Signal Conditioners Archives - CentralXL | Industrial Marketplace

Pepperl Fuchs S1SD-1DI-1R

sales@partnerplc.com — Tue, 20 Jan 2026 13:44:10 +0000

Switch Amplifier. 1-channel signal conditioner, 24 V DC supply, Input for 2- or 3-wire sensors or AC/DC voltage sources, Relay contact output, Timer function, Configurable by DIP switches, Connection via screw terminals, Number of channels: 1-channel, Time function, Signal type: Digital Input, Rated voltage: 16.8 … 31.2 V DC, Field device: NAMUR sensor, Field device [2]: volt-free contact, Field device [3]: 2-wire DC sensor, Field device [4]: SN sensor, Field device [5]: S0 sensor, Field device [6]: NPN sensor. Signal type: Digital Input. Connection: Power Bus or terminals 1-, 2+. Rated voltage: 16.8 … 31.2 V DC. Power dissipation: 0.6 W. Power consumption: 1.1 W. Connection side: field side. NAMUR sensor: . Type2-wireConnectionterminals 5+, 6Signalacc. to EN 60947-5-6 (NAMUR)Sensor supply8 VOpen-circuit 6 mAInput impedance1 kΩ: . Type: 2-wire. Connection: terminals 5+, 6. Signal: acc. to EN 60947-5-6 (NAMUR). Sensor supply: 8 V. Open-circuit: 6 mA. Input impedance: 1 kΩ. Mechanical contact: . Type2-wireConnectionterminals 5+, 6Sensor supply15 VExternal supply≤ 32 VSwitching point8 … 10 V / 1.2 … 2.1 mAInput impedance4 kΩ: . Type: 2-wire. Connection: terminals 5+, 6. Sensor supply: 15 V. External supply: ≤ 32 V. Switching point: 8 … 10 V / 1.2 … 2.1 mA. Input impedance: 4 kΩ. SN sensor: . Type2-wireConnectionterminals 5+, 6Sensor supply8 VOpen-circuit 6 mAInput impedance1 kΩ: . Type: 2-wire. Connection: terminals 5+, 6. Sensor supply: 8 V. Open-circuit: 6 mA. Input impedance: 1 kΩ. 2-wire DC sensor: . Type2-wireConnectionterminals 5+, 6Signalacc. to EN 60947-5-2Sensor supply16 V / 25 mA , short-circuit protectedExternal supply≤ 32 VSwitching point2 … 5 mAInput impedance1 kΩ: . Type: 2-wire. Connection: terminals 5+, 6. Signal: acc. to EN 60947-5-2. Sensor supply: 16 V / 25 mA , short-circuit protected. External supply: ≤ 32 V. Switching point: 2 … 5 mA. Input impedance: 1 kΩ. S0 sensor: . Type2-wireConnectionterminals 5+, 6Signalacc. to EN 62053-31 , Type BSensor supply15 VSwitching point0.15 … 2 mAInput impedance4 kΩ: . Type: 2-wire. Connection: terminals 5+, 6. Signal: acc. to EN 62053-31 , Type B. Sensor supply: 15 V. Switching point: 0.15 … 2 mA. Input impedance: 4 kΩ. NPN sensor: . Type3-wireConnectionterminals 5+, 6, 7-Signalacc. to EN 60947-5-2Sensor supply16 V / 25 mA , short-circuit protectedExternal supply≤ 32 VSwitching point3 … 5 VInput impedance4 kΩ: . Type: 3-wire. Connection: terminals 5+, 6, 7-. Signal: acc. to EN 60947-5-2. Sensor supply: 16 V / 25 mA , short-circuit protected. External supply: ≤ 32 V. Switching point: 3 … 5 V. Input impedance: 4 kΩ. PNP sensor: . Type3-wireConnectionterminals 5+, 6, 7-Signalacc. to EN 60947-5-2Sensor supply16 V / 25 mA , short-circuit protectedExternal supply≤ 32 VSwitching point8 … 10 VInput impedance4 kΩ: . Type: 3-wire. Connection: terminals 5+, 6, 7-. Signal: acc. to EN 60947-5-2. Sensor supply: 16 V / 25 mA , short-circuit protected. External supply: ≤ 32 V. Switching point: 8 … 10 V. Input impedance: 4 kΩ. AC/DC voltage source: . Connectionterminals 7, 8Signal24 V AC/DCSwitching point10 … 15 VInput impedance> 680 kΩ: . Connection: terminals 7, 8. Signal: 24 V AC/DC. Switching point: 10 … 15 V. Input impedance: > 680 kΩ. AC/DC voltage source: . Connectionterminals 7, 8Signal115 V AC/DCSwitching point40 … 60 VInput impedance> 680 kΩ: . Connection: terminals 7, 8. Signal: 115 V AC/DC. Switching point: 40 … 60 V. Input impedance: > 680 kΩ. AC/DC voltage source: . Connectionterminals 7, 8Signal230 V AC/DCSwitching point80 … 115 VInput impedance> 680 kΩ: . Connection: terminals 7, 8. Signal: 230 V AC/DC. Switching point: 80 … 115 V. Input impedance: > 680 kΩ. Connection side: control side. Connection: terminals 3, 4:. Output: signal, relay. Contact loading: 253 V AC/2 A/cos φ > 0.7; 126.5 V AC/2 A/cos φ > 0.7; 30 V DC/2 A resistive load. Minimum switch current: 2 mA / 24 V DC. Energized/De-energized delay: ≤ 20 ms / ≤ 20 ms. Mechanical life: 107 switching cycles. Switching frequency: ≤ 10 Hz. Output/power supply: safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min. Input/Other circuits: safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min. Control elements: DIP switch. Configuration: via DIP switches. Labeling: space for labeling at the front. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013 (industrial locations): . Directive 2014/30/EU: EN 61326-1:2013 (industrial locations). Low voltage: . Directive 2014/35/EUEN 61010-1:2010: . Directive 2014/35/EU: EN 61010-1:2010. Degree of protection: IEC 60529:2001. Protection against electrical shock: EN 61010-1:2010. Ambient temperature: -25 … 70 °C (-13 … 158 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Damaging gas: designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3. Degree of protection: IP20. Connection: screw terminals. Core cross section: 0.5 … 2.5 mm2 (20 … 14 AWG). Mass: approx. 60 g. Dimensions: 6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) (W x H x D) , housing type S1. Height97 mmWidth6.2 mmDepth107 mm: . Height: 97 mm. Width: 6.2 mm. Depth: 107 mm. Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs S1SD-1DI-1R appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs S1SD-1AI-2U

sales@partnerplc.com — Tue, 20 Jan 2026 13:44:09 +0000

Isolating Amplifier/Splitter. 1-channel signal conditioner, 24 V DC supply, Input 2-wire transmitters, Input current and voltage sources, Dual output 0/4 mA … 20 mA, 0/1 V … 5 V or 0/2 V … 10 V, Signal splitter (1 input and 2 outputs), Accuracy 0.1 %, Connection via screw terminals, Number of channels: 1-channel, Signal type: Analog input, Rated voltage: 16.8 … 31.2 V DC, Field device: 2-wire transmitter, Signal: 0/4 … 20 mA, Signal [2]: 0/2 … 10 V, Signal: 2 x 0/4 … 20 mA. Signal type: Analog input. Operation time: MTBF: 272 a acc. to SN 29500 stationary continuous operating, average ambient temperature 40 °C (104 °F). Connection: Power Bus or terminals 1-, 2+. Rated voltage: 16.8 … 31.2 V DC. Power dissipation: 0.8 W. Power consumption: 1.4 W. Connection side: field side. Connection: terminals 5+, 6-. Input signal: 0/4 … 20 mA 0/2 … 10 V. Open circuit voltage/short-circuit current: ≤ 22 V / 35 mA. Input resistance: ≤ 25 Ω. Transmission range: linearity range: -1 … 110 %. Available voltage: 16 V at 20 mA. Connection side: control side. Ripple: ≤ 10 mV eff. Output I: . Connectionterminals 3-, 4+Output signal0/1 … 5 V, 0/2 … 10 V , load ≥ 5 kΩ 0/4 … 20 mA , load ≤ 300 Ω: . Connection: terminals 3-, 4+. Output signal: 0/1 … 5 V, 0/2 … 10 V , load ≥ 5 kΩ 0/4 … 20 mA , load ≤ 300 Ω. Output II: . Connectionterminals 7+, 8-Output signal0/1 … 5 V, 0/2 … 10 V , load ≥ 5 kΩ 0/4 … 20 mA , load ≤ 300 Ω: . Connection: terminals 7+, 8-. Output signal: 0/1 … 5 V, 0/2 … 10 V , load ≥ 5 kΩ 0/4 … 20 mA , load ≤ 300 Ω. Accuracy: max. 0.1 % of full-scale value. Influence of ambient temperature: < 100 ppm/K of full-scale value. Frequency range: 0 … 100 Hz. Rise time/fall time: ≤ 3.5 ms. Output/power supply: safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min. Input/Other circuits: safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min. Output I/II: safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min. Labeling: space for labeling at the front. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013 (industrial locations): . Directive 2014/30/EU: EN 61326-1:2013 (industrial locations). Degree of protection: IEC 60529:2001. Protection against electrical shock: EN 61010-1:2010. Ambient temperature: -25 … 70 °C (-13 … 158 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Damaging gas: designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3. Degree of protection: IP20. Connection: screw terminals. Core cross section: 0.5 … 2.5 mm2 (20 … 14 AWG). Mass: approx. 70 g. Dimensions: 6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) (W x H x D) , housing type S1. Height97 mmWidth6.2 mmDepth107 mm: . Height: 97 mm. Width: 6.2 mm. Depth: 107 mm. Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001. Certificate: DEMKO 16 ATEX 1750X. Marking II 3G Ex nA IIC T4 Gc: . Marking: II 3G Ex nA IIC T4 Gc. Directive conformity: . Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-15:2010: . Directive 2014/34/EU: EN 60079-0:2012+A11:2013 , EN 60079-15:2010. UL approval: E106378. IECEx approval: . IECEx certificateIECEx UL 16.0116XIECEx markingEx nA IIC T4 Gc: . IECEx certificate: IECEx UL 16.0116X. IECEx marking: Ex nA IIC T4 Gc. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs S1SD-1AI-2U appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs KFU8-USC-1.D

sales@partnerplc.com — Tue, 20 Jan 2026 13:29:54 +0000

Signal Converter with Trip Value. 1-channel signal conditioner, Universal usage at different power supplies, Scaleable current or voltage input, Current or voltage output, Relay contact output, Configurable by keypad, Line fault detection (LFD), Housing width: 20 mm, Number of channels: 1-channel, Rated voltage: 20 … 90 V DC / 48 … 253 V AC, Type: 1 x relay (change-over contact), Signal: 1 x 0/4 … 20 mA, Signal [2]: 1 x 0/1 … 5 V, Signal [3]: 1 x 0/2 … 10 V, Line fault detection. Signal type: Analog input. Connection: terminals 14, 15. Rated voltage: 20 … 90 V DC / 48 … 253 V AC. Rated current: ≤ 80 mA DC / ≤ 45 mA AC. Power consumption: ≤ 1.6 W / ≤ 2.6 VA. Connection side: field side. Connection: terminals 1+, 3- : mV, V ; terminals 2+, 3- : mA. Input resistance: voltage: 1 MΩ , current: max. 100 Ω. Limit: 30 V. Current: 0 … 20 mA. Voltage: 0 … 10 V / 0 … 60 mV. Resolution: 15 Bit. Connection side: control side. Connection: output I: terminals 10, 11, 12 output II: terminals 7-, 8+, 9-. Output I: signal, relay. Contact loading250 V AC/2 A/cos φ 0.7; 40 V DC/2 AMechanical life2 x 107 switching cyclesEnergized/De-energized delayapprox. 10 ms / approx. 10 ms: . Contact loading: 250 V AC/2 A/cos φ 0.7; 40 V DC/2 A. Mechanical life: 2 x 107 switching cycles. Energized/De-energized delay: approx. 10 ms / approx. 10 ms. Output II: analog. Loadcurrent: max. 550 Ω , voltage: min. 1 kΩAnalog voltage output0/1 … 5 V , 0/2 … 10 VAnalog current output0/4 … 20 mA: . Load: current: max. 550 Ω , voltage: min. 1 kΩ. Analog voltage output: 0/1 … 5 V , 0/2 … 10 V. Analog current output: 0/4 … 20 mA. Deviation: 0.1 % of full-scale value. Resolution/accuracycurrent: 1 µA/20 µAvoltage: 0.5 mV/10 mVmV: 3 µV/60 µVInfluence of ambient temperature0.003 %/K (30 ppm): . Resolution/accuracy: current: 1 µA/20 µAvoltage: 0.5 mV/10 mVmV: 3 µV/60 µV. Influence of ambient temperature: 0.003 %/K (30 ppm). Reaction time: ≥ 150 ms/≤ 300 ms. Input/Output: reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff. Input/power supply: reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff. Output/power supply: reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff. Display elements: display. Control elements: Control panel. Configuration: via operating buttons. Labeling: space for labeling at the front. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013 (industrial locations): . Directive 2014/30/EU: EN 61326-1:2013 (industrial locations). Low voltage: . Directive 2014/35/EUEN 61010-1:2010: . Directive 2014/35/EU: EN 61010-1:2010. Electromagnetic compatibility: NE 21. Degree of protection: IEC 60529. Ambient temperature: -20 … 60 °C (-4 … 140 °F). Degree of protection: IP20. Connection: screw terminals. Mass: 150 g. Dimensions: 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2. Height119 mmWidth20 mmDepth115 mm: . Height: 119 mm. Width: 20 mm. Depth: 115 mm. Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs KFU8-USC-1.D appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs KFU8-UFC-1.D.FA

sales@partnerplc.com — Tue, 20 Jan 2026 13:29:52 +0000

Frequency Converter with Trip Values. 1-channel signal conditioner, Universal usage at different power supplies, Input for 2- or 3-wire sensors, NAMUR sensors or dry contacts, Input frequency 1 mHz … 10 kHz, Current output 0/4 mA … 20 mA, Relay contact and transistor output, Start-up override, Line fault detection (LFD), Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 40 mm, Number of channels: 1-channel, Trip relay, Start-up override, Frequency conversion, Rotation speed monitoring, Pulse divider. Signal type: Digital Input. Safety Integrity Level (SIL): SIL 2. Connection: terminals 23, 24. Rated voltage: 20 … 90 V DC / 48 … 253 V AC 50 … 60 Hz. Power dissipation/power consumption: ≤ 2 W ; 2.5 VA / 2.2 W ; 3 VA. Programming interface: programming socket. Connection side: field side. Connection: Input I: 2-wire sensor: terminals 1+, 3- three wire sensor: terminals 1+, 2- and 3 input II: terminals 13+, 14- start-up override;. Input I: 2- or 3-wire sensor, sensor acc. to EN 60947-5-6 (NAMUR) or mechanical contact. Open circuit voltage/short-circuit current22 V / 40 mAInput resistance4.7 kΩSwitching point/switching hysteresislogic 1: > 2.5 mA ; logic 0: 50 µsInput frequency0.001 … 10000 HzLine fault detectionbreakage I ≤ 0.15 mA; short-circuit I > 4 mA: . Open circuit voltage/short-circuit current: 22 V / 40 mA. Input resistance: 4.7 kΩ. Switching point/switching hysteresis: logic 1: > 2.5 mA ; logic 0: 50 µs. Input frequency: 0.001 … 10000 Hz. Line fault detection: breakage I ≤ 0.15 mA; short-circuit I > 4 mA. Input II: startup override: 1 … 1000 s, adjustable in steps of 1 s. Active/PassiveI > 4 mA (for min. 100 ms) / I 4 mA (for min. 100 ms) / I 0.001 HzMeasuring time 0.001 Hz. Measuring time: < 100 ms. Influence of ambient temperature: 0.003 %/K (30 ppm). Output I, II: . Response delay≤ 200 ms: . Response delay: ≤ 200 ms. Output IV: . Resolution< 10 µAAccuracy< 20 µAInfluence of ambient temperature0.005 %/K (50 ppm): . Resolution: < 10 µA. Accuracy: < 20 µA. Influence of ambient temperature: 0.005 %/K (50 ppm). Input I/other circuits: reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff. Output I, II/other circuits: reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff. Mutual output I, II, III: reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff. Output III/power supply: reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff. Output III/IV: basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 Veff. Output IV/power supply: reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff. Start-up override/power supply: reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff. Interface/power supply: reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff. Interface/output III: basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 Veff. Display elements: LEDs , display. Control elements: Control panel. Configuration: via operating buttons via PACTware. Labeling: space for labeling at the front. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2006: . Directive 2014/30/EU: EN 61326-1:2006. Low voltage: . Directive 2014/35/EUEN 61010-1:2010: . Directive 2014/35/EU: EN 61010-1:2010. Electromagnetic compatibility: NE 21:2006. Degree of protection: IEC 60529:2001. Ambient temperature: -20 … 60 °C (-4 … 140 °F). Degree of protection: IP20. Connection: screw terminals. Mass: 300 g. Dimensions: 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2. Height119 mmWidth40 mmDepth115 mm: . Height: 119 mm. Width: 40 mm. Depth: 115 mm. Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs KFU8-UFC-1.D.FA appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs KFD2-USC-1.D

sales@partnerplc.com — Tue, 20 Jan 2026 13:29:48 +0000

Signal Converter with Trip Value. 1-channel signal conditioner, 24 V DC supply (Power Rail), Scaleable current or voltage input, Current or voltage output, Relay contact output, Configurable by keypad, Line fault detection (LFD), Housing width: 20 mm, Number of channels: 1-channel, Rated voltage: 20 … 30 V DC, Type: 1 x relay (change-over contact), Signal: 1 x 0/4 … 20 mA, Signal [2]: 1 x 0/1 … 5 V, Signal [3]: 1 x 0/2 … 10 V, Line fault detection. Signal type: Analog input. Connection: terminals 14+, 15- or Power Rail. Rated voltage: 20 … 30 V DC. Rated current: ≤ 80 mA DC. Power consumption: ≤ 1.6 W. Connection side: field side. Connection: terminals 1+, 3- : mV, V ; terminals 2+, 3- : mA. Input resistance: voltage: 1 MΩ , current: max. 100 Ω. Limit: 30 V. Current: 0 … 20 mA. Voltage: 0 … 10 V / 0 … 60 mV. Resolution: 15 Bit. Connection side: control side. Connection: output I: terminals 10, 11, 12 output II: terminals 7-, 8+, 9-. Output I: signal, relay. Contact loading250 V AC/2 A/cos φ 0.7; 40 V DC/2 AMechanical life2 x 107 switching cyclesEnergized/De-energized delayapprox. 10 ms / approx. 10 ms: . Contact loading: 250 V AC/2 A/cos φ 0.7; 40 V DC/2 A. Mechanical life: 2 x 107 switching cycles. Energized/De-energized delay: approx. 10 ms / approx. 10 ms. Output II: analog. Loadcurrent: max. 550 Ω , voltage: min. 1 kΩAnalog voltage output0/1 … 5 V , 0/2 … 10 VAnalog current output0/4 … 20 mA: . Load: current: max. 550 Ω , voltage: min. 1 kΩ. Analog voltage output: 0/1 … 5 V , 0/2 … 10 V. Analog current output: 0/4 … 20 mA. Deviation: 0.1 % of full-scale value. Resolution/accuracycurrent: 1 µA/20 µAvoltage: 0.5 mV/10 mVmV: 3 µV/60 µVInfluence of ambient temperature0.003 %/K (30 ppm): . Resolution/accuracy: current: 1 µA/20 µAvoltage: 0.5 mV/10 mVmV: 3 µV/60 µV. Influence of ambient temperature: 0.003 %/K (30 ppm). Reaction time: ≥ 150 ms/≤ 300 ms. Input/Output: reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff. Input/power supply: reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff. Output/power supply: reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff. Display elements: display. Control elements: Control panel. Configuration: via operating buttons. Labeling: space for labeling at the front. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013 (industrial locations): . Directive 2014/30/EU: EN 61326-1:2013 (industrial locations). Low voltage: . Directive 2014/35/EUEN 61010-1:2010: . Directive 2014/35/EU: EN 61010-1:2010. Electromagnetic compatibility: NE 21. Degree of protection: IEC 60529. Ambient temperature: -20 … 60 °C (-4 … 140 °F). Degree of protection: IP20. Connection: screw terminals. Mass: 150 g. Dimensions: 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2. Height119 mmWidth20 mmDepth115 mm: . Height: 119 mm. Width: 20 mm. Depth: 115 mm. Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs KFD2-USC-1.D appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs KFD2-STC5-1.2O

sales@partnerplc.com — Tue, 20 Jan 2026 13:29:38 +0000

SMART Transmitter Power Supply. 1-channel signal conditioner, 24 V DC supply (Power Rail), Input 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources, Signal splitter (1 input and 2 outputs), Dual output 4 mA … 20 mA current sink/current source, Terminals with test points, Up to SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, HART communication, Test sockets, Safety Integrity Level (SIL): SIL 3, Systematic capability (SC): SC 3, Rated voltage: 18 … 30 V DC. Signal type: Analog input. Safety Integrity Level (SIL): SIL 3. Systematic capability (SC): SC 3. Connection: Power Rail or terminals 14+, 15-. Rated voltage: 18 … 30 V DC. Ripple: within the supply tolerance. Power dissipation: ≤ 1 W at maximum load. Power consumption: ≤ 1.7 W at maximum load. Connection side: field side. Connection: terminals 1+, 2-, 3. Input signal: 4 … 20 mA. Open circuit voltage/short-circuit current: terminals 1+, 3: 23 V / 25 mA. Input resistance: max. 265 Ω terminals 2-, 3 , max. 330 Ω terminals 1+, 3. Available voltage: ≥ 16 V at 20 mA ; ≥ 20 V at 4 mA , terminals 1+, 3. Connection side: control side. Connection: terminals 7+, 8-, 9-; 10+, 11-, 12- (sink)terminals 7-, 8+, 9+; 10-, 11+, 12+ (source) see additional information. Load: 0 … 600 Ω. Output signal: 4 … 20 mA (overload > 25 mA). Ripple: max. 50 µA eff. External supply (loop): 2 … 30 V DC If the external voltage is > 19 V, a load ≥ ((V – 19) / 0.02) Ω is required. V represents the value of the external voltage. The internal 250 Ω resistor at terminals 9 and 12 can be used as a load.. Deviation: at 20 °C (68 °F), 4 … 20 mA≤ ± 10 µA incl. calibration, linearity, hysteresis, loads and supply voltage fluctuations. Influence of ambient temperature≤ 0.25 µA/K: . Influence of ambient temperature: ≤ 0.25 µA/K. Frequency range: input in output: bandwidth with 1 mApp signal 0 … 7.5 kHz (-3 dB) output in input: band width with 1 Vss signal 0.3 … 7.5 kHz (-3 dB). Settling time: 200 µs. Rise time/fall time: 100 µs. Input/Output: basic insulation according to IEC 61010-1, rated insulation voltage 300 Veff. Input/power supply: basic insulation according to IEC 61010-1, rated insulation voltage 300 Veff. Output/power supply: functional insulation, rated insulation voltage 50 V AC. Output/Output: functional insulation, rated insulation voltage 50 V AC. Display elements: LED. Labeling: space for labeling at the front. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013 (industrial locations): . Directive 2014/30/EU: EN 61326-1:2013 (industrial locations). Electromagnetic compatibility: NE 21:2012 EN 61326-3-2:2008. Degree of protection: IEC 60529:2001. Protection against electrical shock: UL 61010-1:2012. Ambient temperature: -20 … 70 °C (-4 … 158 °F). Degree of protection: IP20. Connection: screw terminals. Mass: approx. 150 g. Dimensions: 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) (W x H x D) , housing type B2. Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs KFD2-STC5-1.2O appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs KFD2-STC5-1

sales@partnerplc.com — Tue, 20 Jan 2026 13:29:37 +0000

SMART Transmitter Power Supply. 1-channel signal conditioner, 24 V DC supply (Power Rail), Input 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources, Output 4 mA … 20 mA current sink/current source, Terminals with test points, Up to SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, HART communication, Test sockets, Safety Integrity Level (SIL): SIL 2, Systematic capability (SC): SC 3, Rated voltage: 18 … 30 V DC, Field device: 2-wire transmitter. Signal type: Analog input. Safety Integrity Level (SIL): SIL 2. Systematic capability (SC): SC 3. Connection: Power Rail or terminals 14+, 15-. Rated voltage: 18 … 30 V DC. Ripple: within the supply tolerance. Power dissipation: ≤ 1 W at maximum load. Power consumption: ≤ 1.6 W at maximum load. Connection side: field side. Connection: terminals 1+, 2-, 3. Input signal: 4 … 20 mA. Open circuit voltage/short-circuit current: terminals 1+, 3: 23 V / 25 mA. Input resistance: max. 265 Ω terminals 2-, 3 , max. 330 Ω terminals 1+, 3. Available voltage: ≥ 16 V at 20 mA ; ≥ 20 V at 4 mA , terminals 1+, 3. Connection side: control side. Connection: terminals 7+, 8-, 9- (sink) terminals 7-, 8+, 9+ (source) see additional information. Load: 0 … 800 Ω. Output signal: 4 … 20 mA (overload > 25 mA). Ripple: max. 50 µA eff. External supply (loop): 2 … 30 V DC If the external voltage is > 19 V, a load ≥ ((V – 19) / 0.02) Ω is required. V represents the value of the external voltage. The internal 250 Ω resistor at terminal 9 can be used as a load.. Deviation: at 20 °C (68 °F), 4 … 20 mA≤ 10 µA incl. calibration, linearity, hysteresis, loads and fluctuations of supply voltage. Influence of ambient temperature≤ 0.25 µA/K: . Influence of ambient temperature: ≤ 0.25 µA/K. Frequency range: input to output: bandwidth with 0.5 Vpp signal 0 … 7.5 kHz (-3 dB) output to input: bandwidth with 0.5 Vpp signal 0.3 … 7.5 kHz (-3 dB). Settling time: 200 µs. Rise time/fall time: 100 µs. Input/Output: basic insulation according to IEC 61010-1, rated insulation voltage 300 Veff. Input/power supply: basic insulation according to IEC 61010-1, rated insulation voltage 300 Veff. Output/power supply: functional insulation, rated insulation voltage 50 V AC. Display elements: LED. Labeling: space for labeling at the front. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013 (industrial locations): . Directive 2014/30/EU: EN 61326-1:2013 (industrial locations). Electromagnetic compatibility: NE 21:2012 EN 61326-3-2:2008. Degree of protection: IEC 60529:2001. Protection against electrical shock: UL 61010-1:2012. Ambient temperature: -20 … 70 °C (-4 … 158 °F). Degree of protection: IP20. Connection: screw terminals. Mass: approx. 200 g. Dimensions: 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) (W x H x D) , housing type B2. Height124 mmWidth20 mmDepth115 mm: . Height: 124 mm. Width: 20 mm. Depth: 115 mm. Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs KFD2-STC5-1 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs KFD2-GS-1.2W

sales@partnerplc.com — Tue, 20 Jan 2026 13:29:33 +0000

Current/Voltage Trip Value. 1-channel signal conditioner, 24 V DC supply (Power Rail), Current and voltage input, 2 relay contact outputs, Programmable high/low alarm, Configurable via DIP switches and potentiometer, Terminal blocks with test sockets, Housing width: 20 mm, Number of channels: 1-channel, Test sockets, Programmable high/low alarm, Rated voltage: 20 … 30 V DC, Signal: 0/4 … 20 mA, Signal [2]: 0/1 … 5 V, Type: 2 x relay (change-over contact). Signal type: Analog input. Connection: Power Rail or terminals 14+, 15-. Rated voltage: 20 … 30 V DC. Rated current: < 50 mA. Power consumption: 0.7; 40 V DC / 2 A resistive load: . Contact loading: 250 V AC / 4 A / cos φ > 0.7; 40 V DC / 2 A resistive load. Output III: device configuration : terminals 4, 5, 6. Deviation: ≤ 1 %. Influence of ambient temperature0.01 % / K of adjusted trip value: . Influence of ambient temperature: 0.01 % / K of adjusted trip value. Input delay: 200 ms. Input/power supply: reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff. Input/output I, II: reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff. Output I, II/power supply: reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff. Display elements: LEDs. Control elements: DIP switch potentiometer. Configuration: via DIP switches via potentiometer. Labeling: space for labeling at the front. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013 (industrial locations): . Directive 2014/30/EU: EN 61326-1:2013 (industrial locations). Low voltage: . Directive 2014/35/EUEN 61010-1:2010: . Directive 2014/35/EU: EN 61010-1:2010. Degree of protection: IEC 60529. Protection against electrical shock: EN 61010-1:2010. Ambient temperature: -20 … 60 °C (-4 … 140 °F) extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions. Degree of protection: IP20. Connection: screw terminals. Mass: approx. 120 g. Dimensions: 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) (W x H x D) , housing type B2. Height124 mmWidth20 mmDepth115 mm: . Height: 124 mm. Width: 20 mm. Depth: 115 mm. Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs KFD2-GS-1.2W appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs KFD2-EB2.R4A.B

sales@partnerplc.com — Tue, 20 Jan 2026 13:29:32 +0000

Redundant Power Feed Module. Interface for Power Rail, Used for redundant configuration, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indication. Connection: terminals 11+, 12- terminals 8+, 9-. Rated voltage: 20 … 30 V DC The maximum rated operating voltage of the devices plugged onto the Power Rail must not be exceeded.. Fusing: 5 AT/250 V AC recommended maximum utilization of the fuse: 80 %. Power dissipation: ≤ 2.4 W. Connection: Power Rail. Output current: max. 4 A. Output voltage: Ui ≥ rated voltage Ur = Ui – 0.6 V. Fault signal: relay output: NO contact. Contact loading: 30 V AC/ 2 A / cos φ ≥ 0.7 ; 40 V DC/ 2 A. Energized/De-energized delay: approx. 20 ms / approx. 20 ms. Display elements: LEDs. Control elements: DIP switch. Configuration: via DIP switches. Labeling: space for labeling at the front. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013 (industrial locations): . Directive 2014/30/EU: EN 61326-1:2013 (industrial locations). Electromagnetic compatibility: NE 21:2017. Degree of protection: IEC 60529:2001. Ambient temperature: -40 … 60 °C (-40 … 140 °F) extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions. Degree of protection: IP20. Connection: screw terminals. Mass: approx. 100 g. Dimensions: 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2. Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001. Certificate: UL 22 ATEX 2853 X. Marking II 3G Ex ec nC IIC T4 Gc: . Marking: II 3G Ex ec nC IIC T4 Gc. Directive conformity: . Directive 2014/34/EUEN IEC 60079-0:2018+AC:2020 , EN IEC 60079-7:2015+A1:2018 , EN IEC 60079-15:2019: . Directive 2014/34/EU: EN IEC 60079-0:2018+AC:2020 , EN IEC 60079-7:2015+A1:2018 , EN IEC 60079-15:2019. FM approval: FM 22 US 0031 X. Control drawing116-0160: . Control drawing: 116-0160. UL approval: E106378. CSA approval: CoC 1051840. IECEx approval: . IECEx certificateIECEx UL 16.0051XIECEx markingEx ec nC IIC T4 Gc: . IECEx certificate: IECEx UL 16.0051X. IECEx marking: Ex ec nC IIC T4 Gc. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs KFD2-EB2.R4A.B appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs KFD0-TR-1

sales@partnerplc.com — Tue, 20 Jan 2026 13:29:23 +0000

RTD Converter. 1-channel signal conditioner, 24 V DC supply (loop powered), 2- or 3-wire Pt100 RTD input, Output 4 mA … 20 mA, temperature linearization selectable, DIP switch selectable ranges, Sensor breakage detection, Housing width: 20 mm, Number of channels: 1-channel, Rated voltage: 12 … 35 V DC loop powered, Field device: resistance thermometer, Signal: 1 x 4 … 20 mA (current sink). Signal type: Analog input. Rated voltage: 12 … 35 V DC loop powered. Power dissipation: 0.4 W. Connection side: field side. Connection: terminals 1, 2-, 3+ suitable for Pt100, 2- and 3-wire connection. Lead resistance: max. 100 Ω per line. Measuring current: approx. 1 mA. Connection side: control side. Connection: terminals 9+, 8-. Load: (U -12 V) / 0.02 A. Current output: 4 … 20 mA , limited to ≤ 35 mA. Fault signal: sensor burnout: upscaling ≥ 22 mA , limited to ≤ 35 mA. Measuring range: span without linearization 25 … 800 °C (77 … 1472 °F)/ with linearisation 25 … 375 °C (77 … 707 °F)zero point without linearization -200 … 400 °C (-328 … 752 °F)/ with linearisation -30 … 375 °C (-22 … 707 °F)span and zero point adjustable. Deviation: . After calibration0.1 % of full-scale valueInfluence of ambient temperaturespan and zero point 0.015 % / K or ± 10 mΩ / KInfluence of supply voltage6.5 ppm/V: . After calibration: 0.1 % of full-scale value. Influence of ambient temperature: span and zero point 0.015 % / K or ± 10 mΩ / K. Influence of supply voltage: 6.5 ppm/V. Rise time: 250 ms. Input/Output: safe isolation acc. to DIN VDE 0106, rated insulation voltage 253 Veff. Control elements: DIP switch rotary switch. Configuration: via DIP switches via rotary switch. Labeling: space for labeling at the front. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013 (industrial locations): . Directive 2014/30/EU: EN 61326-1:2013 (industrial locations). Insulation coordination: EN 50178. Galvanic isolation: EN 50178. Degree of protection: IEC 60529. Ambient temperature: -20 … 60 °C (-4 … 140 °F) extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions. Degree of protection: IP20. Connection: screw terminals. Mass: approx. 150 g. Dimensions: 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2. Height119 mmWidth20 mmDepth115 mm: . Height: 119 mm. Width: 20 mm. Depth: 115 mm. Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs KFD0-TR-1 appeared first on CentralXL | Industrial Marketplace.