 1 connector. Degree of protection: IP54. Material: . HousingABS , PC (Polycarbonate): . Housing: ABS , PC (Polycarbonate). Mass: 500 g. Dimensions: . Height99 mmWidth90 mmLength115 mm: . Height: 99 mm. Width: 90 mm. Length: 115 mm. Ordering information: Mounting plate included with delivery

The post Pepperl Fuchs WCS3B-LS311D appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs WCS3B-LS310D

sales@partnerplc.com — Tue, 20 Jan 2026 13:53:00 +0000

Read head. Reading head, SSI interface, binary code, SSI interface, Non-contact, absolute position encoder, Automatic detection of dirt accumulation, Integrated display module. Passage speed: ≤ 12.5 m/s. Measuring length: max. 314.5 m. Free tolerances to code rail: horizontal: 31 mm ( ± 15.5 mm )vertical: 28 mm ( ± 14 mm ). Resolution: ± 0.4 mm (1,250 positions/m). MTTFd: 182 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green: power on. Data flow indicator: LED yellow: data communication active. Error indicator: LED red flashing: read head outside of code rail solid on: internal diagnostic test failed. Display: Display module, 6-digit adaptable to installation position. Operating voltage: 10 … 30 V DC. Power consumption: 2 VA. Interface type: SSI interface. Data output code: binary code , 25 bit. Clock frequency: 100 … 1000 kHz. Pause time: ≥ 20 µs double request possible, if tp ≤ 10 µs. Emitted interference: DIN EN 61000-6-4. Noise immunity: DIN EN 61000-6-2. Shock resistance: DIN EN 60068-2-27, half sine 30 g, 18 ms. Vibration resistance: DIN EN 60068-2-6, sine, 5 g, 10 – 2000 Hz, 10 cycles. CSA approval: cCSAus Certified, General Purpose Class 2 power source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Operating temperature: 0 … 60 °C (32 … 140 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Relative humidity: 90 % , noncondensing. Connection type: 8-pin, M12 x 1 connector. Degree of protection: IP54. Material: . HousingABS , PC (Polycarbonate): . Housing: ABS , PC (Polycarbonate). Mass: 500 g. Dimensions: . Height99 mmWidth90 mmLength115 mm: . Height: 99 mm. Width: 90 mm. Length: 115 mm. Ordering information: Mounting plate included with delivery

The post Pepperl Fuchs WCS3B-LS310D appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs WCS3B-LS246

sales@partnerplc.com — Tue, 20 Jan 2026 13:52:58 +0000

Read head. Read head, RS-485 interface, with RS-485 terminal resistor, RS-485 interface, Non-contact, absolute position encoder, Automatic detection of dirt accumulation. Passage speed: ≤ 12.5 m/s. Measuring length: max. 314.5 m. Free tolerances to code rail: horizontal: 31 mm ( ± 15.5 mm )vertical: 28 mm ( ± 14 mm ). Resolution: ± 0.4 mm (1,250 positions/m). MTTFd: 236 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green: power on. Data flow indicator: LED yellow: data communication active. Error indicator: LED red flashing: read head outside of code rail solid on: internal diagnostic test failed. Operating voltage: 10 … 30 V DC. Power consumption: 2 VA. Interface type: RS 485 interface. Data output code: binary code. Protocol: 3 , with Parity (9 Bit/Byte). Transfer rate: 19.2 kBit/s. Address: 0. Termination: with RS 485 termination. Emitted interference: DIN EN 61000-6-4 , DIN EN 12015. Noise immunity: DIN EN 61000-6-2 , DIN EN 12016. Shock resistance: DIN EN 60068-2-27, half sine 30 g, 18 ms. Vibration resistance: DIN EN 60068-2-6, sine, 5 g, 10 – 2000 Hz, 10 cycles. CSA approval: cCSAus Certified, General Purpose Class 2 power source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Operating temperature: 0 … 60 °C (32 … 140 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Relative humidity: 90 % , noncondensing. Connection type: 5-pin, M12 x 1 connector. Degree of protection: IP54. Material: . HousingABS , PC (Polycarbonate): . Housing: ABS , PC (Polycarbonate). Mass: 500 g. Ordering information: Mounting plate included with delivery

The post Pepperl Fuchs WCS3B-LS246 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs WCS3B-LS221D

sales@partnerplc.com — Tue, 20 Jan 2026 13:52:57 +0000

Read head. Read head, RS-485 interface, with RS-485 terminal resistor, RS-485 interface, Non-contact, absolute position encoder, Automatic detection of dirt accumulation, Integrated display module. Passage speed: ≤ 12.5 m/s. Measuring length: max. 314.5 m. Free tolerances to code rail: horizontal: 31 mm ( ± 15.5 mm )vertical: 28 mm ( ± 14 mm ). Resolution: ± 0.4 mm (1,250 positions/m). MTTFd: 204 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green: power on. Data flow indicator: LED yellow: data communication active. Error indicator: LED red flashing: read head outside of code rail solid on: internal diagnostic test failed. Display: Display module, 6-digit , adaptable to installation position. Operating voltage: 10 … 30 V DC. Power consumption: 2 VA. Interface type: RS 485 interface. Data output code: binary code. Protocol: 1 , 2. Transfer rate: 62.5 kBit/s. Address: 0. Termination: with RS 485 termination. Emitted interference: DIN EN 61000-6-4 , DIN EN 12015. Noise immunity: DIN EN 61000-6-2 , DIN EN 12016. Shock resistance: DIN EN 60068-2-27, half sine 30 g, 18 ms. Vibration resistance: DIN EN 60068-2-6, sine, 5 g, 10 – 2000 Hz, 10 cycles. CSA approval: cCSAus Certified, General Purpose Class 2 power source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Operating temperature: 0 … 60 °C (32 … 140 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Relative humidity: 90 % , noncondensing. Connection type: 5-pin, M12 x 1 connector. Degree of protection: IP54. Material: . HousingABS , PC (Polycarbonate): . Housing: ABS , PC (Polycarbonate). Mass: 500 g. Ordering information: Mounting plate included with delivery

The post Pepperl Fuchs WCS3B-LS221D appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs WCS3B-LS221

sales@partnerplc.com — Tue, 20 Jan 2026 13:52:55 +0000

Read head. Read head, RS-485 interface, with RS-485 terminal resistor, RS-485 interface, Non-contact, absolute position encoder, Automatic detection of dirt accumulation. Passage speed: ≤ 12.5 m/s. Measuring length: max. 314.5 m. Free tolerances to code rail: horizontal: 31 mm ( ± 15.5 mm )vertical: 28 mm ( ± 14 mm ). Resolution: ± 0.4 mm (1,250 positions/m). MTTFd: 236 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green: power on. Data flow indicator: LED yellow: data communication active. Error indicator: LED red flashing: read head outside of code rail solid on: internal diagnostic test failed. Operating voltage: 10 … 30 V DC. Power consumption: 2 VA. Interface type: RS 485 interface. Data output code: binary code. Protocol: 1 , 2. Transfer rate: 62.5 kBit/s. Address: 0. Termination: with RS 485 termination. Emitted interference: DIN EN 61000-6-4 , DIN EN 12015. Noise immunity: DIN EN 61000-6-2 , DIN EN 12016. Shock resistance: DIN EN 60068-2-27, half sine 30 g, 18 ms. Vibration resistance: DIN EN 60068-2-6, sine, 5 g, 10 – 2000 Hz, 10 cycles. CSA approval: cCSAus Certified, General Purpose Class 2 power source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Operating temperature: 0 … 60 °C (32 … 140 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Relative humidity: 90 % , noncondensing. Connection type: 5-pin, M12 x 1 connector. Degree of protection: IP54. Material: . HousingABS , PC (Polycarbonate): . Housing: ABS , PC (Polycarbonate). Mass: 500 g. Ordering information: Mounting plate included with delivery

The post Pepperl Fuchs WCS3B-LS221 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs WCS3-CS70-M1-S-L

sales@partnerplc.com — Tue, 20 Jan 2026 13:52:54 +0000

WCS3 code rail. Code rail, stainless steel, Flexible installation by means of alu profile- or mounting bracket system, High mechanical stability, Suitable for applications with wide temperature variations

The post Pepperl Fuchs WCS3-CS70-M1-S******-L****** appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs WCS3-CS70-L*-S-L

sales@partnerplc.com — Tue, 20 Jan 2026 13:52:53 +0000

WCS3 code rail. Code rail, polyester laminate, Flexible installation by means of alu profile- or mounting bracket system, High chemical resistance, Low weight

The post Pepperl Fuchs WCS3-CS70-L*-S******-L****** appeared first on CentralXL | Industrial Marketplace.