Photoelectric Sensors Archives - CentralXL | Industrial Marketplace

Pepperl Fuchs VDM28-8-L1-IO/73c/136

sales@partnerplc.com — Tue, 20 Jan 2026 13:52:18 +0000

Distance sensor. Universal distance sensor, measurement to object, IO-Link interface, measuring method PRT, 8 m detection range, red laser light, laser class 1, push-pull output, M12 plug, Distance measurement using object, Measuring method PRT (Pulse Ranging Technology), Accurate, clear, and reproducible measuring results, Red laser as the light emitter, Version with IO-Link interface. Measuring range: 0.2 … 8 m. Reference target: Kodak white (90%). Light source: laser diode typ. service life 85,000 h at Ta = +25 °C. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length660 nmBeam divergence< 1.5 mradPulse lengthapprox. 4 nsRepetition rate250 kHzmax. pulse energy< 1.5 nJ: . Note: LASER LIGHT , DO NOT STARE INTO BEAM. Laser class: 1. Wave length: 660 nm. Beam divergence: < 1.5 mrad. Pulse length: approx. 4 ns. Repetition rate: 250 kHz. max. pulse energy: < 1.5 nJ. Angle deviation: max. ± 2°. Measuring method: Pulse Ranging Technology (PRT). Diameter of the light spot: < 10 mm at a distance of 8 m at 20 °C. Ambient light limit: 50000 Lux. MTTFd: 200 a. Mission Time (TM): 10 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green. Function indicator: 2 LEDs yellow for switching state. Teach-in indicator: Teach-In: LED green/yellow equiphase flashing; 2.5 Hz Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz. Control elements: 5-step rotary switch for operating modes selection (threshold setting and operating modes). Control elements: Switch for setting the threshold values. Operating voltage: 10 … 30 V DC / when operating in IO-Link mode: 18 … 30 V. Ripple: 10 % within the supply tolerance. No-load supply current: ≤ 70 mA / 24 V DC. Time delay before availability: < 1.5 s at 20 °C. Interface type: IO-Link. Protocol: IO-Link V1.0. Cycle time: min. 2.3 ms. Mode: COM2 (38.4 kBit/s). Process data width: 16 bit. SIO mode support: yes. Signal output: 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA. Switching frequency: 50 Hz. Response time: 10 ms. Electromagnetic compatibility: EN 61000-6-2, EN 61000-6-4. Laser safety: IEC 60825-1:2014. Absolute accuracy: ± 25 mm. Repeat accuracy: < 5 mm. Protection class: III. UL approval: cULus Listed, Class 2 Power Source, Type 1 enclosure. CCC approval: CCC approval / marking not required for products rated ≤36 V. FDA approval: IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.. Ambient temperature: -30 … 55 °C (-22 … 131 °F). Storage temperature: -30 … 70 °C (-22 … 158 °F). Degree of protection: IP67. Connection: 4-pin, M12 x 1 connector. Material: . HousingplasticOptical facePMMA: . Housing: plastic. Optical face: PMMA. Mass: 90 g. Dimensions: . Height88 mmWidth25.8 mmDepth54.6 mm: . Height: 88 mm. Width: 25.8 mm. Depth: 54.6 mm

The post Pepperl Fuchs VDM28-8-L1-IO/73c/136 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs VDM28-8-L1-IO/73c/110/122

sales@partnerplc.com — Tue, 20 Jan 2026 13:52:16 +0000

Distance sensor. Universal distance sensor, measurement to object, IO-Link interface, measuring method PRT, 8 m detection range, red laser light, laser class 1, push-pull output, analog output, M12 plug, Distance measurement using object, Measuring method PRT (Pulse Ranging Technology), Accurate, clear, and reproducible measuring results, Minimal black-white difference, Red laser as the light emitter. Measuring range: 0.2 … 8 m. Reference target: Kodak white (90%). Light source: laser diode typ. service life 85,000 h at Ta = +25 °C. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length660 nmBeam divergence< 1.5 mradPulse lengthapprox. 4 nsRepetition rate250 kHzmax. pulse energy< 1.5 nJ: . Note: LASER LIGHT , DO NOT STARE INTO BEAM. Laser class: 1. Wave length: 660 nm. Beam divergence: < 1.5 mrad. Pulse length: approx. 4 ns. Repetition rate: 250 kHz. max. pulse energy: < 1.5 nJ. Angle deviation: max. ± 2°. Measuring method: Pulse Ranging Technology (PRT). Diameter of the light spot: < 10 mm at a distance of 8 m at 20 °C. Ambient light limit: 50000 Lux. MTTFd: 200 a. Mission Time (TM): 10 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green. Function indicator: 2 LEDs yellow for switching state. Teach-in indicator: Teach-In: LED green/yellow equiphase flashing; 2.5 Hz Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz. Control elements: 5-step rotary switch for operating modes selection (threshold setting and operating modes). Control elements: Switch for setting the threshold values. Operating voltage: 10 … 30 V DC / when operating in IO-Link mode: 18 … 30 V. Ripple: 10 % within the supply tolerance. No-load supply current: ≤ 70 mA / 24 V DC. Time delay before availability: < 1.5 s at 20 °C. Interface type: IO-Link. Protocol: IO-Link V1.0. Cycle time: min. 2.3 ms. Mode: COM2 (38.4 kBit/s). Process data width: 16 bit. SIO mode support: yes. Signal output: Push-pull output, short-circuit protected, reverse polarity protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA. Measurement output: 1 analog output 4 … 20 mA, short-circuit/overload protected. Switching frequency: 50 Hz. Response time: 10 ms. Electromagnetic compatibility: EN 61000-6-2, EN 61000-6-4. Laser safety: IEC 60825-1:2014. Absolute accuracy: ± 25 mm. Repeat accuracy: < 5 mm. ATEX approval: . Marking: . Marking: . Protection class: III. UL approval: cULus Listed, Class 2 Power Source, Type 1 enclosure. CCC approval: CCC approval / marking not required for products rated ≤36 V. FDA approval: IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.. Ambient temperature: -30 … 55 °C (-22 … 131 °F). Storage temperature: -30 … 70 °C (-22 … 158 °F). Degree of protection: IP67. Connection: 4-pin, M12 x 1 connector. Material: . HousingplasticOptical facePMMA: . Housing: plastic. Optical face: PMMA. Mass: 90 g. Dimensions: . Height88 mmWidth25.8 mmDepth54.6 mm: . Height: 88 mm. Width: 25.8 mm. Depth: 54.6 mm

The post Pepperl Fuchs VDM28-8-L1-IO/73c/110/122 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs VDM28-50-R1-IO/73c/110/122

sales@partnerplc.com — Tue, 20 Jan 2026 13:52:15 +0000

Distance sensor. Universal distance sensor, measurement to reflector, IO-Link interface, measuring method PRT, 50 m detection range, red laser light, laser class 1, push-pull output, analog output, M12 plug, Retroreflective laser distance sensor, Measuring method PRT (Pulse Ranging Technology), Accurate, clear, and reproducible measuring results, Red laser as the light emitter, Version with laser class 1. Measuring range: 0.2 … 50 m. Reference target: OFR-100/100. Light source: laser diode typ. service life 85,000 h at Ta = +25 °C. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length660 nmBeam divergence< 1.5 mradPulse lengthapprox. 4 nsRepetition rate250 kHzmax. pulse energy< 1.5 nJ: . Note: LASER LIGHT , DO NOT STARE INTO BEAM. Laser class: 1. Wave length: 660 nm. Beam divergence: < 1.5 mrad. Pulse length: approx. 4 ns. Repetition rate: 250 kHz. max. pulse energy: < 1.5 nJ. Angle deviation: max. ± 2°. Measuring method: Pulse Ranging Technology (PRT). Diameter of the light spot: < 50 mm at a distance of 50 m at 20 °C. Ambient light limit: 50000 Lux. MTTFd: 200 a. Mission Time (TM): 10 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green. Function indicator: 2 LEDs yellow for switching state. Teach-in indicator: Teach-In: LED green/yellow equiphase flashing; 2.5 Hz Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz. Control elements: 5-step rotary switch for operating modes selection (threshold setting and operating modes). Control elements: Switch for setting the threshold values. Operating voltage: 10 … 30 V DC / when operating in IO-Link mode: 18 … 30 V. Ripple: 10 % within the supply tolerance. No-load supply current: ≤ 70 mA / 24 V DC. Time delay before availability: < 1.5 s at 20 °C. Interface type: IO-Link. Protocol: IO-Link V1.0. Cycle time: min. 2.3 ms. Mode: COM2 (38.4 kBit/s). Process data width: 16 bit. SIO mode support: yes. Signal output: Push-pull output, short-circuit protected, reverse polarity protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA. Measurement output: 1 analog output 4 … 20 mA, short-circuit/overload protected. Switching frequency: 50 Hz. Response time: 10 ms. Electromagnetic compatibility: EN 61000-6-2, EN 61000-6-4. Laser safety: IEC 60825-1:2014. Absolute accuracy: ± 25 mm. Repeat accuracy: < 5 mm. Protection class: III. UL approval: cULus Listed, Class 2 Power Source, Type 1 enclosure. CCC approval: CCC approval / marking not required for products rated ≤36 V. FDA approval: IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.. Ambient temperature: -30 … 55 °C (-22 … 131 °F). Storage temperature: -30 … 70 °C (-22 … 158 °F). Degree of protection: IP67. Connection: 4-pin, M12 x 1 connector. Material: . HousingplasticOptical facePMMA: . Housing: plastic. Optical face: PMMA. Mass: 90 g. Dimensions: . Height88 mmWidth25.8 mmDepth54.6 mm: . Height: 88 mm. Width: 25.8 mm. Depth: 54.6 mm

The post Pepperl Fuchs VDM28-50-R1-IO/73c/110/122 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs VDM18-300/32/105/122

sales@partnerplc.com — Tue, 20 Jan 2026 13:52:07 +0000

Distance sensor. Universal distance sensor, measurement to object, 300 mm detection range, red laser light, laser class 2, PNP output, analog output, control input, M12 plug, Analog output 4 mA … 20 mA, High resolution, Very fast response characteristic, suitable for rapid scanning process. Measuring range: 80 … 300 mm. Light source: laser diode typ. service life 50,000 h at Ta = +40 °C. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class2Wave length650 nm: . Note: LASER LIGHT , DO NOT STARE INTO BEAM. Laser class: 2. Wave length: 650 nm. Light spot representation: approx. 2 mm x 4.5 mm at 300 mm. Measuring method: Laser triangulation. Ambient light limit: ≤ 5000 Lux. Linearity error: 0.25 % of the measuring range. Repeat accuracy: < 0.25 % of the measured value. Resolution: < 0.1 % of the measuring range. Temperature drift: < 0.02 % / °C. Operation indicator: LED green. Function indicator: 2 yellow LEDs: Switching status (each output) , 4 green LEDs: Operating mode. Control elements: Control panel : Adjuster for switch point , Operating mode , Analog output ( S – Set , T – Toggle ). Parameterization indicator: LED red. Operating voltage: 18 … 30 V DC. No-load supply current: ≤ 40 mA at 24 V DC. Protection class: II , rated voltage ≤ 50 V DC. Time delay before availability: ≤ 300 ms. Control input: Laser off (HIGH +UB) Keypad lock (LOW 0 V). Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collector. Switching current: max. 100 mA. Measurement output: 1 analog output 4 … 20 mA, short-circuit/overload protected , Rmax = 500 Ohm. Switching frequency: ≤ 1 kHz. Response time: 0.4 ms. Directive conformity: . EMC Directive 2004/108/ECEN 60947-5-2: . EMC Directive 2004/108/EC: EN 60947-5-2. Standard conformity: . Laser classDIN EN 60825-1:2008, IEC 60825-1:2007: . Laser class: DIN EN 60825-1:2008, IEC 60825-1:2007. UL approval: cULus Listed. Ambient temperature: -10 … 60 °C (14 … 140 °F). Storage temperature: -20 … 80 °C (-4 … 176 °F). Degree of protection: IP67. Connection: 5-pin, M12 x 1 plastic connector. Material: . HousingABS , impact resistantOptical facePMMA: . Housing: ABS , impact resistant. Optical face: PMMA. Mass: approx. 43 g. Dimensions: . Height50 mmWidth17 mmDepth50 mm: . Height: 50 mm. Width: 17 mm. Depth: 50 mm

The post Pepperl Fuchs VDM18-300/32/105/122 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs VDM18-300/20/88/122/151

sales@partnerplc.com — Tue, 20 Jan 2026 13:52:06 +0000

Distance sensor. Universal distance sensor, measurement to object, 300 mm detection range, red laser light, laser class 2, RS485 interface, 2 x PNP outputs, analog output, M12 plug, Analog output 4 mA … 20 mA, High resolution, Very fast response characteristic, suitable for rapid scanning process, Interface RS 485. Measuring range: 80 … 300 mm. Light source: laser diode typ. service life 50,000 h at Ta = +40 °C. Light type: modulated visible red light. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class2Wave length650 nm: . Note: LASER LIGHT , DO NOT STARE INTO BEAM. Laser class: 2. Wave length: 650 nm. Light spot representation: approx. 2 mm x 4.5 mm at 300 mm. Measuring method: Laser triangulation. Ambient light limit: ≤ 5000 Lux. Linearity error: 0.25 % of the measuring range. Repeat accuracy: < 0.25 % of the measured value. Resolution: < 0.1 % of the measuring range. Temperature drift: < 0.02 % / °C. Operation indicator: LED green. Function indicator: 2 yellow LEDs: Switching status (each output) , 4 green LEDs: Operating mode. Control elements: Control panel : Adjuster for switch point , Operating mode , Analog output ( S – Set , T – Toggle ). Parameterization indicator: LED red. Operating voltage: 18 … 30 V DC. No-load supply current: ≤ 40 mA at 24 V DC. Protection class: II , rated voltage ≤ 50 V DC. Time delay before availability: ≤ 300 ms. Interface type: RS-485. Interfaces: RS-485. Signal output: 2 PNP outputs, independent , short-circuit protected, reverse polarity protected. Switching current: max. 100 mA. Measurement output: 1 analog output 4 … 20 mA, short-circuit/overload protected , Rmax = 500 Ohm. Switching frequency: ≤ 1 kHz. Response time: 0.4 ms. Directive conformity: . EMC Directive 2004/108/ECEN 60947-5-2: . EMC Directive 2004/108/EC: EN 60947-5-2. Standard conformity: . Laser classDIN EN 60825-1:2008, IEC 60825-1:2007: . Laser class: DIN EN 60825-1:2008, IEC 60825-1:2007. UL approval: cULus Listed. Ambient temperature: -10 … 60 °C (14 … 140 °F). Storage temperature: -20 … 80 °C (-4 … 176 °F). Degree of protection: IP67. Connection: M12 connector, 8-pin. Material: . HousingABS , impact resistantOptical facePMMA: . Housing: ABS , impact resistant. Optical face: PMMA. Mass: approx. 43 g. Dimensions: . Height50 mmWidth17 mmDepth50 mm: . Height: 50 mm. Width: 17 mm. Depth: 50 mm

The post Pepperl Fuchs VDM18-300/20/88/122/151 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs SU18-16/40a/110/115/126a

sales@partnerplc.com — Tue, 20 Jan 2026 13:44:24 +0000

Fiber optic sensor. Fiber optic sensor for glass fiber optics and plastic fiber optics, Basic line for DIN rail installation, Sleek design, 3 response times selectable, High switching frequency, Self diagnosis function. Sensor range: up to 150 mm (KLR-C02-2,2-2,0-K146). Detection range: up to 450 mm (KLE-C01-2,2-2,0-K116). Light source: LED. Light type: modulated visible red light , 660 nm. Ambient light limit: 10000 Lux. MTTFd: 690 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz). Function indicator: LED yellow: static illumination switching state, flashes when falling short of the operating reserve. Control elements: Potentiometer for setting sensitivity slide switch 2 positions: light/dark switching slide switch 3 positions: timer function – timer off, on delay 40 ms, off-delay 40 ms slide switch 3 positions: operating mode – normal, high speed , high resolution. Operating voltage: 10 … 30 V DC. Ripple: 10 %. No-load supply current: ≤ 30 mA. Stability alarm output: 1 push-pull (4 in 1) output NPN/PNP , short-circuit protected. Switching type: light/dark on, switchable. Signal output: 1 push-pull (4 in 1) output NPN/PNP , short-circuit protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Voltage drop: ≤ 2 V DC at 100 mA ; ≤ 0.7 V at 10 mA. Switching frequency: Standard mode: 3 kHz , High speed mode: 6 kHz , High resolution: 250 Hz. Response time: Standard mode: 160 µs , High speed mode: 80 µs , High resolution: 2 ms. Repeat accuracy: ≤ 0.5 % of adjusted sensor range. Product standard: EN 60947-5-2. UL approval: cULus Listed, Class 2 Power Source, Type 1 enclosure. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -10 … 55 °C (14 … 131 °F). Storage temperature: -20 … 70 °C (-4 … 158 °F). Degree of protection: IP50. Connection: 2 m PVC cable, 4 x 0,14 mm2. Material: . HousingPC: . Housing: PC. Mass: 45 g. Dimensions: . Height34.5 mmWidth9 mmDepth62.3 mm: . Height: 34.5 mm. Width: 9 mm. Depth: 62.3 mm

The post Pepperl Fuchs SU18-16/40a/110/115/126a appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs SU18/16/35/40a/110/115/126a

sales@partnerplc.com — Tue, 20 Jan 2026 13:44:24 +0000

Fiber optic sensor. Fiber optic sensor for glass fiber optics and plastic fiber optics, Basic line for DIN rail installation, High power version, Sleek design, 3 response times selectable, Protected against mutual interference (no cross-talk). Sensor range: up to 460 mm (KLR-C02-2,2-2,0-K146). Detection range: up to 1500 mm (KLE-C01-2,2-2,0-K116). Light source: LED. Light type: modulated visible red light , 640 nm. Ambient light limit: 10000 Lux. MTTFd: 690 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz). Function indicator: LED yellow: static illumination switching state, flashes when falling short of the operating reserve. Control elements: Potentiometer for setting sensitivity slide switch 2 positions: light/dark switching slide switch 3 positions: timer function – timer off, on delay 40 ms, off-delay 40 ms slide switch 3 positions: operating mode – Standard, High Power, Ultra. Operating voltage: 10 … 30 V DC. Ripple: 10 %. No-load supply current: ≤ 30 mA. Stability alarm output: 1 push-pull (4 in 1) output NPN/PNP , short-circuit protected. Switching type: light/dark on, switchable. Signal output: 1 push-pull (4 in 1) output NPN/PNP , short-circuit protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Voltage drop: ≤ 2 V DC at 100 mA ; ≤ 0.7 V at 10 mA. Switching frequency: Standard mode: 3 kHz , High power mode: 1 kHz , Ultra mode: 100 Hz. Response time: Standard mode: 160 µs , High power mode: 500 µs , Ultra mode: 5 ms. Repeat accuracy: ≤ 0.5 % of adjusted sensor range. Product standard: EN 60947-5-2. UL approval: cULus Listed, Class 2 Power Source, Type 1 enclosure. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -10 … 55 °C (14 … 131 °F). Storage temperature: -20 … 70 °C (-4 … 158 °F). Degree of protection: IP50. Connection: 2 m PVC cable, 4 x 0,14 mm2. Material: . HousingPC: . Housing: PC. Mass: 45 g. Dimensions: . Height34.5 mmWidth9 mmDepth62.3 mm: . Height: 34.5 mm. Width: 9 mm. Depth: 62.3 mm

The post Pepperl Fuchs SU18/16/35/40a/110/115/126a appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs RLK39-8-2000-Z/31/40a/116

sales@partnerplc.com — Tue, 20 Jan 2026 13:43:59 +0000

Diffuse mode sensor. Infrared light, Light-on/dark-on, switchable, Timer function, Degree of protection IP54. Detection range: 0 … 2000 mm. Adjustment range: 200 … 2000 mm. Reference target: standard white 200 mm x 200 mm. Light source: IRED. Light type: modulated infrared light. Ambient light limit: IEC / EN 60947-5-2 , 10000 Lux. MTTFd: 803 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Function indicator: LED yellow: switching stateLED red: pre-fault indication. Control elements: Sensing range adjuster, light-on/dark-on changeover switch. Control elements: switch for timer function. Operating voltage: 12 … 240 V DC 24 … 240 V AC (50 … 60 Hz). Ripple: 10 %. No-load supply current: ≤ 50 mA. Protection class: II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 Caution!The protection class 2 is only valid when the terminal compartment is closed. output circuit has basic insulation to control circuit according to IEC/EN 61140. Power consumption: ≤ 3 VA. Time delay before availability: ≤ 300 ms. Switching type: light/dark on. Signal output: 1 relay output. Switching voltage: max. 240 V AC ; 150 V DC. Switching current: max. 3 A. Switching power: DC: max. 90 W AC: max. 750 VA. Switching frequency: ≤ 25 Hz. Response time: ≤ 20 ms. Timer function: On-/off-delay or pulse extension on choice. Product standard: EN 60947-5-2. CCC approval: Certified by China Compulsory Certification (CCC). Approvals: CE. Ambient temperature: -25 … 55 °C (-13 … 131 °F). Storage temperature: -40 … 70 °C (-40 … 158 °F). Degree of protection: IP54. Connection: terminal compartment PG9 , ≤ 0.75 mm2. Material: . HousingPBTOptical facePMMA: . Housing: PBT. Optical face: PMMA. Mass: approx. 110 g. Dimensions: . Height64 mmWidth25 mmDepth75 mm: . Height: 64 mm. Width: 25 mm. Depth: 75 mm. Scope of delivery: Mounting aid

The post Pepperl Fuchs RLK39-8-2000-Z/31/40a/116 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs RLK39-54-Z/31/40a/116

sales@partnerplc.com — Tue, 20 Jan 2026 13:43:58 +0000

Retroreflective sensor. Retroreflective sensor for standard applications, polarization filter, detection range 7 m, red light, timer function, sensitivity adjuster, light/dark on, relay contact output, terminal compartment, Glare protected with polarization filter, Visible red light, Light-on/dark-on, switchable, Timer function, Degree of protection IP54. Effective detection range: 0 … 5 m. Reflector distance: 0.1 … 5 m. Threshold detection range: 6 m. Reference target: H50 reflector. Light source: LED red. Light type: modulated visible red light. Polarization filter: yes. Ambient light limit: IEC / EN 60947-5-2 , 10000 Lux. MTTFd: 803 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Function indicator: LED yellow: switching stateLED red: pre-fault indication. Control elements: Sensing range adjuster, light-on/dark-on changeover switch. Control elements: switch for timer function. Operating voltage: 12 … 240 V DC 24 … 240 V AC (50 … 60 Hz). Ripple: 10 %. No-load supply current: ≤ 50 mA. Protection class: II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 Caution!The protection class 2 is only valid when the terminal compartment is closed. output circuit has basic insulation to control circuit according to IEC/EN 61140. Power consumption: ≤ 3 VA. Time delay before availability: ≤ 300 ms. Switching type: light/dark on. Signal output: 1 relay output. Switching voltage: max. 240 V AC ; 150 V DC. Switching current: max. 3 A. Switching power: DC: max. 90 W AC: max. 750 VA. Switching frequency: ≤ 25 Hz. Response time: ≤ 20 ms. Timer function: On-/off-delay or pulse extension on choice. Product standard: EN 60947-5-2. CCC approval: Certified by China Compulsory Certification (CCC). Approvals: CE. Ambient temperature: -25 … 55 °C (-13 … 131 °F). Storage temperature: -40 … 70 °C (-40 … 158 °F). Degree of protection: IP54. Connection: terminal compartment PG9 , ≤ 0.75 mm2. Material: . HousingPBTOptical facePMMA: . Housing: PBT. Optical face: PMMA. Mass: approx. 110 g. Dimensions: . Height64 mmWidth25 mmDepth75 mm: . Height: 64 mm. Width: 25 mm. Depth: 75 mm. Scope of delivery: Mounting aid , Reflector

The post Pepperl Fuchs RLK39-54-Z/31/40a/116 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs RLK31-8-2500-IR/31/115

sales@partnerplc.com — Tue, 20 Jan 2026 13:43:57 +0000

Diffuse mode sensor. Diffuse mode sensor, plastic housing, 2500 mm adjustable detection range, AC/DC version, infrared light, light on, relay contact output, fixed cable, Operating voltage AC / DC, Highly visible LED, Relay output, 1 potential free alternator, Compact and stable housing, Protection class II. Detection range: 0 … 2500 mm adjustable. Reference target: standard white 200 mm x 200 mm. Light source: IRED. Light type: modulated infrared light , 850 nm. Polarization filter: no. Diameter of the light spot: approx. 50 mm at a distance of 2.5 m. Opening angle: 2 °. Ambient light limit: 50000 Lux ; according to EN 60947-5-2. MTTFd: 790 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green: power on. Function indicator: LED yellow, lights up with receiver lit. Control elements: Sensing range adjuster. Operating voltage: 24 … 240 V AC 12 … 240 V DC. No-load supply current: ≤ 40 mA. Power consumption: ≤ 2 VA. Switching type: light-on. Signal output: Relay, 1 alternator. Switching voltage: max. 240 V AC/DC. Switching current: max. 3 A. Switching power: DC: max. 150 W AC: max. 750 VA. Switching frequency: ≤ 20 Hz. Response time: ≤ 25 ms. Product standard: EN 60947-5-2. Protection class: II , rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 Output circuit basis insulation of input circuit according to EN 50178, rated insulation voltage 240 V AC. CCC approval: Certified by China Compulsory Certification (CCC). Ambient temperature: -25 … 55 °C (-13 … 131 °F). Storage temperature: -40 … 70 °C (-40 … 158 °F). Degree of protection: IP67. Connection: Fixed cable 1.94 m , 5-wire. Material: . HousingPolycarbonateOptical facePMMA: . Housing: Polycarbonate. Optical face: PMMA. Mass: 155 g. Dimensions: . Height62 mmWidth18 mmDepth35 mm: . Height: 62 mm. Width: 18 mm. Depth: 35 mm

The post Pepperl Fuchs RLK31-8-2500-IR/31/115 appeared first on CentralXL | Industrial Marketplace.