Thru-Beam Sensors Archives - CentralXL | Industrial Marketplace

Pepperl Fuchs OBE25M-R200-S2EP-IO

sales@partnerplc.com — Tue, 20 Jan 2026 13:39:38 +0000

Thru-beam sensor (pair). Medium design with versatile mounting options, IO-Link interface for service and process data, Various frequencies for avoiding mutual interference (cross-talk immunity), Extended temperature range-40 °C … 60 °C, High degree of protection IP69K. Emitter: OBE25M-R200-S-IO. Receiver: OBE25M-R200-2EP-IO. Effective detection range: 0 … 25 m. Threshold detection range: 33 m. Light source: LED. Light type: modulated visible red light. LED risk group labelling: exempt group. Alignment aid: LED red (in receiver lens)illuminated constantly: beam is interrupted,flashes: reaching switching point,off: sufficient operating reserve. Diameter of the light spot: approx. 850 mm at a distance of 25 m. Opening angle: approx. 2 °. Ambient light limit: EN 60947-5-2 : 40000 Lux. MTTFd: 462 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 60 %. Operation indicator: LED green:constantly on – power onflashing (4Hz) – short circuitflashing with short break (1 Hz) – IO-Link mode. Function indicator: Yellow LED:Permanently lit – light path clearPermanently off – object detectedFlashing (4 Hz) – insufficient operating reserve. Control elements: Receiver: light/dark switch. Control elements: Receiver: sensitivity adjustment. Operating voltage: 10 … 30 V DC. Ripple: max. 10 %. No-load supply current: Emitter: ≤ 15 mA Receiver: ≤ 15 mA at 24 V Operating voltage. Protection class: III. Interface type: IO-Link ( via C/Q = BK ). IO-Link revision: 1.1. Device profile: Identification and diagnosisSmart Sensor:Receiver: type 2.4Emitter: -. Device ID: Emitter: 0x111401 (1119233)Receiver: 0x111301 (1118977). Transfer rate: COM2 (38.4 kBit/s). Min. cycle time: 2.3 ms. Process data width: Emitter:Process data input: 0 bitProcess data output: 1 bitReceiver:Process data input: 2 bitProcess data output: 2 bit. SIO mode support: yes. Compatible master port type: A. Test input: emitter deactivation at +UB. Switching type: The switching type of the sensor is adjustable. The default setting is: C/Q – BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q – WH: NPN normally closed / light-on, PNP normally open / dark-on. Signal output: 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Usage category: DC-12 and DC-13. Voltage drop: ≤ 1.5 V DC. Switching frequency: 1000 Hz. Response time: 0.5 ms. Communication interface: IEC 61131-9. Product standard: EN 60947-5-2. UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -40 … 60 °C (-40 … 140 °F) , cable, fixed installation -20 … 60 °C (-4 … 140 °F) , movable cable not appropriate for conveyor chains. Storage temperature: -40 … 70 °C (-40 … 158 °F). Degree of protection: IP67 / IP69 / IP69K. Connection: 2 m fixed cable. Material: . HousingPC (Polycarbonate)Optical facePMMA: . Housing: PC (Polycarbonate). Optical face: PMMA. Mass: Emitter: approx. 73 g receiver: approx. 73 g. Dimensions: . Height50.6 mmWidth15 mmDepth41.7 mm: . Height: 50.6 mm. Width: 15 mm. Depth: 41.7 mm. Cable length: 2 m

The post Pepperl Fuchs OBE25M-R200-S2EP-IO appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs OBE25M-18GM60-SE4

sales@partnerplc.com — Tue, 20 Jan 2026 13:39:37 +0000

Thru-beam sensor (pair). Thru-beam sensor (pair), Strong metallic housing in cylindrical shape M18 x 1, Not sensitive to ambient light, Degree of protection IP67, Very high detection range. Emitter: OBE25M-18GM60-S. Receiver: OBE25M-18GM60-E4. Effective detection range: 0 … 25 m. Threshold detection range: 35 m. Light source: LED. Light type: modulated visible red light. Diameter of the light spot: approx. 110 mm at 1 m. Opening angle: approx. 2.9 °. Optical face: frontal. Ambient light limit: EN 60947-5-2 10000 Lux. MTTFd: 564 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green:on – power onflashing (4 Hz) – short circuit. Function indicator: Receiver: Yellow LED:Permanently lit – light path clearPermanently off – object detectedFlashing (4 Hz) – insufficient operating reserve. Control elements: light/dark on electrically switchable. Operating voltage: 10 … 30 V DC. Ripple: max. 10 %. No-load supply current: < 25 mA. Protection class: III. Switching type: The switching type of the sensor is adjustable. The default setting is: Q – Pin4: NPN output / dark-on L/D-On – WH: Low-active input. Signal output: 1 NPN output, short-circuit protected, reverse polarity protected, open collector. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Voltage drop: ≤ 2 V DC. Switching frequency: 500 Hz. Response time: ≤ 1 ms. Product standard: EN 60947-5-2. UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1. Ambient temperature: -40 … 60 °C (-40 … 140 °F). Storage temperature: -40 … 70 °C (-40 … 158 °F). Degree of protection: IP67. Connection: 2 m fixed cable. Material: . Housingbrass, nickel-platedOptical facePMMACablePVC: . Housing: brass, nickel-plated. Optical face: PMMA. Cable: PVC. Mass: approx. 70 g per device. Dimensions: . Length60 mmDiameter18 mmThread sizeM18: . Length: 60 mm. Diameter: 18 mm. Thread size: M18

The post Pepperl Fuchs OBE25M-18GM60-SE4 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs OBE25M-18GM40-SE0

sales@partnerplc.com — Tue, 20 Jan 2026 13:39:35 +0000

Thru-beam sensor (pair). Thru-beam sensor (pair), Strong metallic housing in cylindrical shape M18 x 1, Not sensitive to ambient light, Degree of protection IP67, Very high detection range. Emitter: OBE25M-18GM40-S. Receiver: OBE25M-18GM40-E0. Effective detection range: 0 … 25 m. Threshold detection range: 35 m. Light source: LED. Light type: modulated visible red light. Diameter of the light spot: approx. 110 mm at 1 m. Opening angle: approx. 2.9 °. Optical face: frontal. Ambient light limit: EN 60947-5-2 10000 Lux. MTTFd: 838 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green:on – power onflashing (4 Hz) – short circuit. Function indicator: Receiver: Yellow LED:Permanently lit – light path clearPermanently off – object detectedFlashing (4 Hz) – insufficient operating reserve. Operating voltage: 10 … 30 V DC. Ripple: max. 10 %. No-load supply current: < 25 mA. Protection class: III. Switching type: Q – Pin4: NPN normally open / dark-on. Signal output: 1 NPN output, short-circuit protected, reverse polarity protected, open collector. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Voltage drop: ≤ 1.5 V DC. Switching frequency: 500 Hz. Response time: ≤ 1 ms. Product standard: EN 60947-5-2. UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1. Ambient temperature: -40 … 60 °C (-40 … 140 °F). Storage temperature: -40 … 70 °C (-40 … 158 °F). Degree of protection: IP67. Connection: 2 m fixed cable. Material: . Housingbrass, nickel-platedOptical facePMMACablePVC: . Housing: brass, nickel-plated. Optical face: PMMA. Cable: PVC. Mass: approx. 60 g per device. Dimensions: . Length40 mmDiameter18 mmThread sizeM18: . Length: 40 mm. Diameter: 18 mm. Thread size: M18

The post Pepperl Fuchs OBE25M-18GM40-SE0 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs OBE25M-18GK40-SE0

sales@partnerplc.com — Tue, 20 Jan 2026 13:39:27 +0000

Thru-beam sensor (pair). Thru-beam sensor (pair), Short design in M18 plastic housing, Not sensitive to ambient light, Degree of protection IP67, Very high detection range. Emitter: OBE25M-18GK40-S. Receiver: OBE25M-18GK40-E0. Effective detection range: 0 … 25 m. Threshold detection range: 35 m. Light source: LED. Light type: modulated visible red light. Diameter of the light spot: approx. 110 mm at 1 m. Opening angle: approx. 2.9 °. Optical face: frontal. Ambient light limit: EN 60947-5-2 10000 Lux. MTTFd: 838 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green:on – power onflashing (4 Hz) – short circuit. Function indicator: Receiver: Yellow LED:Permanently lit – light path clearPermanently off – object detectedFlashing (4 Hz) – insufficient operating reserve. Operating voltage: 10 … 30 V DC. Ripple: max. 10 %. No-load supply current: < 25 mA. Protection class: III. Switching type: Q – Pin4: NPN normally open / dark-on. Signal output: 1 NPN output, short-circuit protected, reverse polarity protected, open collector. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Voltage drop: ≤ 1.5 V DC. Switching frequency: 500 Hz. Response time: ≤ 1 ms. Product standard: EN 60947-5-2. UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1. Ambient temperature: -40 … 60 °C (-40 … 140 °F). Storage temperature: -40 … 70 °C (-40 … 158 °F). Degree of protection: IP67. Connection: 2 m fixed cable. Material: . HousingPC (Polycarbonate)Optical facePMMACablePVC: . Housing: PC (Polycarbonate). Optical face: PMMA. Cable: PVC. Mass: approx. 54 g per device. Dimensions: . Length40 mmDiameter18 mmThread sizeM18: . Length: 40 mm. Diameter: 18 mm. Thread size: M18

The post Pepperl Fuchs OBE25M-18GK40-SE0 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs OBE20M-R101-S2EP-IO-L

sales@partnerplc.com — Tue, 20 Jan 2026 13:39:25 +0000

Thru-beam sensor (pair). Laser thru-beam sensor, Miniature design with versatile mounting options, DuraBeam Laser Sensors – durable and employable like an LED, IO-Link interface for service and process data, Various frequencies for avoiding mutual interference (cross-talk immunity), Extended temperature range-40 °C … 60 °C. Emitter: OBE20M-R101-S-IO-L. Receiver: OBE20M-R101-2EP-IO-L. Effective detection range: 0 … 20 m. Threshold detection range: 30 m. Light source: laser diode. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length680 nmBeam divergence> 5 mrad ; d63 5 mrad ; d63 < 2 mm in the range of 250 mm … 750 mm. Pulse length: 1.6 µs. Repetition rate: max. 17.6 kHz. max. pulse energy: 9.6 nJ. Diameter of the light spot: approx. 50 mm at a distance of 20 m. Opening angle: approx. 0.3 °. Ambient light limit: EN 60947-5-2 : 30000 Lux. MTTFd: 440 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green:constantly on – power onflashing (4Hz) – short circuitflashing with short break (1 Hz) – IO-Link mode. Function indicator: Yellow LED:Permanently lit – light path clearPermanently off – object detectedFlashing (4 Hz) – insufficient operating reserve. Control elements: Receiver: light/dark switch. Control elements: Receiver: sensitivity adjustment. Parameterization indicator: IO link communication: green LED goes out briefly (1 Hz). Operating voltage: 10 … 30 V DC. Ripple: max. 10 %. No-load supply current: Emitter: ≤ 13 mA Receiver: ≤ 13 mA at 24 V supply voltage. Protection class: III. Interface type: IO-Link ( via C/Q = pin 4 ). IO-Link revision: 1.1. Device ID: Emitter: 0x110402 (1115138)Reciever: 0x110302 (1114882). Transfer rate: COM2 (38.4 kBit/s). Min. cycle time: 2.3 ms. Process data width: Emitter:Process data output: 2 BitReceiver:Process data input: 2 BitProcess data output: 2 Bit. SIO mode support: yes. Compatible master port type: A. Test input: emitter deactivation at +UB. Switching type: The switching type of the sensor is adjustable. The default setting is: C/Q – BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q – WH: NPN normally closed / light-on, PNP normally open / dark-on. Signal output: 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Usage category: DC-12 and DC-13. Voltage drop: ≤ 1.5 V DC. Switching frequency: 1250 Hz. Response time: 0.4 ms. Communication interface: IEC 61131-9. Product standard: EN 60947-5-2. Laser safety: EN 60825-1:2014. UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1. FDA approval: IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.. Ambient temperature: -40 … 60 °C (-40 … 140 °F) , cable, fixed installation -25 … 60 °C (-13 … 140 °F) , movable cable not appropriate for conveyor chains. Storage temperature: -40 … 70 °C (-40 … 158 °F). Degree of protection: IP67 / IP69 / IP69K. Connection: 2 m fixed cable. Material: . HousingPC (Polycarbonate)Optical facePMMA: . Housing: PC (Polycarbonate). Optical face: PMMA. Mass: Emitter: approx. 10 g receiver: approx. 10 g. Dimensions: . Height33.8 mmWidth13.9 mmDepth18.3 mm: . Height: 33.8 mm. Width: 13.9 mm. Depth: 18.3 mm. Cable length: 2 m

The post Pepperl Fuchs OBE20M-R101-S2EP-IO-L appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs OBE20M-R101-S2EP-IO-0,3M-V31-L

sales@partnerplc.com — Tue, 20 Jan 2026 13:39:24 +0000

Thru-beam sensor (pair). Laser thru-beam sensor, Miniature design with versatile mounting options, DuraBeam Laser Sensors – durable and employable like an LED, IO-Link interface for service and process data, Various frequencies for avoiding mutual interference (cross-talk immunity), Extended temperature range-40 °C … 60 °C. Emitter: OBE20M-R101-S-IO-0,3M-V31-L. Receiver: OBE20M-R101-2EP-IO-0,3M-V31-L. Effective detection range: 0 … 20 m. Threshold detection range: 30 m. Light source: laser diode. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length680 nmBeam divergence> 5 mrad ; d63 5 mrad ; d63 < 2 mm in the range of 250 mm … 750 mm. Pulse length: 1.6 µs. Repetition rate: max. 17.6 kHz. max. pulse energy: 9.6 nJ. Diameter of the light spot: approx. 50 mm at a distance of 20 m. Opening angle: approx. 0.3 °. Ambient light limit: EN 60947-5-2 : 30000 Lux. MTTFd: 440 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green:constantly on – power onflashing (4Hz) – short circuitflashing with short break (1 Hz) – IO-Link mode. Function indicator: Yellow LED:Permanently lit – light path clearPermanently off – object detectedFlashing (4 Hz) – insufficient operating reserve. Control elements: Receiver: light/dark switch. Control elements: Receiver: sensitivity adjustment. Parameterization indicator: IO link communication: green LED goes out briefly (1 Hz). Operating voltage: 10 … 30 V DC. Ripple: max. 10 %. No-load supply current: Emitter: ≤ 13 mA Receiver: ≤ 13 mA at 24 V supply voltage. Protection class: III. Interface type: IO-Link ( via C/Q = pin 4 ). IO-Link revision: 1.1. Device ID: Emitter: 0x110402 (1115138)Reciever: 0x110302 (1114882). Transfer rate: COM2 (38.4 kBit/s). Min. cycle time: 2.3 ms. Process data width: Emitter:Process data output: 2 BitReceiver:Process data input: 2 BitProcess data output: 2 Bit. SIO mode support: yes. Compatible master port type: A. Test input: emitter deactivation at +UB. Switching type: The switching type of the sensor is adjustable. The default setting is: C/Q – Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q – Pin2: NPN normally closed / light-on, PNP normally open / dark-on. Signal output: 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Usage category: DC-12 and DC-13. Voltage drop: ≤ 1.5 V DC. Switching frequency: 1250 Hz. Response time: 0.4 ms. Communication interface: IEC 61131-9. Product standard: EN 60947-5-2. Laser safety: EN 60825-1:2014. UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1. FDA approval: IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. Ambient temperature: -40 … 60 °C (-40 … 140 °F) , cable, fixed installation -25 … 60 °C (-13 … 140 °F) , movable cable not appropriate for conveyor chains. Storage temperature: -40 … 70 °C (-40 … 158 °F). Degree of protection: IP67 / IP69 / IP69K. Connection: fixed cable 300 mm with M8 x 1 male connector; 4-pin. Material: . HousingPC (Polycarbonate)Optical facePMMA: . Housing: PC (Polycarbonate). Optical face: PMMA. Mass: Emitter: approx. 10 g receiver: approx. 10 g. Dimensions: . Height33.8 mmWidth13.9 mmDepth18.3 mm: . Height: 33.8 mm. Width: 13.9 mm. Depth: 18.3 mm. Cable length: 0.3 m

The post Pepperl Fuchs OBE20M-R101-S2EP-IO-0,3M-V31-L appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs OBE20M-R101-S2EP-IO-0,3M-V1-L

sales@partnerplc.com — Tue, 20 Jan 2026 13:39:22 +0000

Thru-beam sensor (pair). Laser thru-beam sensor, Miniature design with versatile mounting options, DuraBeam Laser Sensors – durable and employable like an LED, IO-Link interface for service and process data, Various frequencies for avoiding mutual interference (cross-talk immunity), Extended temperature range-40 °C … 60 °C. Emitter: OBE20M-R101-S-IO-0,3M-V1-L. Receiver: OBE20M-R101-2EP-IO-0,3M-V1-L. Effective detection range: 0 … 20 m. Threshold detection range: 30 m. Light source: laser diode. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length680 nmBeam divergence> 5 mrad ; d63 5 mrad ; d63 < 2 mm in the range of 250 mm … 750 mm. Pulse length: 1.6 µs. Repetition rate: max. 17.6 kHz. max. pulse energy: 9.6 nJ. Diameter of the light spot: approx. 50 mm at a distance of 20 m. Opening angle: approx. 0.3 °. Ambient light limit: EN 60947-5-2 : 30000 Lux. MTTFd: 440 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green:constantly on – power onflashing (4Hz) – short circuitflashing with short break (1 Hz) – IO-Link mode. Function indicator: Yellow LED:Permanently lit – light path clearPermanently off – object detectedFlashing (4 Hz) – insufficient operating reserve. Control elements: Receiver: light/dark switch. Control elements: Receiver: sensitivity adjustment. Parameterization indicator: IO link communication: green LED goes out briefly (1 Hz). Operating voltage: 10 … 30 V DC. Ripple: max. 10 %. No-load supply current: Emitter: ≤ 13 mA Receiver: ≤ 13 mA at 24 V supply voltage. Protection class: III. Interface type: IO-Link ( via C/Q = pin 4 ). IO-Link revision: 1.1. Device ID: Emitter: 0x110402 (1115138)Reciever: 0x110302 (1114882). Transfer rate: COM2 (38.4 kBit/s). Min. cycle time: 2.3 ms. Process data width: Emitter:Process data output: 2 BitReceiver:Process data input: 2 BitProcess data output: 2 Bit. SIO mode support: yes. Compatible master port type: A. Test input: emitter deactivation at +UB. Switching type: The switching type of the sensor is adjustable. The default setting is: C/Q – Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q – Pin2: NPN normally closed / light-on, PNP normally open / dark-on. Signal output: 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Usage category: DC-12 and DC-13. Voltage drop: ≤ 1.5 V DC. Switching frequency: 1250 Hz. Response time: 0.4 ms. Communication interface: IEC 61131-9. Product standard: EN 60947-5-2. Laser safety: EN 60825-1:2014. UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1. FDA approval: IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. Ambient temperature: -40 … 60 °C (-40 … 140 °F) , cable, fixed installation -25 … 60 °C (-13 … 140 °F) , movable cable not appropriate for conveyor chains. Storage temperature: -40 … 70 °C (-40 … 158 °F). Degree of protection: IP67 / IP69 / IP69K. Connection: 300 mm fixed cable with M12 x 1, 4-pin connector. Material: . HousingPC (Polycarbonate)Optical facePMMA: . Housing: PC (Polycarbonate). Optical face: PMMA. Mass: Emitter: approx. 10 g receiver: approx. 10 g. Dimensions: . Height33.8 mmWidth13.9 mmDepth18.3 mm: . Height: 33.8 mm. Width: 13.9 mm. Depth: 18.3 mm. Cable length: 0.3 m

The post Pepperl Fuchs OBE20M-R101-S2EP-IO-0,3M-V1-L appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs OBE20M-R100-SEP-IO-V3-L

sales@partnerplc.com — Tue, 20 Jan 2026 13:39:20 +0000

Thru-beam sensor (pair). Laser thru-beam sensor, Miniature design with versatile mounting options, DuraBeam Laser Sensors – durable and employable like an LED, IO-Link interface for service and process data, Various frequencies for avoiding mutual interference (cross-talk immunity), Extended temperature range-40 °C … 60 °C. Emitter: OBE20M-R100-S-IO-V3-L. Receiver: OBE20M-R100-EP-IO-V3-L. Effective detection range: 0 … 20 m. Threshold detection range: 30 m. Light source: laser diode. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length680 nmBeam divergence> 5 mrad ; d63 5 mrad ; d63 < 2 mm in the range of 250 mm … 750 mm. Pulse length: 1.6 µs. Repetition rate: max. 17.6 kHz. max. pulse energy: 9.6 nJ. Diameter of the light spot: approx. 50 mm at a distance of 20 m. Opening angle: approx. 0.3 °. Ambient light limit: EN 60947-5-2 : 30000 Lux. MTTFd: 440 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green:constantly on – power onflashing (4Hz) – short circuitflashing with short break (1 Hz) – IO-Link mode. Function indicator: Yellow LED:Permanently lit – light path clearPermanently off – object detectedFlashing (4 Hz) – insufficient operating reserve. Control elements: Receiver: light/dark switch. Control elements: Receiver: sensitivity adjustment. Parameterization indicator: IO link communication: green LED goes out briefly (1 Hz). Operating voltage: 10 … 30 V DC. Ripple: max. 10 %. No-load supply current: Emitter: ≤ 13 mA Receiver: ≤ 13 mA at 24 V supply voltage. Protection class: III. Interface type: IO-Link ( via C/Q = pin 4 ). IO-Link revision: 1.1. Device ID: Emitter: 0x110402 (1115138)Reciever: 0x110302 (1114882). Transfer rate: COM2 (38.4 kBit/s). Min. cycle time: 2.3 ms. Process data width: Emitter:Process data output: 2 BitReceiver:Process data input: 2 BitProcess data output: 2 Bit. SIO mode support: yes. Compatible master port type: A. Test input: emitter deactivation at +UB. Switching type: The switching type of the sensor is adjustable. The default setting is: C/Q – Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link. Signal output: 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Usage category: DC-12 and DC-13. Voltage drop: ≤ 1.5 V DC. Switching frequency: 1250 Hz. Response time: 0.4 ms. Communication interface: IEC 61131-9. Product standard: EN 60947-5-2. Laser safety: EN 60825-1:2014. UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1. FDA approval: IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.. Ambient temperature: -40 … 60 °C (-40 … 140 °F). Storage temperature: -40 … 70 °C (-40 … 158 °F). Degree of protection: IP67 / IP69 / IP69K. Connection: M8 x 1 connector, 3-pin. Material: . HousingPC (Polycarbonate)Optical facePMMA: . Housing: PC (Polycarbonate). Optical face: PMMA. Mass: Emitter: approx. 10 g receiver: approx. 10 g. Dimensions: . Height37.1 mmWidth11 mmDepth21.5 mm: . Height: 37.1 mm. Width: 11 mm. Depth: 21.5 mm

The post Pepperl Fuchs OBE20M-R100-SEP-IO-V3-L appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs OBE20M-R100-SEP-IO-0,3M-V3-L

sales@partnerplc.com — Tue, 20 Jan 2026 13:39:18 +0000

Thru-beam sensor (pair). Laser thru-beam sensor, Miniature design with versatile mounting options, DuraBeam Laser Sensors – durable and employable like an LED, IO-Link interface for service and process data, Various frequencies for avoiding mutual interference (cross-talk immunity), Extended temperature range-40 °C … 60 °C. Emitter: OBE20M-R100-S-IO-0,3M-V3-L. Receiver: OBE20M-R100-EP-IO-0,3M-V3-L. Effective detection range: 0 … 20 m. Threshold detection range: 30 m. Light source: laser diode. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length680 nmBeam divergence> 5 mrad ; d63 5 mrad ; d63 < 2 mm in the range of 250 mm … 750 mm. Pulse length: 1.6 µs. Repetition rate: max. 17.6 kHz. max. pulse energy: 9.6 nJ. Diameter of the light spot: approx. 50 mm at a distance of 20 m. Opening angle: approx. 0.3 °. Ambient light limit: EN 60947-5-2 : 30000 Lux. MTTFd: 440 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green:constantly on – power onflashing (4Hz) – short circuitflashing with short break (1 Hz) – IO-Link mode. Function indicator: Yellow LED:Permanently lit – light path clearPermanently off – object detectedFlashing (4 Hz) – insufficient operating reserve. Control elements: Receiver: light/dark switch. Control elements: Receiver: sensitivity adjustment. Parameterization indicator: IO link communication: green LED goes out briefly (1 Hz). Operating voltage: 10 … 30 V DC. Ripple: max. 10 %. No-load supply current: Emitter: ≤ 13 mA Receiver: ≤ 13 mA at 24 V supply voltage. Protection class: III. Interface type: IO-Link ( via C/Q = pin 4 ). IO-Link revision: 1.1. Device ID: Emitter: 0x110402 (1115138)Reciever: 0x110302 (1114882). Transfer rate: COM2 (38.4 kBit/s). Min. cycle time: 2.3 ms. Process data width: Emitter:Process data output: 2 BitReceiver:Process data input: 2 BitProcess data output: 2 Bit. SIO mode support: yes. Compatible master port type: A. Test input: emitter deactivation at +UB. Switching type: The switching type of the sensor is adjustable. The default setting is: C/Q – Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link. Signal output: 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Usage category: DC-12 and DC-13. Voltage drop: ≤ 1.5 V DC. Switching frequency: 1250 Hz. Response time: 0.4 ms. Communication interface: IEC 61131-9. Product standard: EN 60947-5-2. Laser safety: EN 60825-1:2014. UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1. FDA approval: IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.. Ambient temperature: -40 … 60 °C (-40 … 140 °F) , cable, fixed installation -25 … 60 °C (-13 … 140 °F) , movable cable not appropriate for conveyor chains. Storage temperature: -40 … 70 °C (-40 … 158 °F). Degree of protection: IP67 / IP69 / IP69K. Connection: 300 mm fixed cable with M8 x 1, 3-pin connector. Material: . HousingPC (Polycarbonate)Optical facePMMA: . Housing: PC (Polycarbonate). Optical face: PMMA. Mass: Emitter: approx. 10 g receiver: approx. 10 g. Dimensions: . Height37.1 mmWidth11 mmDepth21.5 mm: . Height: 37.1 mm. Width: 11 mm. Depth: 21.5 mm. Cable length: 0.3 m

The post Pepperl Fuchs OBE20M-R100-SEP-IO-0,3M-V3-L appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs OBE20M-R100-S2EP-IO-V31-L

sales@partnerplc.com — Tue, 20 Jan 2026 13:39:15 +0000

Thru-beam sensor (pair). Laser thru-beam sensor, Miniature design with versatile mounting options, DuraBeam Laser Sensors – durable and employable like an LED, IO-Link interface for service and process data, Various frequencies for avoiding mutual interference (cross-talk immunity), Extended temperature range-40 °C … 60 °C. Emitter: OBE20M-R100-S-IO-V31-L. Receiver: OBE20M-R100-2EP-IO-V31-L. Effective detection range: 0 … 20 m. Threshold detection range: 30 m. Light source: laser diode. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length680 nmBeam divergence> 5 mrad ; d63 5 mrad ; d63 < 2 mm in the range of 250 mm … 750 mm. Pulse length: 1.6 µs. Repetition rate: max. 17.6 kHz. max. pulse energy: 9.6 nJ. Diameter of the light spot: approx. 50 mm at a distance of 20 m. Opening angle: approx. 0.3 °. Ambient light limit: EN 60947-5-2 : 30000 Lux. MTTFd: 440 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green:constantly on – power onflashing (4Hz) – short circuitflashing with short break (1 Hz) – IO-Link mode. Function indicator: Yellow LED:Permanently lit – light path clearPermanently off – object detectedFlashing (4 Hz) – insufficient operating reserve. Control elements: Receiver: light/dark switch. Control elements: Receiver: sensitivity adjustment. Parameterization indicator: IO link communication: green LED goes out briefly (1 Hz). Operating voltage: 10 … 30 V DC. Ripple: max. 10 %. No-load supply current: Emitter: ≤ 13 mA Receiver: ≤ 13 mA at 24 V supply voltage. Protection class: III. Interface type: IO-Link ( via C/Q = pin 4 ). IO-Link revision: 1.1. Device ID: Emitter: 0x110402 (1115138)Reciever: 0x110302 (1114882). Transfer rate: COM2 (38.4 kBit/s). Min. cycle time: 2.3 ms. Process data width: Emitter:Process data output: 2 BitReceiver:Process data input: 2 BitProcess data output: 2 Bit. SIO mode support: yes. Compatible master port type: A. Test input: emitter deactivation at +UB. Switching type: The switching type of the sensor is adjustable. The default setting is: C/Q – Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q – Pin2: NPN normally closed / light-on, PNP normally open / dark-on. Signal output: 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Usage category: DC-12 and DC-13. Voltage drop: ≤ 1.5 V DC. Switching frequency: 1250 Hz. Response time: 0.4 ms. Communication interface: IEC 61131-9. Product standard: EN 60947-5-2. Laser safety: EN 60825-1:2014. UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1. FDA approval: IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.. Ambient temperature: -40 … 60 °C (-40 … 140 °F). Storage temperature: -40 … 70 °C (-40 … 158 °F). Degree of protection: IP67 / IP69 / IP69K. Connection: M8 x 1 connector, 4-pin. Material: . HousingPC (Polycarbonate)Optical facePMMA: . Housing: PC (Polycarbonate). Optical face: PMMA. Mass: Emitter: approx. 10 g receiver: approx. 10 g. Dimensions: . Height44.5 mmWidth11 mmDepth21.5 mm: . Height: 44.5 mm. Width: 11 mm. Depth: 21.5 mm

The post Pepperl Fuchs OBE20M-R100-S2EP-IO-V31-L appeared first on CentralXL | Industrial Marketplace.