Pepperl Fuchs LFL2-CK-U-PUR5-EMS

sales@partnerplc.com — Tue, 20 Jan 2026 13:30:29 +0000

Float Switch. Switch element: microswitch, mercury-free, Limit value detection for fluids, Sleeve design: small diameter, mounting through G1 tap hole possible. Series: LFL2-**-U. Construction type: sleeve design. Contact loading: 250 V AC/3 A; 150 V DC/0.25 A resistive load; 60 V DC/1 A resistive load. Rated insulation voltage: 300 V. Pulse withstand voltage: 4 kV. Electrical life: ≥ 5 x 104 switching cycles. Low voltage: . Directive 2014/35/EUEN 60947-5-1:2004 + Cor.:2005 + A1:2009: . Directive 2014/35/EU: EN 60947-5-1:2004 + Cor.:2005 + A1:2009. Degree of protection: IEC 60529:2001. Description: microswitch with switching ball, change-over contact. Equipment architecture: This device may be used with any sequential circuit, as long as the circuit can support the electrical circuit values of the switching elements.. CCC approval: Certified by China Compulsory Certification (CCC). Installation conditions: . Installation instructionsrange of application and minimum length between mounting and float:≥ 100 mm (4 inch), preferred for fuels, heating oils, oily fluidsmounting:- The float switch is mounted either from sidewards through a cable gland ≥ G1A into the vessel or- by means of a counter weight or rods (e. g. float switch combination) from the top.The pivot of the cable should always be horizontal.: . Installation instructions: range of application and minimum length between mounting and float:≥ 100 mm (4 inch), preferred for fuels, heating oils, oily fluidsmounting:- The float switch is mounted either from sidewards through a cable gland ≥ G1A into the vessel or- by means of a counter weight or rods (e. g. float switch combination) from the top.The pivot of the cable should always be horizontal.. Process conditions: . Process pressure (static pressure)≤ 3 bar (43.5 psi) at 20 °C (68 °F)Density≥ 0.8 g/cm3: . Process pressure (static pressure): ≤ 3 bar (43.5 psi) at 20 °C (68 °F). Density: ≥ 0.8 g/cm3. Ambient temperature: 5 … 70 °C (41 … 158 °F). Storage temperature: -25 … 70 °C (-13 … 158 °F). Altitude: ≤ 2000 m above MSL. Degree of protection: IP68. Cable: . LengthL5 m: L. Length: 5 m. Material: float: PP (Polypropylene)cable: PUR, highly flexible (3 x 0.50 mm2). Switching point: switch angle, measured against the horizontal:- upper switch point 25° ±10°- lower switch point 6° ±6°. Supplementary information: Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs LFL2-CK-U-PUR5-EMS appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs LFL2-BK-U-PUR5-EMS

sales@partnerplc.com — Tue, 20 Jan 2026 13:30:28 +0000

Float Switch. Switch element: microswitch, mercury-free, Limit value detection for fluids, Ball design: high buoyancy. Series: LFL2-**-U. Construction type: ball design. Contact loading: 250 V AC/3 A; 150 V DC/0.25 A resistive load; 60 V DC/1 A resistive load. Rated insulation voltage: 300 V. Pulse withstand voltage: 4 kV. Electrical life: ≥ 5 x 104 switching cycles. Low voltage: . Directive 2014/35/EUEN 60947-5-1:2004 + Cor.:2005 + A1:2009: . Directive 2014/35/EU: EN 60947-5-1:2004 + Cor.:2005 + A1:2009. Degree of protection: IEC 60529:2001. Description: microswitch with switching ball, change-over contact. Equipment architecture: This device may be used with any sequential circuit, as long as the circuit can support the electrical circuit values of the switching elements.. CCC approval: Certified by China Compulsory Certification (CCC). Installation conditions: . Installation instructionsrange of application and minimum length between mounting and float:≥ 100 mm (4 inch), preferred for fuels, heating oils, oily fluidsmounting:The float switch is mounted by means of a counter weight or rods (e. g. float switch combination) from the top.The pivot of the cable should always be horizontal.: . Installation instructions: range of application and minimum length between mounting and float:≥ 100 mm (4 inch), preferred for fuels, heating oils, oily fluidsmounting:The float switch is mounted by means of a counter weight or rods (e. g. float switch combination) from the top.The pivot of the cable should always be horizontal.. Process conditions: . Process pressure (static pressure)≤ 2 bar (29 psi) at 20 °C (68 °F)Density≥ 0.6 g/cm3: . Process pressure (static pressure): ≤ 2 bar (29 psi) at 20 °C (68 °F). Density: ≥ 0.6 g/cm3. Ambient temperature: 5 … 70 °C (41 … 158 °F). Storage temperature: -25 … 70 °C (-13 … 158 °F). Altitude: ≤ 2000 m above MSL. Degree of protection: IP68. Cable: . LengthL5 m: L. Length: 5 m. Material: float: PP (Polypropylene)cable: PUR, highly flexible (3 x 0.50 mm2). Switching point: switch angle, measured against the horizontal:- upper switch point 25° ±10°- lower switch point 6° ±6°. Supplementary information: Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs LFL2-BK-U-PUR5-EMS appeared first on CentralXL | Industrial Marketplace.

Float Switches Archives - CentralXL | Industrial Marketplace

Pepperl Fuchs LFL2-CK-U-PUR5-EMS

Pepperl Fuchs LFL2-BK-U-PUR5-EMS