Print Mark Sensors Archives - CentralXL | Industrial Marketplace

Pepperl Fuchs OBP120-R100-2EP-IO-V31-L

sales@partnerplc.com — Tue, 20 Jan 2026 13:39:45 +0000

Trigger marks sensor. Laser trigger marks sensor, Miniature design with versatile mounting options, For detecting black trigger marks on a white background, DuraBeam Laser Sensors – durable and employable like an LED, Extended temperature range-40 °C … 60 °C, High degree of protection IP69K. Detection range: 25 … 120 mm. Adjustment range: 25 … 120 mm. Reference target: standard white, 100 mm x 100 mm. Light source: laser diode. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length680 nmBeam divergence> 5 mrad d63 5 mrad d63 < 1 mm in the range of 50 mm … 250 mm. Pulse length: 1.6 µs. Repetition rate: approx. 28.5 kHz. max. pulse energy: 10.4 nJ. Optical resolution: Trigger mark [black, 6%] of 1 mm-wide on a white background [white, 90%]; Contrast difference of min. 50%. Diameter of the light spot: < 1 mm at a distance of 60 mm. Opening angle: approx. 0.3 °. Ambient light limit: EN 60947-5-2 : 40000 Lux. Teach-in: static and dynamic Teach-In. MTTFd: 560 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green:constantly on – power onflashing (4Hz) – short circuitflashing with short break (1 Hz) – IO-Link mode. Function indicator: LED yellow:constantly on – object detectedconstantly off – object not detected. Control elements: Teach-In key. Control elements: 5-step rotary switch for operating modes selection. Rated operating voltage: 10 … 30 V DC. Ripple: max. 10 %. No-load supply current: < 20 mA at 24 V supply voltage. Protection class: III. Interface type: IO-Link ( via C/Q = pin 4 ). IO-Link revision: 1.1. Device profile: Smart Sensor. Device ID: 0x110C01 (1117185). Transfer rate: COM2 (38.4 kBit/s). Min. cycle time: 2.3 ms. Process data width: Process data input 1 BitProcess data output 2 Bit. SIO mode support: yes. Compatible master port type: A. Switching type: The switching type of the sensor is adjustable. The default setting is: C/Q – Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link /Q – Pin2: NPN normally closed / dark-on, PNP normally open / light-on. Signal output: 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Usage category: DC-12 and DC-13. Voltage drop: ≤ 1.5 V DC. Switching frequency: 3300 Hz. Response time: 125 µs. Communication interface: IEC 61131-9. Product standard: EN 60947-5-2. Laser safety: EN 60825-1:2014. Protection class: . Rated insulation voltageUi30 VRated impulse withstand voltageUimp800 V: Ui. Rated insulation voltage: 30 V. Rated impulse withstand voltage: 800 V. UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1. FDA approval: IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.. Ambient temperature: -40 … 60 °C (-40 … 140 °F). Storage temperature: -40 … 70 °C (-40 … 158 °F). Pollution degree: 3. Degree of protection: IP67 / IP69 / IP69K. Connection: M8 x 1 connector, 4-pin. Material: . HousingPC (Polycarbonate)Optical facePMMA: . Housing: PC (Polycarbonate). Optical face: PMMA. Mass: approx. 10 g. Dimensions: . Height44.5 mmWidth11 mmDepth21.5 mm: . Height: 44.5 mm. Width: 11 mm. Depth: 21.5 mm

The post Pepperl Fuchs OBP120-R100-2EP-IO-V31-L appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs DK21-9,5/110/124

sales@partnerplc.com — Tue, 20 Jan 2026 13:26:25 +0000

Print mark contrast sensor. Print mark contrast sensor, 9.5 mm detection range, RGB light with rectangular light spot, external Teach-in, push-pull output, M12 plug, Diffuse mode sensor for recording any print mark, Dynamic TEACH-IN: automatic switching threshold adaptation with one key pressure, Optical system exchangeable by 90°, 30 µs response time, suitable for extremely rapid scanning processes, 3 emitter colors: green, red and blue. Sensor range: 9.5 mm ± 3 mm. Light source: LED. Light type: Visible green/red/blue, modulated light. Light spot representation: rectangular 1 mm x 4 mm. Angle deviation: max. ± 3°. Ambient light limit: . Continuous light7000 Lux: . Continuous light: 7000 Lux. Teach-in: Dynamic Teach-In. MTTFd: 650 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Function indicator: LED yellow; switching operation: lights up if print mark is detectedAlarm display: flashing quickly, if no safe operation is possible. Control elements: Teach-In key. Operating voltage: 10 … 30 V DC. Ripple: 10 %. No-load supply current: ≤ 60 mA. Function input: Teach-In input. Signal output: Push-pull output, short-circuit protected, reverse polarity protected. Switching voltage: PNP: ≥ (+UB -2.5 V) , NPN: ≤ 1.5 V. Switching current: max. 200 mA. Switching frequency: 16.5 kHz. Response time: 30 µs. Product standard: EN 60947-5-2. Standard conformity: . Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directionsVibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions: . Shock and impact resistance: IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions. Vibration resistance: IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -20 … 60 °C (-4 … 140 °F). Storage temperature: -20 … 75 °C (-4 … 167 °F). Degree of protection: IP67. Connection: 5-pin, M12 x 1 connector. Material: . HousingPC (glass-fiber-reinforced Makrolon)Optical faceglass: . Housing: PC (glass-fiber-reinforced Makrolon). Optical face: glass. Mass: 200 g. Dimensions: . Height85.6 mmWidth33 mmDepth60.8 mm: . Height: 85.6 mm. Width: 33 mm. Depth: 60.8 mm

The post Pepperl Fuchs DK21-9,5/110/124 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs DK21-25/110/124

sales@partnerplc.com — Tue, 20 Jan 2026 13:26:24 +0000

Print mark contrast sensor. Print mark contrast sensor, 25 mm detection range, RGB light with rectangular light spot, external Teach-in, push-pull output, M12 plug, Diffuse mode sensor for recording any print mark, Dynamic TEACH-IN: automatic switching threshold adaptation with one key pressure, Optical system exchangeable by 90°, 30 µs response time, suitable for extremely rapid scanning processes, 3 emitter colors: green, red and blue. Sensor range: 25 mm ± 6 mm. Light source: LED. Light type: Visible green/red/blue, modulated light. Light spot representation: 2 mm x 8.5 mm. Angle deviation: max. ± 3°. Ambient light limit: . Continuous light7000 Lux: . Continuous light: 7000 Lux. Teach-in: Dynamic Teach-In. MTTFd: 650 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Function indicator: LED yellow; switching operation: lights up if print mark is detectedAlarm display: flashing quickly, if no safe operation is possible. Control elements: Teach-In key. Operating voltage: 10 … 30 V DC. Ripple: 10 %. No-load supply current: ≤ 60 mA. Function input: Teach-In input. Signal output: Push-pull output, short-circuit protected, reverse polarity protected. Switching voltage: PNP: ≥ (+UB -2.5 V) , NPN: ≤ 1.5 V. Switching current: max. 200 mA. Switching frequency: 16.5 kHz. Response time: 30 µs. Product standard: EN 60947-5-2. Standard conformity: . Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directionsVibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions: . Shock and impact resistance: IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions. Vibration resistance: IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -20 … 60 °C (-4 … 140 °F). Storage temperature: -20 … 75 °C (-4 … 167 °F). Degree of protection: IP67. Connection: 5-pin, M12 x 1 connector. Material: . HousingPC (glass-fiber-reinforced Makrolon)Optical faceglass: . Housing: PC (glass-fiber-reinforced Makrolon). Optical face: glass. Mass: 200 g. Dimensions: . Height85.6 mmWidth33 mmDepth60.8 mm: . Height: 85.6 mm. Width: 33 mm. Depth: 60.8 mm

The post Pepperl Fuchs DK21-25/110/124 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs DK20-9,5/B/110/124

sales@partnerplc.com — Tue, 20 Jan 2026 13:26:22 +0000

Print mark contrast sensor. Print mark contrast sensor, 9.5 mm detection range, RGB light with circular light spot, light/dark on, external Teach-in, push-pull output, M12 plug, Diffuse mode sensor for recording any print mark, Static teach-in: automatic switching threshold adaptation, Optical system exchangeable by 90°, 30 µs response time, suitable for extremely rapid scanning processes, 3 emitter colors: green, red and blue. Sensor range: 9.5 mm ± 3 mm. Light source: LED. Light type: Visible green/red/blue, modulated light. Light spot representation: Light spot diameter 1.5 mm. Angle deviation: max. ± 3°. Ambient light limit: . Continuous light7000 Lux: . Continuous light: 7000 Lux. Teach-in: static Teach-In. MTTFd: 650 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Function indicator: LED yellow; switching operation: lights up if print mark is detectedTeach-In operation: flashing slowlyalarm display: flashing quickly, if no safe operation is possible. Control elements: Teach-In key. Operating voltage: 10 … 30 V DC. Ripple: 10 %. No-load supply current: ≤ 70 mA. Function input: Teach-In input. Switching type: light/dark on switchable, results from the order of the Teach-In. Signal output: Push-pull output, short-circuit protected, reverse polarity protected. Switching voltage: PNP: ≥ (+UB -2.5 V) , NPN: ≤ 1.5 V. Switching current: max. 200 mA. Switching frequency: 16.5 kHz. Response time: 30 µs. Product standard: EN 60947-5-2. Standard conformity: . Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directionsVibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions: . Shock and impact resistance: IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions. Vibration resistance: IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions. UL approval: cULus Listed , Class 2 power source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -20 … 60 °C (-4 … 140 °F). Storage temperature: -20 … 75 °C (-4 … 167 °F). Degree of protection: IP67. Connection: 5-pin, M12 x 1 connector. Material: . HousingPC (glass-fiber-reinforced Makrolon)Optical faceglass: . Housing: PC (glass-fiber-reinforced Makrolon). Optical face: glass. Mass: 200 g. Dimensions: . Height85.6 mmWidth33 mmDepth60.8 mm: . Height: 85.6 mm. Width: 33 mm. Depth: 60.8 mm

The post Pepperl Fuchs DK20-9,5/B/110/124 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs DK20-9,5/A/110/124

sales@partnerplc.com — Tue, 20 Jan 2026 13:26:21 +0000

Print mark contrast sensor. Print mark contrast sensor, 9.5 mm detection range, RGB light with rectangular light spot, light/dark on, external Teach-in, push-pull output, M12 plug, Diffuse mode sensor for recording any print mark, Static teach-in: automatic switching threshold adaptation, Optical system exchangeable by 90°, 30 µs response time, suitable for extremely rapid scanning processes, 3 emitter colors: green, red and blue. Sensor range: 9.5 mm ± 3 mm. Light source: LED. Light type: Visible green/red/blue, modulated light. Light spot representation: 1 mm x 4 mm , light spot perpendicular to housing. Angle deviation: max. ± 3°. Ambient light limit: . Continuous light7000 Lux: . Continuous light: 7000 Lux. Teach-in: static Teach-In. MTTFd: 650 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Function indicator: LED yellow; switching operation: lights up if print mark is detectedTeach-In operation: flashing slowlyalarm display: flashing quickly, if no safe operation is possible. Control elements: Teach-In key. Operating voltage: 10 … 30 V DC. Ripple: 10 %. No-load supply current: ≤ 70 mA. Function input: Teach-In input. Switching type: light/dark on switchable, results from the order of the Teach-In. Signal output: Push-pull output, short-circuit protected, reverse polarity protected. Switching voltage: PNP: ≥ (+UB -2.5 V) , NPN: ≤ 1.5 V. Switching current: max. 200 mA. Switching frequency: 16.5 kHz. Response time: 30 µs. Product standard: EN 60947-5-2. Standard conformity: . Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directionsVibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions: . Shock and impact resistance: IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions. Vibration resistance: IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions. UL approval: cULus Listed , Class 2 power source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -20 … 60 °C (-4 … 140 °F). Storage temperature: -20 … 75 °C (-4 … 167 °F). Degree of protection: IP67. Connection: 5-pin, M12 x 1 connector. Material: . HousingPC (glass-fiber-reinforced Makrolon)Optical faceglass: . Housing: PC (glass-fiber-reinforced Makrolon). Optical face: glass. Mass: 200 g. Dimensions: . Height85.6 mmWidth33 mmDepth60.8 mm: . Height: 85.6 mm. Width: 33 mm. Depth: 60.8 mm

The post Pepperl Fuchs DK20-9,5/A/110/124 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs DK20-9,5/110/124

sales@partnerplc.com — Tue, 20 Jan 2026 13:26:20 +0000

Print mark contrast sensor. Print mark contrast sensor, 9.5 mm detection range, RGB light, light/dark on, external Teach-in, push-pull output, M12 plug, Diffuse mode sensor for recording any print mark, Static teach-in: automatic switching threshold adaptation, Optical system exchangeable by 90°, 30 µs response time, suitable for extremely rapid scanning processes, 3 emitter colors: green, red and blue. Sensor range: 9.5 mm ± 3 mm. Light source: LED. Light type: Visible green/red/blue, modulated light. Light spot representation: 1 mm x 4 mm. Angle deviation: max. ± 3°. Ambient light limit: . Continuous light7000 Lux: . Continuous light: 7000 Lux. Teach-in: static Teach-In. MTTFd: 650 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Function indicator: LED yellow; switching operation: lights up if print mark is detectedTeach-In operation: flashing slowlyalarm display: flashing quickly, if no safe operation is possible. Control elements: Teach-In key. Operating voltage: 10 … 30 V DC. Ripple: 10 %. No-load supply current: ≤ 70 mA. Function input: Teach-In input. Switching type: light/dark on switchable, results from the order of the Teach-In. Signal output: Push-pull output, short-circuit protected, reverse polarity protected. Switching voltage: PNP: ≥ (+UB -2.5 V) , NPN: ≤ 1.5 V. Switching current: max. 200 mA. Switching frequency: 16.5 kHz. Response time: 30 µs. Product standard: EN 60947-5-2. Standard conformity: . Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directionsVibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions: . Shock and impact resistance: IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions. Vibration resistance: IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions. UL approval: cULus Listed , Class 2 power source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -20 … 60 °C (-4 … 140 °F). Storage temperature: -20 … 75 °C (-4 … 167 °F). Degree of protection: IP67. Connection: 5-pin, M12 x 1 connector. Material: . HousingPC (glass-fiber-reinforced Makrolon)Optical faceglass: . Housing: PC (glass-fiber-reinforced Makrolon). Optical face: glass. Mass: 200 g. Dimensions: . Height85.6 mmWidth33 mmDepth60.8 mm: . Height: 85.6 mm. Width: 33 mm. Depth: 60.8 mm

The post Pepperl Fuchs DK20-9,5/110/124 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs DK20-25/A/110/124

sales@partnerplc.com — Tue, 20 Jan 2026 13:26:18 +0000

Print mark contrast sensor. Print mark contrast sensor, 25 mm detection range, RGB light with rectangular light spot, light/dark on, external Teach-in, push-pull output, M12 plug, Diffuse mode sensor for recording any print mark, Static teach-in: automatic switching threshold adaptation, Optical system exchangeable by 90°, 30 µs response time, suitable for extremely rapid scanning processes, 3 emitter colors: green, red and blue. Sensor range: 25 mm ± 6 mm. Light source: LED. Light type: Visible green/red/blue, modulated light. Light spot representation: 2 mm x 8.5 mm , light spot perpendicular to housing. Angle deviation: max. ± 3°. Ambient light limit: . Continuous light7000 Lux: . Continuous light: 7000 Lux. Teach-in: static Teach-In. MTTFd: 650 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Function indicator: LED yellow; switching operation: lights up if print mark is detectedTeach-In operation: flashing slowlyalarm display: flashing quickly, if no safe operation is possible. Control elements: Teach-In key. Operating voltage: 10 … 30 V DC. Ripple: 10 %. No-load supply current: ≤ 70 mA. Function input: Teach-In input. Switching type: light/dark on switchable, results from the order of the Teach-In. Signal output: Push-pull output, short-circuit protected, reverse polarity protected. Switching voltage: PNP: ≥ (+UB -2.5 V) , NPN: ≤ 1.5 V. Switching current: max. 200 mA. Switching frequency: 16.5 kHz. Response time: 30 µs. Product standard: EN 60947-5-2. Standard conformity: . Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directionsVibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions: . Shock and impact resistance: IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions. Vibration resistance: IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions. UL approval: cULus Listed , Class 2 power source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -20 … 60 °C (-4 … 140 °F). Storage temperature: -20 … 75 °C (-4 … 167 °F). Degree of protection: IP67. Connection: 5-pin, M12 x 1 connector. Material: . HousingPC (glass-fiber-reinforced Makrolon)Optical faceglass: . Housing: PC (glass-fiber-reinforced Makrolon). Optical face: glass. Mass: 200 g. Dimensions: . Height85.6 mmWidth33 mmDepth60.8 mm: . Height: 85.6 mm. Width: 33 mm. Depth: 60.8 mm

The post Pepperl Fuchs DK20-25/A/110/124 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs DK20-25/110/124

sales@partnerplc.com — Tue, 20 Jan 2026 13:26:17 +0000

Print mark contrast sensor. Print mark contrast sensor, 25 mm detection range, RGB light, light/dark on, external Teach-in, push-pull output, M12 plug, Diffuse mode sensor for recording any print mark, Static teach-in: automatic switching threshold adaptation, Optical system exchangeable by 90°, 30 µs response time, suitable for extremely rapid scanning processes, 3 emitter colors: green, red and blue. Sensor range: 25 mm ± 6 mm. Light source: LED. Light type: Visible green/red/blue, modulated light. Light spot representation: 2 mm x 8.5 mm. Angle deviation: max. ± 3°. Ambient light limit: . Continuous light7000 Lux: . Continuous light: 7000 Lux. Teach-in: static Teach-In. MTTFd: 650 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Function indicator: LED yellow; switching operation: lights up if print mark is detectedTeach-In operation: flashing slowlyalarm display: flashing quickly, if no safe operation is possible. Control elements: Teach-In key. Operating voltage: 10 … 30 V DC. Ripple: 10 %. No-load supply current: ≤ 70 mA. Function input: Teach-In input. Switching type: light/dark on switchable, results from the order of the Teach-In. Signal output: Push-pull output, short-circuit protected, reverse polarity protected. Switching voltage: PNP: ≥ (+UB -2.5 V) , NPN: ≤ 1.5 V. Switching current: max. 200 mA. Switching frequency: 16.5 kHz. Response time: 30 µs. Product standard: EN 60947-5-2. Standard conformity: . Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directionsVibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions: . Shock and impact resistance: IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions. Vibration resistance: IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions. UL approval: cULus Listed , Class 2 power source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -20 … 60 °C (-4 … 140 °F). Storage temperature: -20 … 75 °C (-4 … 167 °F). Degree of protection: IP67. Connection: 5-pin, M12 x 1 connector. Material: . HousingPC (glass-fiber-reinforced Makrolon)Optical faceglass: . Housing: PC (glass-fiber-reinforced Makrolon). Optical face: glass. Mass: 200 g. Dimensions: . Height85.6 mmWidth33 mmDepth60.8 mm: . Height: 85.6 mm. Width: 33 mm. Depth: 60.8 mm

The post Pepperl Fuchs DK20-25/110/124 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs DK12-11/A/124/136

sales@partnerplc.com — Tue, 20 Jan 2026 13:26:15 +0000

Print mark contrast sensor. Print mark contrast sensor, 11 mm detection range, RGB light perpendicular to the longitudinal direction of the housing, light/dark ON, external Teach-In, 2 push-pull outputs, M12 plug, Diffuse mode sensor for recording any print mark, Teach-in, static and dynamic, 50 µs response time, suitable for extremely rapid scanning processes, 3 emitter colors: green, red and blue. Sensor range: 11 mm ± 2 mm. Light source: 3 LEDs (R,G,B). Light type: Visible green/red/blue, modulated light. Light spot representation: 3 mm x 1 mm , light spot perpendicular to housing. Angle deviation: max. ± 3°. Teach-in: static and dynamic Teach-In. MTTFd: 750 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 60 %. Operation indicator: LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz). Function indicator: 2 LEDs yellow, light up in case of detection. Teach-in indicator: Teach-In mark: LED green/yellow equiphase flashing; 2,5 Hz . Teach-In background: LED green/yellow non equiphase flashing; 2,5 Hz . Teach-In dynamic: LED green/yellow equiphase flashing; 1.0 Hz . Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz .. Control elements: Teach-In rotary switch for Switching operation, Teach-In mark, Teach-In background and dynamic Teach-In. Operating voltage: 10 … 30 V DC. Ripple: 10 %. No-load supply current: ≤ 80 mA. Function input: Ext. Teach-In input (ET). Switching type: light/dark on. Signal output: 2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA. Switching frequency: 10 kHz. Response time: 50 µs. Product standard: EN 60947-5-2. Protection class: II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1. UL approval: cULus Listed , Class 2 power source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -20 … 60 °C (-4 … 140 °F). Storage temperature: -40 … 75 °C (-40 … 167 °F). Degree of protection: IP67. Connection: Metal connector, M12, 5-pin, 90° rotatable. Material: . HousingFrame: nickel plated, die cast zinc, Laterals: glass-fiber reinforced plastic PCOptical facePlastic pane: . Housing: Frame: nickel plated, die cast zinc, Laterals: glass-fiber reinforced plastic PC. Optical face: Plastic pane. Mass: 60 g. Dimensions: . Height49 mmWidth41.5 mmDepth15 mm: . Height: 49 mm. Width: 41.5 mm. Depth: 15 mm

The post Pepperl Fuchs DK12-11/A/124/136 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs DK12-11/124/136

sales@partnerplc.com — Tue, 20 Jan 2026 13:26:14 +0000

Print mark contrast sensor. Print mark contrast sensor, 11 mm detection range, RGB light parallel with the longitudinal direction of the housing, light/dark ON, external Teach-In, 2 push-pull outputs, M12 plug, Diffuse mode sensor for recording any print mark, Teach-in, static and dynamic, 50 µs response time, suitable for extremely rapid scanning processes, 3 emitter colors: green, red and blue. Sensor range: 11 mm ± 2 mm. Light source: 3 LEDs (R,G,B). Light type: Visible green/red/blue, modulated light. Light spot representation: 1 mm x 3 mm , light spot parallel to housing. Angle deviation: max. ± 3°. Teach-in: static and dynamic Teach-In. MTTFd: 750 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 60 %. Operation indicator: LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz). Function indicator: 2 LEDs yellow, light up in case of detection. Teach-in indicator: Teach-In mark: LED green/yellow equiphase flashing; 2,5 Hz . Teach-In background: LED green/yellow non equiphase flashing; 2,5 Hz . Teach-In dynamic: LED green/yellow equiphase flashing; 1.0 Hz . Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz .. Control elements: Teach-In rotary switch for Switching operation, Teach-In mark, Teach-In background and dynamic Teach-In. Operating voltage: 10 … 30 V DC. Ripple: 10 %. No-load supply current: ≤ 80 mA. Function input: Ext. Teach-In input (ET). Switching type: light/dark on. Signal output: 2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA. Switching frequency: 10 kHz. Response time: 50 µs. Product standard: EN 60947-5-2. EAC conformity: TR CU 020/2011. Protection class: II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1. UL approval: cULus Listed , Class 2 power source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -20 … 60 °C (-4 … 140 °F). Storage temperature: -40 … 75 °C (-40 … 167 °F). Degree of protection: IP67. Connection: Metal connector, M12, 5-pin, 90° rotatable. Material: . HousingFrame: nickel plated, die cast zinc, Laterals: glass-fiber reinforced plastic PCOptical facePlastic pane: . Housing: Frame: nickel plated, die cast zinc, Laterals: glass-fiber reinforced plastic PC. Optical face: Plastic pane. Mass: 60 g. Dimensions: . Height49 mmWidth41.5 mmDepth15 mm: . Height: 49 mm. Width: 41.5 mm. Depth: 15 mm

The post Pepperl Fuchs DK12-11/124/136 appeared first on CentralXL | Industrial Marketplace.