Safety at Work Archives - CentralXL | Industrial Marketplace

Pepperl Fuchs VBA-4E1A-KE3-ZEJ/SR

sales@partnerplc.com — Tue, 20 Jan 2026 13:51:41 +0000

AS-Interface safety module. KE3 control cabinet module, 4 inputs, 1 control-safe relay output. Node type: A/B node. AS-Interface specification: V2.1. Required gateway specification: ≥ V2.1. UL File Number: E223772. Safety Integrity Level (SIL): SIL 3. Performance level (PL): PL e. LED FAULT: error display; LED redred: communication error. LED PWR: AS-Interface voltage; LED green. LED IN: switching state (input); 4 LED yellow. LED OUT: For flashing patterns see diagnostics table. LED ALARM: PLC reports alarm; red LED. Auxiliary voltage (input): 12 … 30 V DC PELV. Rated operating voltage: 26.5 … 31.6 V from AS-Interface. Rated operating current: ≤ 30 mA (without sensors) / max. 200 mA. Protection class: III. Surge protection: UEXT, Ue: Over voltage category III, safe isolated power supplies (PELV). Number/Type: 4 inputs for 2- or 3-wire sensors (PNP), DC. Supply: from AS-Interface. Voltage: 21 … 31 V DC. Current loading capacity: ≤ 90 mA, overload- and short-circuit proof (INT). Input current: ≤ 8 mA (limited internally). Sensor supply: ≤ 90 mA. Switching point: according to DIN EN 61131-2 (Type 2). 0 (unattenuated)≤ 2 mA1 (attenuated)≥ 4 mA: . 0 (unattenuated): ≤ 2 mA. 1 (attenuated): ≥ 4 mA. Signal delay: < 2 ms (input/AS-Interface). Signal frequency: ≤ 250 Hz. Number/Type: 1 safety relay output. Supply: from AS-Interface. Nominal load: . Per contact3 A / 24 V DC; 3 A / 230 V AC: . Per contact: 3 A / 24 V DC; 3 A / 230 V AC. Usage category: DC-13 and AC-15. Electromagnetic compatibility: . Directive 2014/30/EUEN 62026-2:2013 EN 61000-6-2:2005, EN 61000-6-4:2007: . Directive 2014/30/EU: EN 62026-2:2013 EN 61000-6-2:2005, EN 61000-6-4:2007. Degree of protection: EN 60529:2000. Input: EN 61131-2. Emitted interference: EN 61000-6-4:2007. AS-Interface: EN 62026-2:2013. Noise immunity: EN 61000-6-2:2005 EN 62026-2:2013. Profile: S-7.A.E. IO code: 7. ID code: A. ID1 code: 5 (Can be changed to 7 or F). ID2 code: E. Data bits (function via AS-Interface): InputOutput. D0 E0 LED ALARM Diagnosis (see table Device colors)D1 E1 OUT1 (see P1)D2 E2 -D3 E3 = 1.Y1 -: . D0: E0 LED ALARM Diagnosis (see table Device colors). D1: E1 OUT1 (see P1). D2: E2 -. D3: E3 = 1.Y1 -. Parameter bits (programmable via AS-i): function. P0not usedP1Output linkage:P1 = 1: safe output switches on release.P1 = 0: safe output switches on release and OUT1=1P2ID1=5not usedID1=7 or FP2 = 0 IN3 is inputP2 = 1 IN3 notifies of releaseP3not used: . P0: not used. P1: Output linkage:P1 = 1: safe output switches on release.P1 = 0: safe output switches on release and OUT1=1. P2: ID1=5not usedID1=7 or FP2 = 0 IN3 is inputP2 = 1 IN3 notifies of release. P3: not used. Ambient temperature: 0 … 55 °C (32 … 131 °F). Storage temperature: -25 … 85 °C (-13 … 185 °F). Degree of protection: IP20. Connection: removable terminalsrated connection capacity:rigid/flexible (with and without wire-end ferrules): 0.25 mm2 … 2.5 mm2for multiple-wire connection with two wires of equal cross-section:flexible with twin wire-end ferrules: 0.5 mm2 … 1.5 mm2. Material: . HousingPA 66-FR: . Housing: PA 66-FR. Dimensions: . Height99 mmWidth22.5 mmLength107 mm: . Height: 99 mm. Width: 22.5 mm. Length: 107 mm. Mounting: DIN mounting rail

The post Pepperl Fuchs VBA-4E1A-KE3-ZEJ/SR appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs VAZ-IER2-ACTUATOR2-S

sales@partnerplc.com — Tue, 20 Jan 2026 13:51:15 +0000

Activator. Actuator for non-contact AS-Interface Reed safety switch. Detection type: magnetic. Center offset: ± 2.5 mm at distance s = 3 mm. UL File Number: E155795. Electromagnetic compatibility: . Directive 2014/30/EUEN 62026-2:2013 IEC 60947-5-3:1999: . Directive 2014/30/EU: EN 62026-2:2013 IEC 60947-5-3:1999. Machinery Directive: . Directive 2006/42/ECEN ISO 12100-1, -2:2003 EN 1088:1995+A2:2008: . Directive 2006/42/EC: EN ISO 12100-1, -2:2003 EN 1088:1995+A2:2008. Degree of protection: EN 60529:2000. AS-Interface: EN 62026-2:2013. Functional safety: ISO 13849-1:2008 (up to category 3/PL e) EN ISO 12100-1, -2:2003 EN 1088:1995+A2:2008. Ambient temperature: -20 … 60 °C (-4 … 140 °F). Degree of protection: IP67. Material: . HousingPPS: . Housing: PPS. Installation: Active surface facing Read head. Mass: 20 g. Dimensions: . Width26.2 mmDepth13 mmLength36 mm: . Width: 26.2 mm. Depth: 13 mm. Length: 36 mm. Scope of delivery: 1 actuator; 2 safety screws, M4 x 14

The post Pepperl Fuchs VAZ-IER2-ACTUATOR2-S appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs VAS-4A16L-K31

sales@partnerplc.com — Tue, 20 Jan 2026 13:50:58 +0000

AS-Interface Safety Monitor. Safety Monitor, 16 decentralized output circuits. AS-Interface specification: V3.0. PLC-Functionality: none. Duplicate address detection: from AS-Interface slaves. Earth fault detection: integrated. EMC monitoring: integrated. Diagnostics function: Extended function via display. Switch-on delay: < 10 s. Response delay: < 40 ms. UL File Number: E223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source. Safety Integrity Level (SIL): SIL 3. Performance level (PL): PL e. MTTFd: 200 a. B10d: 2 E+7. Display: Illuminated graphical LC display for addressing and error messages. LED FAULT: Error display; red LEDred: Communication errorred flashing: release circuit error. LED POWER: voltage ON; LED green. LED U AS-i 1 / U AS-i 2: AS-Interface voltage – circuit 1/circuit 2; green LED. LED ready: off: -constantly lit: startup/restart lock activeflashing: external test required. LED AUX: ext. auxiliary voltage UAUX ; LED green. LED EDM/Start: External device monitoring circuit inputs closed, 4x yellow LEDs. LED output circuit: Output circuit closed; 4 x green LEDs. Button: 4. Insulation voltage: ≥ 500 V. Rated operating voltage: 26.5 … 31.6 V from AS-Interface; 24 V DC. Rated operating current: ≤ 200 mA from 24 VDC≤ 45 mA from AS-Interface. Interface type: RS 232, serial. Transfer rate: 19.6 kbaud, no parity, 1 start bit, 1 stop bit, 8 data bits. Interface type: Chip card slot. Number/Type: 4 EDM/Start inputs:EDM: Inputs for the external device monitoring circuitsStart: start inputs:Static switching current 4 mA at 24 V, dynamic 30 mA at 24 V (T=100 μs). Safety output: Output circuits 1 and 2: 2 potential-free contacts,max. contact load:3 ADC-13 at 30 VDC,3 AAC-15 at 30 VACOutput circuits 3 and 4: 2 PNP transistor outputsmax. contact load:0.5 ADC-13 at 30 VDC. AS-Interface: spring terminals, removable. Electromagnetic compatibility: . Directive 2014/30/EUEN 62026-2:2013 EN 61000-6-2:2005, EN 61000-6-4:2007: . Directive 2014/30/EU: EN 62026-2:2013 EN 61000-6-2:2005, EN 61000-6-4:2007. Electromagnetic compatibility: EN 61000-6-2:2005, EN 61000-6-4:2007. Degree of protection: EN 60529:2000. AS-Interface: EN 62026-2:2013. Shock resistance: EN 61131-2:2004. Standards: EN 61000-6-2:2005, EN 61000-6-4:2007 EN 954-1:1996 (up to Kategorie 4), IEC 61508:2001 and EN 62061:2005 (up to SIL3) EN 13849:2008 (PL e). UL approval: An isolated source with a secondary open circuit voltage of ≤ 30 VDC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed. UL mark does not provide UL certification for any functional safety rating or aspects of the device.. Ambient temperature: 0 … 55 °C (32 … 131 °F). Storage temperature: -25 … 85 °C (-13 … 185 °F). Degree of protection: IP20. Material: . HousingStainless steel: . Housing: Stainless steel. Mass: 800 g. Dimensions: . Height120 mmWidth85 mmLength89 mm: . Height: 120 mm. Width: 85 mm. Length: 89 mm. Construction type: Low profile housing , Stainless steel

The post Pepperl Fuchs VAS-4A16L-K31 appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs VAA-2E1A-G10-SAJ/EA2J-1M

sales@partnerplc.com — Tue, 20 Jan 2026 13:50:40 +0000

AS-Interface safety module. G10 safety module, 2 safety-related inputs and 1 standard electronic output. Node type: Safety-Slave. AS-Interface specification: V3.0. Required gateway specification: ≥ V2.1. UL File Number: E223772 “For use in NFPA 79 Applications only”. LED FLT: error display; LED redred: communication error or address is 0. LED AS-i: AS-Interface voltage; green LEDgreen: voltage OKflashing green: address 0. LED IN: switching state (input); 2 LED yellow. LED OUT: Switching state (output); LED yellow. Rated operating voltage: 26.5 … 31.6 V from AS-Interface (PELV). Rated operating current: ≤ 90 mA. Protection class: III. Surge protection: overvoltage category III. Rated insulation voltage: 32 V. Pulse withstand voltage: 0.8 kV. Number/Type: 2 safety-related inputs for mechanical contacts, crossed-circuit monitored:2 single-channel contacts: up to category 2/PL c to ISO 13849-1 or1 2-channel contact: up to category 4/PL e to ISO 13849-1. Supply: from AS-Interface. Voltage: 20 … 30 V DC pulsed. Current: input current limited ≤ 15 mA,short-circuit protected. Number/Type: 1 conventional electronic output, PNP. Supply: from AS-Interface. Voltage: (UASI – 7.0 V) ≤ UOUT ≤ UASI. Current: 50 mA , short-circuit/overload protected. Electromagnetic compatibility: . Directive 2014/30/EUEN 62026-2:2013 EN 61000-6-2:2005 EN 61000-6-4:2007: . Directive 2014/30/EU: EN 62026-2:2013 EN 61000-6-2:2005 EN 61000-6-4:2007. Machinery Directive: . Directive 2006/42/ECEN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015: . Directive 2006/42/EC: EN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015. Degree of protection: EN 60529:2000. Fieldbus standard: EN 62026-2:2013. Electrical safety: IEC 61140:2009. Emitted interference: EN 61000-6-4:2007. AS-Interface: EN 62026-2:2013. Noise immunity: IEC 62026-2:2013 EN 62061:2005 EN 61000-6-2:2005. Functional safety: EN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015. Profile: S-7.B. IO code: 7. ID code: B. ID1 code: F. ID2 code: 0. Data bits (function via AS-Interface): InputOutput. D0 dyn. safety code 1 OUT 1D1 dyn. safety code 1 -D2 dyn. safety code 2 -D3 dyn. safety code 2 -: . D0: dyn. safety code 1 OUT 1. D1: dyn. safety code 1 -. D2: dyn. safety code 2 -. D3: dyn. safety code 2 -. Parameter bits (programmable via AS-i): function. P0communication monitoringP0 = 1 (default settings), monitoring = ON, i.e. if communication fails, the outputs are de-energised P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their conditionP1not usedP2not usedP3not used: . P0: communication monitoringP0 = 1 (default settings), monitoring = ON, i.e. if communication fails, the outputs are de-energised P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their condition. P1: not used. P2: not used. P3: not used. UL approval: cULus Listed, Type 1 enclosure. Ambient temperature: -20 … 60 °C (-4 … 140 °F). Storage temperature: -25 … 80 °C (-13 … 176 °F). Relative humidity: 8 x cable diameter, fixed installation > 10 x cable diameter, movable installation not appropriate for conveyor chainsColorblackCores6 x 0.25 mm2LengthL1 m: . Sheath diameter: ∅4.8 mm. Bending radius: > 8 x cable diameter, fixed installation > 10 x cable diameter, movable installation not appropriate for conveyor chains. Color: black. Cores: 6 x 0.25 mm2. Length: 1 m. Mass: 200 g. Tightening torque, fastening screws: 1.65 Nm. Dimensions: . Height21.5 mmWidth27.7 mmLength40.5 mm: . Height: 21.5 mm. Width: 27.7 mm. Length: 40.5 mm

The post Pepperl Fuchs VAA-2E1A-G10-SAJ/EA2J-1M appeared first on CentralXL | Industrial Marketplace.

Pepperl Fuchs VAA-2E-IER2-S-1M-V1

sales@partnerplc.com — Tue, 20 Jan 2026 13:50:39 +0000

Read head and evaluation unit. Reed safety switch for non-contact AS-Interface safety switches. Detection type: magnetic. assured start-up distance: 7 mm. assured release distance: max. 40 mm. Center offset: ± 2.5 mm at distance s = 3 mm. Node type: Safety node. AS-Interface specification: V3.0. Required gateway specification: ≥ V2.0. Profile: S-0.B. IO code0ID codeBID1 codeFID2 codeE: . IO code: 0. ID code: B. ID1 code: F. ID2 code: E. Response delay: < 5 ms. UL File Number: E155795. Safety Integrity Level (SIL): SIL 3. Performance level (PL): PL e. Mission Time (TM): 20 a. PFHd: 4.29 E-8. Rated operating voltage: 26.5 … 31.6 V from AS-Interface. Rated operating current: ≤ 30 mA. Power supply: via AS-Interface network. Electromagnetic compatibility: . Directive 2014/30/EUEN 62026-2:2013+A1:2019 EN 60947-5-3:2013: . Directive 2014/30/EU: EN 62026-2:2013+A1:2019 EN 60947-5-3:2013. Machinery Directive: . Directive 2006/42/ECEN ISO 13849-1:2015 EN ISO 14119:2013: . Directive 2006/42/EC: EN ISO 13849-1:2015 EN ISO 14119:2013. Degree of protection: EN 60529:2000. AS-Interface: EN 62026-2:2013+A1:2019. Functional safety: ISO 13849-1:2008 (up to category 3/PL e) EN ISO 12100-1, -2:2003 EN 1088:1995+A2:2008. Ambient temperature: -20 … 60 °C (-4 … 140 °F). Shock and impact resistance: 30 g/11 ms. Degree of protection: IP67. Connection: with fixed cable and M12 connector, 4-pin. Material: . HousingPPSCablePUR: . Housing: PPS. Cable: PUR. Installation: any position. Dimensions: . Width26.2 mmDepth13 mmLength36 mm: . Width: 26.2 mm. Depth: 13 mm. Length: 36 mm. Cable length: 1 m. Life span: 100 x 106 switching cycles

The post Pepperl Fuchs VAA-2E-IER2-S-1M-V1 appeared first on CentralXL | Industrial Marketplace.