HART Interface Solutions Archives - CentralXL | Industrial Marketplace

Pepperl Fuchs KFD2-HMM-16

sales@partnerplc.com — Tue, 20 Jan 2026 13:29:34 +0000

HART MUX Primary Module. 16-channel, 24 V DC supply (Power Rail), HART field device input (revision 5 to 7), Up to 15 KFD0-HMS-16 HART MUX secondary modules can be connected, Up to SIL 3 acc. to IEC/EN 61508. Safety Integrity Level (SIL): SIL 3. Connection: terminals 17+, 18-. Rated voltage: 20 … 32 V DC typical at 100 mA. Power consumption: max. 3 W. Conformity: HART field device input (revision 5 to 7). Connection: 26-pin flat cable for analog connections 14-pin flat cable for primary module/secondary module connection between KFD2-HMM-16 and KFD0-HMS-16. Leakage current: < 3 µA at -20 … 85 °C (-4 … 185 °F). Terminating resistor: external 230 … 500 Ω standard (up to 1000 Ω possible). Output voltage: ≥ 400 mV ss (with the terminator resistance specified above). Output resistance: 100 Ω or smaller, capacitive coupling. Input impedance: according to HART specification. Input voltage range: 0.08 … 4 V ss ; typ. ± 5.2 V as local reference. Transfer rate: 9600, 19200, or 38400 Bit/s (selectable with DIL switch (2 and 3) by the user). Type: RS-485 , 2-wire multidrop. Address selection: One of 31 possible addresses selectable per DIL switch (4 … 8). Control elements: DIP switch. Configuration: via DIP switches. Labeling: space for labeling at the front. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013 (industrial locations): . Directive 2014/30/EU: EN 61326-1:2013 (industrial locations). Degree of protection: IEC 60529:2001. Ambient temperature: -20 … 60 °C (-4 … 140 °F). Degree of protection: IP20. Connection: screw terminals. Mass: approx. 250 g. Dimensions: 40 x 107 x 115 mm (1.6 x 4.2 x 4.5 inch) (W x H x D) , housing type C1. Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001. Certificate: PF 07 CERT 1143 X. Marking II 3G Ex nA IIC T4 Gc: . Marking: II 3G Ex nA IIC T4 Gc. Directive conformity: . Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-15:2010: . Directive 2014/34/EU: EN 60079-0:2012+A11:2013 , EN 60079-15:2010. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs KFD2-HMM-16 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs KFD0-HMS-16

sales@partnerplc.com — Tue, 20 Jan 2026 13:29:20 +0000

HART MUX Secondary Module. 16-channel, No external power required, HART field device input (revision 5 to 7), Used with HART MUX primary module KFD2-HMM-16, Up to SIL 3 acc. to IEC/EN 61508. Safety Integrity Level (SIL): SIL 3. Connection: via 14-channel flat cable from the KFD2-HMM-16 primary module. Conformity: HART field device input (revision 5 to 7). Connection: 26-pin flat cable for analog connections 14-pin flat cable for primary module/secondary module connection between KFD2-HMM-16 and KFD0-HMS-16. Leakage current: < 3 µA at -20 … 85 °C (-4 … 185 °F). Terminating resistor: external 230 … 500 Ω standard (up to 1000 Ω possible). Output voltage: ≥ 400 mV ss (with the terminator resistance specified above). Output resistance: 100 Ω or smaller, capacitive coupling. Input impedance: according to HART specification. Input voltage range: 0.08 … 4 V ss ; typ. ± 5.2 V as local reference. Labeling: space for labeling at the front. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013 (industrial locations): . Directive 2014/30/EU: EN 61326-1:2013 (industrial locations). Degree of protection: IEC 60529:2001. Ambient temperature: -20 … 65 °C (-4 … 149 °F). Degree of protection: IP20. Mass: approx. 100 g. Dimensions: 20 x 93 x 115 mm (0.8 x 3.7 x 4.5 inch) (W x H x D) , housing type B1. Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001. Certificate: PF 07 CERT 1143 X. Marking II 3G Ex nA IIC T4 Gc: . Marking: II 3G Ex nA IIC T4 Gc. Directive conformity: . Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-15:2010: . Directive 2014/34/EU: EN 60079-0:2012+A11:2013 , EN 60079-15:2010. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs KFD0-HMS-16 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs K-HM26

sales@partnerplc.com — Tue, 20 Jan 2026 13:28:51 +0000

HART Connection Cable with Connectors. K-System accessory, Connection cable for KF*-HM*-16 to Termination Board, 26-pin ribbon cable

The post Pepperl Fuchs K-HM26 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs HM-MT-BT-EX-010041

sales@partnerplc.com — Tue, 20 Jan 2026 13:27:45 +0000

Viator Bluetooth HART Interface. Interface for wireless communication between PC host and HART field devices, Interface for wireless communication between PC host and any HART field device, Registered with HART Communication Foundation, ATEX and IECEx approval, UL listed for North America, Powerful, high-speed Bluetooth with 100 m open-air range, Adaptive frequency hopping to reduce radio-frequency interference, HARTCommDTM software supports use with FDT Frame applications. Battery type: 3 x AAA-size batteries, 1.5 V DC, alkaline cells, type LR03, Energizer® EN92. Operating duration: approx. 20 h (continuous operation). Physical: Bluetooth v2.0, Class 1, EDR. Transmitter frequency: 2402 … 2480 MHz (Bluetooth). Transmitter radiated power: 18 dBm. Detection range: 100 m in air. Antenna: integrated omnidirectional. Signal: HART-compliant trapezoidal wave at 1200/2200 Hz. Radio and telecommunication terminal equipment: . Directive 2014/53/EUEN 300 328 V2.1.1 , EN 301 489-17 V3.1.1: . Directive 2014/53/EU: EN 300 328 V2.1.1 , EN 301 489-17 V3.1.1. RoHS: . Directive 2011/65/EU (RoHS)EN 50581:2012: . Directive 2011/65/EU (RoHS): EN 50581:2012. Hardware requirements: any PC, PDA, laptop, or other computer with Bluetooth capability. Operating system: Windows® , Windows Mobile® or any OS that supports Bluetooth COM port. FCC approval: FCC Part 15 B , FCC ID: T9J-RN41-3. IC approval: ICES-003 , IC ID: 6514A-RN413. Operating temperature: -20 … 50 °C (-4 … 122 °F). Storage temperature: -20 … 60 °C (-4 … 140 °F). Relative humidity: 0 … 95% , non-condensing. Degree of protection: IP20. Connection: HART I/O Interface cable , 0.5 mm² (20 AWG) fine-strand , termination test clips. Material: Polycarbonate. Dimensions: 88 mm x 42 mm x 19 mm. Height19 mmWidth42 mmLength88 mm: . Height: 19 mm. Width: 42 mm. Length: 88 mm. Cable length: 0.5 m. EU-type examination certificate: CML 16 ATEX 2379. Marking II 1G Ex ia IIC T4 Ga , -20 °C ≤ Tamb ≤ 50 °C: . Marking: II 1G Ex ia IIC T4 Ga , -20 °C ≤ Tamb ≤ 50 °C. Directive conformity: . Directive 2014/34/EUEN 60079-0:2012 / A11:2013 , EN 60079-11:2012: . Directive 2014/34/EU: EN 60079-0:2012 / A11:2013 , EN 60079-11:2012. UL approval: E106378. Approved forClass I, Div. 1 or Div. 2 Groups A, B, C, D T4 Class I, Zone 0, AEx ia IIC T4 Ga; Ex ia IIC T4 Ga: . Approved for: Class I, Div. 1 or Div. 2 Groups A, B, C, D T4 Class I, Zone 0, AEx ia IIC T4 Ga; Ex ia IIC T4 Ga. IECEx approval: . IECEx certificateIECEx CML 16.0138IECEx markingEx ia IIC T4 Ga , -20 °C to +50 °C: . IECEx certificate: IECEx CML 16.0138. IECEx marking: Ex ia IIC T4 Ga , -20 °C to +50 °C. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs HM-MT-BT-EX-010041 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs HiSHPTB/32/YOK-AI-R-02

sales@partnerplc.com — Tue, 20 Jan 2026 13:27:44 +0000

HART Termination Board. Yokogawa Centum 3000 CS AAI135 replacement FTA, 32 channels of I/O, 2- or 3-wire or self powered transmitters, Short-circuit protected, Plug-n-play wiring capabilities, Number of channels: 32 unbalanced signal loops. Rated voltage: 20 … 30 V DC. Fusing: 3.15 A , 5 x 20 mm (0.2 x 0.8 inch). Power dissipation: 0.7 W , with Multiplexer. Reverse polarity protection: no. HART signal channels: . Number of channels32 unbalanced signal loops: . Number of channels: 32 unbalanced signal loops. Supply: no. HART signal channels: 30 V DC. Ambient temperature: 0 … 55 °C (32 … 131 °F). Relative humidity: 5 … 90 %, non-condensing. Core cross section: 2.5 mm2 (16 AWG). Connection: field side: screw terminalscontrol side: KS connector (proprietary)RS 485 interface: removable screw terminalspower: removable screw terminals. Mass: approx. 500 g. Dimensions: 330 x 107 x 208 mm (12.9 x 4.2 x 8.2 inch) (W x H x D) , depth including module assembly with HiDMux2700. Height107 mmWidth330 mmDepth208 mm: . Height: 107 mm. Width: 330 mm. Depth: 208 mm. Mounting: DIN rail mounting. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs HiSHPTB/32/YOK-AI-R-02 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs HiSHPTB/32/TR-AO-01

sales@partnerplc.com — Tue, 20 Jan 2026 13:27:43 +0000

HART Termination Board. Triconex 3805E replacement FTA, 32 channels of I/O, Outputs: 4 x 8 channels, 4 mA … 20 mA current loop, DC coupled, Short-circuit protected, HART analog output filters, Number of channels: 32 unbalanced signal loops. Rated voltage: 20 … 30 V DC. Fusing: 3.15 A , 5 x 20 mm (0.2 x 0.8 inch). Power dissipation: 0.7 W , with Multiplexer. Reverse polarity protection: yes. HART signal channels: . Number of channels32 unbalanced signal loops: . Number of channels: 32 unbalanced signal loops. Supply: yes. HART signal channels: 30 V DC. Ambient temperature: 0 … 55 °C (32 … 131 °F). Relative humidity: 5 … 90 %, non-condensing. Core cross section: 2.5 mm2 (16 AWG). Connection: field side: screw terminalscontrol side: 56-pin Elco connectorRS 485 interface: removable screw terminalspower: removable screw terminals. Mass: approx. 500 g. Dimensions: 333 x 125 x 208 mm (13.1 x 4.9 x 8.2 inch) (W x H x D) , depth including module assembly with HiDMux2700. Height125 mmWidth333 mmDepth208 mm: . Height: 125 mm. Width: 333 mm. Depth: 208 mm. Mounting: DIN rail mounting. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs HiSHPTB/32/TR-AO-01 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs HiSHPTB/32/TR-AI-01

sales@partnerplc.com — Tue, 20 Jan 2026 13:27:42 +0000

HART Termination Board. Triconex 3700A and 3721 replacement FTA, 2- or 3-wire or self powered transmitters, Outputs: 2 x 16 channels, 0 V … 10 V differential, DC coupled (makes 32 channels), Short-circuit protected, Plug-n-play wiring capabilities, Number of channels: 32 unbalanced signal loops. Rated voltage: 20 … 30 V DC. Fusing: 3.15 A , 5 x 20 mm (0.2 x 0.8 inch). Power dissipation: 0.7 W , with Multiplexer. Reverse polarity protection: yes. HART signal channels: . Number of channels32 unbalanced signal loops: . Number of channels: 32 unbalanced signal loops. Supply: yes. HART signal channels: 30 V DC. Ambient temperature: 0 … 55 °C (32 … 131 °F). Relative humidity: 5 … 90 %, non-condensing. Core cross section: 2.5 mm2 (16 AWG). Connection: field side: screw terminalscontrol side: 56-pin Elco connectorRS 485 interface: removable screw terminalspower: removable screw terminals. Mass: approx. 500 g. Dimensions: 256 x 125 x 208 mm (10 x 4.9 x 8.2 inch) (W x H x D) , depth including module assembly with HiDMux2700. Height125 mmWidth256 mmDepth208 mm: . Height: 125 mm. Width: 256 mm. Depth: 208 mm. Mounting: DIN rail mounting. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs HiSHPTB/32/TR-AI-01 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs HiSHPTB/32/HONB-AO-R-01

sales@partnerplc.com — Tue, 20 Jan 2026 13:27:41 +0000

HART Termination Board. TDC 3000 replacement FTA, Short-circuit protected, HART analog output filters, Redundant PCS wirings, Redundant power supply connections, Field terminal blocks that are Honeywell FTA compatible, Honeywell “B” size footprint, Number of channels: 32 unbalanced signal loops. Rated voltage: 24 V DC. Fusing: 315 mA , 5 x 20 mm (0.2 x 0.8 inch). Power dissipation: 0.7 W , with Multiplexer. Reverse polarity protection: yes. HART signal channels: . Number of channels32 unbalanced signal loops: . Number of channels: 32 unbalanced signal loops. Supply: yes. HART signal channels: 30 V DC. Ambient temperature: 0 … 55 °C (32 … 131 °F). Relative humidity: 5 … 90 %, non-condensing. Core cross section: 2.5 mm2 (16 AWG). Connection: field side: 5.08 mm removable screw terminalscontrol side: 50-pin Centronics plugRS-485 interface: 5.08 mm removable screw terminalspower: removable screw terminals. Mass: approx. 500 g. Dimensions: 333 x 127 x 190 mm (13.1 x 5 x 7.5 inch) (W x H x D) , depth including module assembly with HiDMux2700. Height127 mmWidth333 mmDepth190 mm: . Height: 127 mm. Width: 333 mm. Depth: 190 mm. Mounting: DIN rail mounting. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs HiSHPTB/32/HONB-AO-R-01 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs HiS1132/CON8-H-LTX-02

sales@partnerplc.com — Tue, 20 Jan 2026 13:27:39 +0000

HART Termination Board. APACS/QUADLOG replacement FTA, Bailey Infi 90 replacement FTA, Product connector; PCS wiring, Easy switch selectable configurations for AO and AI, Number of channels: 32 unbalanced signal loops. Rated voltage: 20 … 30 V DC. Fusing: 3.15 A , 5 x 20 mm (0.2 x 0.8 inch). Power dissipation: 0.7 W , with Multiplexer. Reverse polarity protection: yes. HART signal channels: . Number of channels32 unbalanced signal loops: . Number of channels: 32 unbalanced signal loops. Supply: yes. HART signal channels: 30 V DC. Ambient temperature: 0 … 55 °C (32 … 131 °F). Relative humidity: 5 … 90 %, non-condensing. Core cross section: 2.5 mm2 (16 AWG). Connection: field side: fixed screw terminalscontrol side: PCS-specified connectorRS 485 interface: removable screw terminalspower: removable screw terminals. Mass: approx. 700 g. Dimensions: 333 x 125 x 208 mm (13.1 x 4.9 x 8.2 inch) (W x H x D) , depth including module assembly with HiDMux2700. Height125 mmWidth333 mmDepth208 mm: . Height: 125 mm. Width: 333 mm. Depth: 208 mm. Mounting: DIN rail mounting. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs HiS1132/CON8-H-LTX-02 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs FI-PFH-NS0137-R

sales@partnerplc.com — Tue, 20 Jan 2026 13:26:52 +0000

HART Termination Board. Connection board for K-System HART Multiplexer, 16-channel, Interface for series connection or parallel connection, Integrated, switchable 220 Ω resistor, Connection via screw terminals. Load resistor: 220 Ω , switchable on. Type: multiplexer connection : IDC plug, 26-pin. Rated current: max. 30 mA per channel. Control elements: DIP switch. DIP switch: selection of operating mode:- ON: without load resistor- OFF: with load resistor. Factory setting: DIP switches S1 and S2: ON. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013 (industrial locations): . Directive 2014/30/EU: EN 61326-1:2013 (industrial locations). Electromagnetic compatibility: NE 21:2017For further information see system description.. Degree of protection: IEC 60529:2001. Shock resistance: EN 60068-2-27. Vibration resistance: EN 60068-2-6. Ambient temperature: 0 … 50 °C (32 … 122 °F). Storage temperature: -15 … 50 °C (5 … 122 °F). Relative humidity: ≤ 93 % non-condensing. Shock resistance: 15 g , 11 ms. Vibration resistance: 1 g , 10 … 150 Hz. Degree of protection: IP20. Connection: . Field sidescrew terminals , greenControl sidescrew terminals , green HART : 1 x IDC plug, 26-pin: . Field side: screw terminals , green. Control side: screw terminals , green HART : 1 x IDC plug, 26-pin. Core cross section: 0.25 … 1.5 mm2 (24 … 16 AWG). Material: . HousingPVC: . Housing: PVC. Mass: approx. 210 g. Dimensions: 110 x 125 x 61 mm (4.3 x 4.9 x 2.4 inch) (W x H x D). Height125 mmWidth110 mmDepth61 mm: . Height: 125 mm. Width: 110 mm. Depth: 61 mm. Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001. Certificate: PF 11 CERT 1930 X. Marking II 3G Ex nA IIC T4 Gc: . Marking: II 3G Ex nA IIC T4 Gc. Directive conformity: . Directive 2014/34/EUEN IEC 60079-0:2018+AC:2020 , EN 60079-15:2010: . Directive 2014/34/EU: EN IEC 60079-0:2018+AC:2020 , EN 60079-15:2010. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

The post Pepperl Fuchs FI-PFH-NS0137-R appeared first on CentralXL | Industrial Marketplace.